> Provide a dmesg before you rant. > Thanks, > Brian
>> On Jun 24, 2019, at 5:06 PM, 3 <ba...@yandex.ru> wrote: >> >> i know that wifi adapters never worked in obsd(excluding those >> adapters for which drivers were written by vendors), but i found one >> that shows signs of life in 11n(11ac 2t2r supported by chip). it can >> be bought anywhere where there are samsung tv. moreover it even works >> in hostap mode(unlike the buggy athn). >> but without a ton of bugs not done: >> bwfm0: could not read register: TIMEOUT >> bwfm0: could not open rx pipe: IN_USE >> bwfm0: could not init bus >> bwfm0: firmware did not start up >> ..and sometimes kernel panic on boot, but works would still! >> meet https://wikidevi.com/wiki/Samsung_WCH730B >> bwfm0 at uhub0 port 1 configuration 1 interface 0 "Broadcom BCMUSB 802.11 >> Wireless Adapter" rev 2.10/0.01 addr 2 >> photo without cover: http://pichost.org/images/2019/06/24/Untitled-138.jpg >> it is shown where to solder the wires for wifi. on the right through >> two pins(ground is first) is bluetooth, but for obsd this does not >> matter(thx theo). >> data sheet for chip: https://www.cypress.com/file/310246/download >> for what? but as you wish. if you want to see driver's error messages or kernel panic just say it because they do not always appear. but we both know it is a waste of time and it will not lead to anything. OpenBSD 6.5 (BABUT) #6: Sun May 19 18:12:47 MSK 2019 r...@gw.pesec.cf:/usr/src/sys/arch/amd64/compile/BABUT real mem = 8481652736 (8088MB) avail mem = 8214913024 (7834MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xabaac000 (49 entries) bios0: vendor American Megatrends Inc. version "5.11" date 04/13/2018 acpi0 at bios0: rev 2 acpi0: sleep states S0 S5 acpi0: tables DSDT FACP APIC FPDT FIDT MCFG SSDT SSDT SSDT UEFI LPIT CSRT acpi0: wakeup devices SIO1(S0) BRC1(S0) XHC1(S4) HDEF(S4) PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Celeron(R) CPU J3160 @ 1.60GHz, 1600.32 MHz, 06-4c-04 cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT,MELTDOWN cpu0: 1MB 64b/line 16-way L2 cache cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 80MHz cpu0: mwait min=64, max=64, C-substates=0.2.0.0.0.0.3.3, IBE cpu1 at mainbus0: apid 2 (application processor) cpu1: Intel(R) Celeron(R) CPU J3160 @ 1.60GHz, 1600.00 MHz, 06-4c-04 cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT,MELTDOWN cpu1: 1MB 64b/line 16-way L2 cache cpu1: smt 0, core 1, package 0 cpu2 at mainbus0: apid 4 (application processor) cpu2: Intel(R) Celeron(R) CPU J3160 @ 1.60GHz, 1600.01 MHz, 06-4c-04 cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT,MELTDOWN cpu2: 1MB 64b/line 16-way L2 cache cpu2: smt 0, core 2, package 0 cpu3 at mainbus0: apid 6 (application processor) cpu3: Intel(R) Celeron(R) CPU J3160 @ 1.60GHz, 1600.03 MHz, 06-4c-04 cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT,MELTDOWN cpu3: 1MB 64b/line 16-way L2 cache cpu3: smt 0, core 3, package 0 ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 115 pins acpimcfg0 at acpi0 acpimcfg0: addr 0xe0000000, bus 0-255 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 1 (RP01) acpiprt2 at acpi0: bus 2 (RP02) acpiprt3 at acpi0: bus 3 (RP03) acpiprt4 at acpi0: bus 4 (RP04) acpiec0 at acpi0: not present acpicpu0 at acpi0: C3(10@1000 mwait.1@0x64), C2(10@500 mwait.1@0x58), C1(1000@1 mwait.1), PSS acpicpu1 at acpi0: C3(10@1000 mwait.1@0x64), C2(10@500 mwait.1@0x58), C1(1000@1 mwait.1), PSS acpicpu2 at acpi0: C3(10@1000 mwait.1@0x64), C2(10@500 mwait.1@0x58), C1(1000@1 mwait.1), PSS acpicpu3 at acpi0: C3(10@1000 mwait.1@0x64), C2(10@500 mwait.1@0x58), C1(1000@1 mwait.1), PSS acpipwrres0 at acpi0: ID3C, resource for ISP3 acpipwrres1 at acpi0: CLK0, resource for CAMD acpipwrres2 at acpi0: CLK0, resource for CAM1 acpipwrres3 at acpi0: CLK1, resource for CAM2, CAM3 acpipwrres4 at acpi0: USBC, resource for XHC1 acpipwrres5 at acpi0: FN00, resource for FAN0 acpitz0 at acpi0: critical temperature is 95 degC acpicmos0 at acpi0 acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001 "BCM2E64" at acpi0 not configured "BCM4752" at acpi0 not configured "SMO91D0" at acpi0 not configured "INTCF1C" at acpi0 not configured acpibtn0 at acpi0: SLPB "PNP0C0B" at acpi0 not configured acpivideo0 at acpi0: GFX0 acpivout0 at acpivideo0: DD1F cpu0: Enhanced SpeedStep 1600 MHz: speeds: 1601, 1600, 1520, 1440, 1360, 1280, 1200, 1120, 1040, 960, 880, 800, 720, 640, 560, 480 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Braswell Host" rev 0x35 inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics" rev 0x35 drm0 at inteldrm0 inteldrm0: msi inteldrm0: 1280x720, 32bpp wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) wsdisplay0: screen 1-5 added (std, vt100 emulation) ahci0 at pci0 dev 19 function 0 "Intel Braswell AHCI" rev 0x35: msi, AHCI 1.3.1 ahci0: port 0: 6.0Gb/s ahci0: PHY offline on port 1 scsibus1 at ahci0: 32 targets sd0 at scsibus1 targ 0 lun 0: <ATA, SAMSUNG MZMPC032, CXM1> SCSI3 0/direct fixed t10.ATA_SAMSUNG_MZMPC032HBCD-000L1_S0Y2NEAC517402_ sd0: 30533MB, 512 bytes/sector, 62533296 sectors, thin xhci0 at pci0 dev 20 function 0 "Intel Braswell xHCI" rev 0x35: msi, xHCI 1.0 usb0 at xhci0: USB revision 3.0 uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 "Intel Braswell TXE" rev 0x35 at pci0 dev 26 function 0 not configured azalia0 at pci0 dev 27 function 0 "Intel Braswell HD Audio" rev 0x35: msi azalia0: codecs: Realtek ALC662, Intel/0x2883, using Realtek ALC662 audio0 at azalia0 ppb0 at pci0 dev 28 function 0 "Intel Braswell PCIE" rev 0x35: msi pci1 at ppb0 bus 1 em0 at pci1 dev 0 function 0 "Intel I210" rev 0x03: msi, address 00:e0:67:0e:33:c0 ppb1 at pci0 dev 28 function 1 "Intel Braswell PCIE" rev 0x35: msi pci2 at ppb1 bus 2 em1 at pci2 dev 0 function 0 "Intel I210" rev 0x03: msi, address 00:e0:67:0e:33:c1 ppb2 at pci0 dev 28 function 2 "Intel Braswell PCIE" rev 0x35: msi pci3 at ppb2 bus 3 em2 at pci3 dev 0 function 0 "Intel I210" rev 0x03: msi, address 00:e0:67:0e:33:c2 ppb3 at pci0 dev 28 function 3 "Intel Braswell PCIE" rev 0x35: msi pci4 at ppb3 bus 4 em3 at pci4 dev 0 function 0 "Intel I210" rev 0x03: msi, address 00:e0:67:0e:33:c3 pcib0 at pci0 dev 31 function 0 "Intel Braswell PCU LPC" rev 0x35 ichiic0 at pci0 dev 31 function 3 "Intel Braswell SMBus" rev 0x35: apic 1 int 18 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-12800 SO-DIMM isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pcppi0 at isa0 port 0x61 spkr0 at pcppi0 vmm0 at mainbus0: VMX/EPT (using slow L1TF mitigation) efifb at mainbus0 not configured bwfm0 at uhub0 port 1 configuration 1 interface 0 "Broadcom BCMUSB 802.11 Wireless Adapter" rev 2.10/0.01 addr 2 uhidev0 at uhub0 port 2 configuration 1 interface 0 "BTC USB Keyboard" rev 1.10/1.80 addr 3 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 variable keys, 6 key codes wskbd0 at ukbd0: console keyboard, using wsdisplay0 uhidev1 at uhub0 port 2 configuration 1 interface 1 "BTC USB Keyboard" rev 1.10/1.80 addr 3 uhidev1: iclass 3/0, 2 report ids uhid0 at uhidev1 reportid 1: input=2, output=0, feature=0 uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0 vscsi0 at root scsibus2 at vscsi0: 256 targets softraid0 at root scsibus3 at softraid0: 256 targets root on sd0a (7cfbfd7934233d80.a) swap on sd0b dump on sd0b ps: kernel customization only in console color change(i hate grey-blue default)
