My understanding is that a well known linux vendor was disabling kernel ACPI APEI & EINJ parameter support by default.
"ACPI provides an error injection mechanism, EINJ, for debugging and testing the ACPI Platform Error Interface (APEI) and other RAS features. If supported by the firmware, ACPI specification 5.0 and later provide for a way to specify a physical memory address to which to inject the error. Injecting errors through EINJ can produce errors which to the platform are indistinguishable from real hardware errors. This can have undesirable side-effects, such as causing the platform to mark hardware as needing replacement. While it does not provide a method to load unauthenticated privileged code, the effect of these errors may persist across reboots and affect trust in the underlying hardware, so disable error injection through EINJ if securelevel is set." Regards Patrick > On Jun 15, 2019, at 3:02 AM, Richard Laysell <mlopenb...@xiphosura.co.uk> > wrote: > > > Hello, > > I was trying OpenBSD on a Supermicro A2SDi-4C-HLN4F which uses an Intel > Atom CPU (Denverton). The board boots but most devices are not > detected because ACPI can't be enabled. > > Does anyone know if this is likely to be supported at some point? > > Full dmesg is below > > OpenBSD 6.5 (RAMDISK_CD) #3: Sat Apr 13 14:55:38 MDT 2019 > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD > real mem = 17125621760 (16332MB) > avail mem = 16602619904 (15833MB) > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 3.0 @ 0x7f0c3000 (35 entries) > bios0: vendor American Megatrends Inc. version "1.1b" date 12/17/2018 > bios0: Supermicro Super Server > acpi0 at bios0: rev 2, can't enable ACPI > cpu0 at mainbus0: (uniprocessor) > cpu0: Intel(R) Atom(TM) CPU C3558 @ 2.20GHz, 2200.41 MHz, 06-5f-01 > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA,IBRS,IBPB,STIBP,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES > cpu0: 2MB 64b/line 16-way L2 cache > cpu0: cannot disable silicon debug > cpu0: mwait min=64, max=64, C-substates=0.2.0.2, IBE > pci0 at mainbus0 bus 0 > 0:31:5: mem address conflict 0xfe010000/0x1000 > pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x1980 rev 0x11 > pchb1 at pci0 dev 4 function 0 vendor "Intel", unknown product 0x19a1 rev 0x11 > vendor "Intel", unknown product 0x19a2 (class system subclass root complex > event, rev 0x11) at pci0 dev 5 function 0 not configured > ppb0 at pci0 dev 6 function 0 vendor "Intel", unknown product 0x19a3 rev 0x11 > pci1 at ppb0 bus 1 > vendor "Intel", unknown product 0x19e2 (class processor subclass > Co-processor, rev 0x11) at pci1 dev 0 function 0 not configured > ppb1 at pci0 dev 10 function 0 vendor "Intel", unknown product 0x19a5 rev 0x11 > pci2 at ppb1 bus 2 > ppb2 at pci0 dev 16 function 0 vendor "Intel", unknown product 0x19aa rev 0x11 > pci3 at ppb2 bus 3 > ppb3 at pci0 dev 17 function 0 vendor "Intel", unknown product 0x19ab rev 0x11 > pci4 at ppb3 bus 4 > ppb4 at pci4 dev 0 function 0 "ASPEED Technology AST1150 PCI" rev 0x03 > pci5 at ppb4 bus 5 > "ASPEED Technology AST2000" rev 0x30 at pci5 dev 0 function 0 not configured > vendor "Intel", unknown product 0x19ac (class system subclass miscellaneous, > rev 0x11) at pci0 dev 18 function 0 not configured > ahci0 at pci0 dev 19 function 0 vendor "Intel", unknown product 0x19b2 rev > 0x11: unable to map interrupt > ahci1 at pci0 dev 20 function 0 vendor "Intel", unknown product 0x19c2 rev > 0x11: unable to map interrupt > xhci0 at pci0 dev 21 function 0 vendor "Intel", unknown product 0x19d0 rev > 0x11: couldn't map interrupt > ppb5 at pci0 dev 22 function 0 vendor "Intel", unknown product 0x19d1 rev 0x11 > pci6 at ppb5 bus 6 > vendor "Intel", unknown product 0x15e4 (class network subclass ethernet, rev > 0x11) at pci6 dev 0 function 0 not configured > vendor "Intel", unknown product 0x15e4 (class network subclass ethernet, rev > 0x11) at pci6 dev 0 function 1 not configured > ppb6 at pci0 dev 23 function 0 vendor "Intel", unknown product 0x19d2 rev 0x11 > pci7 at ppb6 bus 7 > vendor "Intel", unknown product 0x15e5 (class network subclass ethernet, rev > 0x11) at pci7 dev 0 function 0 not configured > vendor "Intel", unknown product 0x15e5 (class network subclass ethernet, rev > 0x11) at pci7 dev 0 function 1 not configured > vendor "Intel", unknown product 0x19d3 (class communications subclass > miscellaneous, rev 0x11) at pci0 dev 24 function 0 not configured > vendor "Intel", unknown product 0x19dc (class bridge subclass ISA, rev 0x11) > at pci0 dev 31 function 0 not configured > vendor "Intel", unknown product 0x19de (class memory subclass miscellaneous, > rev 0x11) at pci0 dev 31 function 2 not configured > vendor "Intel", unknown product 0x19df (class serial bus subclass SMBus, rev > 0x11) at pci0 dev 31 function 4 not configured > vendor "Intel", unknown product 0x19e0 (class serial bus unknown subclass > 0x80, rev 0x11) at pci0 dev 31 function 5 not configured > isa0 at mainbus0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > com0: console > com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo > efifb0 at mainbus0: 1920x1200, 32bpp > wsdisplay at efifb0 not configured > softraid0 at root > scsibus0 at softraid0: 256 targets > root on rd0a swap on rd0b dump on rd0b > erase ^?, werase ^W, kill ^U, intr ^C, status ^T > > Welcome to the OpenBSD/amd64 6.5 installation program. > (I)nstall, (U)pgrade, (A)utoinstall or (S)hell? > > > Regards, > > Richard > > > >
