A little more follow-up on this vmd-memory-leak issue.
Comparing the two VMs I have running, I started to stress parts where
these two hosts differ. The testvm hardly does any traffic, while the
undeadly vm sees quite a few visitors on a daily basis, so networking
may be part of the leak.
Running tcpbench against this machine (averaging at ~250Mbit/s)
results in vmd growing by about 80MB to 100MB per minute. Running
tcpbench against the testvm has similar results.
The undeadly VM also has a second disk configured (on slower storage),
but putting load on that didn't significantly change the memory
consumption (above the 'expected' growth that I've been seeing).
The growth during daily(8) runs still confuses me, as that doesn't do
anything network-related...
Paul
On Sat, Jul 20, 2019 at 04:23:27PM +0200, Paul de Weerd wrote:
| Hi all,
|
| I'm running two vmd(8) VMs:
|
| [weerd@despair] $ cat /etc/vm.conf
| vm "undeadly" {
| owner root
| memory 2G
| disk /home/vmm/undeadly.dsk
| disk /storage/vmm/undeadly.dsk
| interface switch "vmmswitch" lladdr "fe:e1:bb:02:6b:bf"
| }
|
| vm "testvm" {
| owner root
| memory 2G
| disk /home/vmm/testvm.dsk
| interface switch "vmmswitch" lladdr "fe:e1:bb:02:6b:be"
| }
|
| switch "vmmswitch" {
| enable
| interface bridge0
| }
|
| Both machines have been up since boot of the host machine:
|
| [weerd@despair] $ vmctl status
| ID PID VCPUS MAXMEM CURMEM TTY OWNER STATE NAME
| 2 23133 1 2.0G 1.1G ttyp1 root running testvm
| 1 42094 1 2.0G 1.5G ttyp0 root running undeadly
| [weerd@despair] $ uptime
| 4:11PM up 43 days, 57 mins, 12 users, load averages: 0.02, 0.07, 0.07
| [weerd@despair] $ ssh undeadly uptime
| 4:11PM up 43 days, 57 mins, 2 users, load averages: 0.28, 0.12, 0.10
| [weerd@despair] $ ssh testvm uptime
| 4:11PM up 43 days, 57 mins, 0 users, load averages: 0.00, 0.00, 0.00
|
| However, the undeadly VM consumes signficantly more memory that the
| other VM:
|
| [weerd@despair] $ ps wwwaux | grep -e vm[d] -e [P]ID
| USER PID %CPU %MEM VSZ RSS TT STAT STARTED TIME COMMAND
| _vmd 42094 3.7 57.9 28769236 19398792 ?? Ip 7Jun19 4741:37.66 vmd:
undeadly (vmd)
| _vmd 4567 0.0 0.0 1384 1384 ?? Isp 7Jun19 0:00.01 vmd: vmm
(vmd)
| root 84392 0.0 0.0 1564 1436 ?? Isp 7Jun19 0:00.02
/usr/sbin/vmd
| _vmd 55269 0.0 0.0 1304 1468 ?? Isp 7Jun19 0:00.01 vmd:
control (vmd)
| root 51181 0.0 0.0 1236 928 ?? Is 7Jun19 0:00.01 vmd: priv
(vmd)
| _vmd 23133 0.0 0.2 2100100 70272 ?? Ip 7Jun19 1886:16.18 vmd:
testvm (vmd)
|
| All systems run snaps from around the same time:
|
| [weerd@despair] $ sysctl kern.version
| kern.version=OpenBSD 6.5-current (GENERIC.MP) #6: Tue Jun 4 15:05:10 MDT 2019
| dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
|
| [weerd@despair] $ ssh undeadly sysctl kern.version
| kern.version=OpenBSD 6.5-current (GENERIC) #7: Fri Jun 7 00:45:34 MDT 2019
| dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC
|
| [weerd@despair] $ ssh testvm sysctl kern.version
| kern.version=OpenBSD 6.5-current (GENERIC) #6: Tue Jun 4 14:57:43 MDT 2019
| dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC
|
| So it looks like there's a memory leak, either only for busy VMs or it
| shows more for busier VMs. Has anyone seen anything similar on their
| vmm VMs?
|
| I'll reboot the undeadly VM for now, as other processes are getting
| killed for out of memory reasons (bgpd, in my case; see end of below
| dmesg of host machine 'despair').
|
| Paul
|
| --- despair dmesg ----------------------------------------------------
| OpenBSD 6.5-current (GENERIC.MP) #6: Tue Jun 4 15:05:10 MDT 2019
| dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
| real mem = 34332733440 (32742MB)
| avail mem = 33282105344 (31740MB)
| mpath0 at root
| scsibus0 at mpath0: 256 targets
| mainbus0 at root
| bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe66d0 (57 entries)
| bios0: vendor Dell Inc. version "1.2.3" date 07/21/2011
| bios0: Dell Inc. PowerEdge R210 II
| acpi0 at bios0: rev 2
| acpi0: sleep states S0 S4 S5
| acpi0: tables DSDT FACP SPMI ASF! HPET APIC MCFG BOOT SSDT ASPT SSDT SSDT
SPCR DMAR HEST ERST BERT EINJ
| acpi0: wakeup devices P0P1(S4) GLAN(S0) EHC1(S4) EHC2(S4) PXSX(S4) RP01(S5)
PXSX(S4) RP02(S5) PXSX(S4) RP03(S5) PXSX(S4) RP04(S5) PXSX(S4) RP05(S5)
PXSX(S4) RP06(S5) [...]
| acpitimer0 at acpi0: 3579545 Hz, 24 bits
| acpihpet0 at acpi0: 14318179 Hz
| acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
| cpu0 at mainbus0: apid 0 (boot processor)
| cpu0: Intel(R) Xeon(R) CPU E31260L @ 2.40GHz, 2400.39 MHz, 06-2a-07
| cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
| cpu0: 256KB 64b/line 8-way L2 cache
| cpu0: smt 0, core 0, package 0
| mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
| cpu0: apic clock running at 100MHz
| cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE
| cpu1 at mainbus0: apid 1 (application processor)
| cpu1: Intel(R) Xeon(R) CPU E31260L @ 2.40GHz, 2400.02 MHz, 06-2a-07
| cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
| cpu1: 256KB 64b/line 8-way L2 cache
| cpu1: smt 1, core 0, package 0
| cpu2 at mainbus0: apid 2 (application processor)
| cpu2: Intel(R) Xeon(R) CPU E31260L @ 2.40GHz, 2400.02 MHz, 06-2a-07
| cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
| cpu2: 256KB 64b/line 8-way L2 cache
| cpu2: smt 0, core 1, package 0
| cpu3 at mainbus0: apid 3 (application processor)
| cpu3: Intel(R) Xeon(R) CPU E31260L @ 2.40GHz, 2400.02 MHz, 06-2a-07
| cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
| cpu3: 256KB 64b/line 8-way L2 cache
| cpu3: smt 1, core 1, package 0
| cpu4 at mainbus0: apid 4 (application processor)
| cpu4: Intel(R) Xeon(R) CPU E31260L @ 2.40GHz, 2400.02 MHz, 06-2a-07
| cpu4:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
| cpu4: 256KB 64b/line 8-way L2 cache
| cpu4: smt 0, core 2, package 0
| cpu5 at mainbus0: apid 5 (application processor)
| cpu5: Intel(R) Xeon(R) CPU E31260L @ 2.40GHz, 2400.02 MHz, 06-2a-07
| cpu5:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
| cpu5: 256KB 64b/line 8-way L2 cache
| cpu5: smt 1, core 2, package 0
| cpu6 at mainbus0: apid 6 (application processor)
| cpu6: Intel(R) Xeon(R) CPU E31260L @ 2.40GHz, 2400.02 MHz, 06-2a-07
| cpu6:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
| cpu6: 256KB 64b/line 8-way L2 cache
| cpu6: smt 0, core 3, package 0
| cpu7 at mainbus0: apid 7 (application processor)
| cpu7: Intel(R) Xeon(R) CPU E31260L @ 2.40GHz, 2400.02 MHz, 06-2a-07
| cpu7:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
| cpu7: 256KB 64b/line 8-way L2 cache
| cpu7: smt 1, core 3, package 0
| ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
| acpimcfg0 at acpi0
| acpimcfg0: addr 0xe0000000, bus 0-255
| acpiprt0 at acpi0: bus 0 (PCI0)
| acpiprt1 at acpi0: bus 2 (P0P1)
| acpiprt2 at acpi0: bus 1 (RP01)
| acpiprt3 at acpi0: bus -1 (RP02)
| acpiprt4 at acpi0: bus -1 (RP03)
| acpiprt5 at acpi0: bus -1 (RP04)
| acpiprt6 at acpi0: bus -1 (RP05)
| acpiprt7 at acpi0: bus -1 (RP06)
| acpiprt8 at acpi0: bus -1 (RP07)
| acpiprt9 at acpi0: bus -1 (RP08)
| acpiprt10 at acpi0: bus -1 (PEG0)
| acpiprt11 at acpi0: bus -1 (PEG1)
| acpiprt12 at acpi0: bus -1 (PEG2)
| acpiprt13 at acpi0: bus -1 (PEG3)
| acpicpu0 at acpi0: C3(350@104 mwait.1@0x20), C2(500@80 mwait.1@0x10),
C1(1000@1 mwait.1), PSS
| acpicpu1 at acpi0: C3(350@104 mwait.1@0x20), C2(500@80 mwait.1@0x10),
C1(1000@1 mwait.1), PSS
| acpicpu2 at acpi0: C3(350@104 mwait.1@0x20), C2(500@80 mwait.1@0x10),
C1(1000@1 mwait.1), PSS
| acpicpu3 at acpi0: C3(350@104 mwait.1@0x20), C2(500@80 mwait.1@0x10),
C1(1000@1 mwait.1), PSS
| acpicpu4 at acpi0: C3(350@104 mwait.1@0x20), C2(500@80 mwait.1@0x10),
C1(1000@1 mwait.1), PSS
| acpicpu5 at acpi0: C3(350@104 mwait.1@0x20), C2(500@80 mwait.1@0x10),
C1(1000@1 mwait.1), PSS
| acpicpu6 at acpi0: C3(350@104 mwait.1@0x20), C2(500@80 mwait.1@0x10),
C1(1000@1 mwait.1), PSS
| acpicpu7 at acpi0: C3(350@104 mwait.1@0x20), C2(500@80 mwait.1@0x10),
C1(1000@1 mwait.1), PSS
| acpipwrres0 at acpi0: FN00, resource for FAN0
| acpipwrres1 at acpi0: FN01, resource for FAN1
| acpipwrres2 at acpi0: FN02, resource for FAN2
| acpipwrres3 at acpi0: FN03, resource for FAN3
| acpipwrres4 at acpi0: FN04, resource for FAN4
| acpitz0 at acpi0: critical temperature is 100 degC
| acpipci0 at acpi0 PCI0: 0x00000010 0x00000011 0x00000000
| "IPI0001" at acpi0 not configured
| acpicmos0 at acpi0
| "PNP0A05" at acpi0 not configured
| "PNP0A05" at acpi0 not configured
| "PNP0C0B" at acpi0 not configured
| "PNP0C0B" at acpi0 not configured
| "PNP0C0B" at acpi0 not configured
| "PNP0C0B" at acpi0 not configured
| "PNP0C0B" at acpi0 not configured
| ipmi at mainbus0 not configured
| cpu0: using VERW MDS workaround (except on vmm entry)
| cpu0: Enhanced SpeedStep 2400 MHz: speeds: 2401, 2400, 2300, 2200, 2100,
2000, 1900, 1800, 1700, 1600 MHz
| pci0 at mainbus0 bus 0
| pchb0 at pci0 dev 0 function 0 "Intel Xeon E3-1200 Host" rev 0x09
| ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x04: apic 0 int 16
| usb0 at ehci0: USB revision 2.0
| uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
| ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb4: msi
| pci1 at ppb0 bus 1
| bnx0 at pci1 dev 0 function 0 "Broadcom BCM5716" rev 0x20: apic 0 int 16
| bnx1 at pci1 dev 0 function 1 "Broadcom BCM5716" rev 0x20: apic 0 int 17
| ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x04: apic 0 int 23
| usb1 at ehci1: USB revision 2.0
| uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
| ppb1 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa4
| pci2 at ppb1 bus 2
| 2:3:0: mem address conflict 0xffff0000/0x10000
| vga1 at pci2 dev 3 function 0 "Matrox MGA G200eW" rev 0x0a
| wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
| wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
| pcib0 at pci0 dev 31 function 0 "Intel C202 LPC" rev 0x04
| ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x04: msi, AHCI 1.3
| ahci0: port 0: 3.0Gb/s
| ahci0: port 1: 3.0Gb/s
| ahci0: port 4: 1.5Gb/s
| scsibus1 at ahci0: 32 targets
| sd0 at scsibus1 targ 0 lun 0: <ATA, INTEL SSDSC2BW48, DC32> SCSI3 0/direct
fixed naa.55cd2e414c807f33
| sd0: 457862MB, 512 bytes/sector, 937703088 sectors, thin
| sd1 at scsibus1 targ 1 lun 0: <ATA, WDC WD60EFRX-68L, 82.0> SCSI3 0/direct
fixed naa.50014ee20dd29e68
| sd1: 5723166MB, 512 bytes/sector, 11721045168 sectors
| cd0 at scsibus1 targ 4 lun 0: <TSSTcorp, DVD+-RW TS-L633J, D150> ATAPI
5/cdrom removable
| ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x04: apic 0 int
19
| iic0 at ichiic0
| sdtemp0 at iic0 addr 0x18: mcp98243
| sdtemp1 at iic0 addr 0x19: mcp98243
| sdtemp2 at iic0 addr 0x1a: mcp98243
| sdtemp3 at iic0 addr 0x1b: mcp98243
| spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM ECC PC3-12800 with thermal sensor
| spdmem1 at iic0 addr 0x51: 8GB DDR3 SDRAM ECC PC3-12800 with thermal sensor
| spdmem2 at iic0 addr 0x52: 8GB DDR3 SDRAM ECC PC3-12800 with thermal sensor
| spdmem3 at iic0 addr 0x53: 8GB DDR3 SDRAM ECC PC3-12800 with thermal sensor
| isa0 at pcib0
| isadma0 at isa0
| com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
| com0: console
| com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
| pckbc0 at isa0 port 0x60/5 irq 1 irq 12
| pcppi0 at isa0 port 0x61
| spkr0 at pcppi0
| vmm0 at mainbus0: VMX/EPT
| uhub2 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
rev 2.00/0.00 addr 2
| uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
rev 2.00/0.00 addr 2
| uhidev0 at uhub3 port 1 configuration 1 interface 0 "RDing TEMPERHUM1V1.2"
rev 2.00/0.01 addr 3
| uhidev0: iclass 3/1, 1 report id
| ukbd0 at uhidev0 reportid 1: 8 variable keys, 5 key codes
| wskbd0 at ukbd0: console keyboard, using wsdisplay0
| uhidev1 at uhub3 port 1 configuration 1 interface 1 "RDing TEMPERHUM1V1.2"
rev 2.00/0.01 addr 3
| uhidev1: iclass 3/1
| ugold0 at uhidev1
| uhub4 at uhub3 port 5 configuration 1 interface 0 "Standard Microsystems
product 0x2514" rev 2.00/0.00 addr 4
| vscsi0 at root
| scsibus2 at vscsi0: 256 targets
| softraid0 at root
| scsibus3 at softraid0: 256 targets
| sd2 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed
| sd2: 409602MB, 512 bytes/sector, 838865577 sectors
| root on sd2a (5a5905f3a7206f17.a) swap on sd2b dump on sd2b
| bnx0: address bc:30:5b:e8:d6:48
| brgphy0 at bnx0 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
| bnx1: address bc:30:5b:e8:d6:49
| brgphy1 at bnx1 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
| ugold0: 2 sensors type si7006 (temperature and humidity)
| sd3 at scsibus3 targ 2 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed
| sd3: 5231654MB, 512 bytes/sector, 10714427745 sectors
| UVM: pid 36202 (bgpd), uid 75 killed: out of swap
| ----------------------------------------------------------------------
|
| --- undeadly dmesg ---------------------------------------------------
| OpenBSD 6.5-current (GENERIC) #7: Fri Jun 7 00:45:34 MDT 2019
| dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC
| real mem = 2130690048 (2031MB)
| avail mem = 2056167424 (1960MB)
| mpath0 at root
| scsibus0 at mpath0: 256 targets
| mainbus0 at root
| bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf15e0 (10 entries)
| bios0: vendor SeaBIOS version "1.11.0p1-OpenBSD-vmm" date 01/01/2011
| bios0: OpenBSD VMM
| acpi at bios0 not configured
| cpu0 at mainbus0: (uniprocessor)
| cpu0: Intel(R) Xeon(R) CPU E31260L @ 2.40GHz, 2401.44 MHz, 06-2a-07
| cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,CX8,SEP,PGE,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,PCLMUL,SSSE3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,HV,NXE,LONG,LAHF,ITSC,MD_CLEAR,MELTDOWN
| cpu0: 256KB 64b/line 8-way L2 cache
| cpu0: smt 0, core 0, package 0
| cpu0: using VERW MDS workaround
| pvbus0 at mainbus0: OpenBSD
| pvclock0 at pvbus0
| pci0 at mainbus0 bus 0
| pchb0 at pci0 dev 0 function 0 "OpenBSD VMM Host" rev 0x00
| virtio0 at pci0 dev 1 function 0 "Qumranet Virtio RNG" rev 0x00
| viornd0 at virtio0
| virtio0: irq 3
| virtio1 at pci0 dev 2 function 0 "Qumranet Virtio Network" rev 0x00
| vio0 at virtio1: address fe:e1:bb:02:6b:bf
| virtio1: irq 5
| virtio2 at pci0 dev 3 function 0 "Qumranet Virtio Storage" rev 0x00
| vioblk0 at virtio2
| scsibus1 at vioblk0: 2 targets
| sd0 at scsibus1 targ 0 lun 0: <VirtIO, Block Device, > SCSI3 0/direct fixed
| sd0: 6144MB, 512 bytes/sector, 12582912 sectors
| virtio2: irq 6
| virtio3 at pci0 dev 4 function 0 "Qumranet Virtio Storage" rev 0x00
| vioblk1 at virtio3
| scsibus2 at vioblk1: 2 targets
| sd1 at scsibus2 targ 0 lun 0: <VirtIO, Block Device, > SCSI3 0/direct fixed
| sd1: 51200MB, 512 bytes/sector, 104857600 sectors
| virtio3: irq 7
| virtio4 at pci0 dev 5 function 0 "OpenBSD VMM Control" rev 0x00
| vmmci0 at virtio4
| virtio4: irq 9
| isa0 at mainbus0
| isadma0 at isa0
| com0 at isa0 port 0x3f8/8 irq 4: ns8250, no fifo
| com0: console
| vscsi0 at root
| scsibus3 at vscsi0: 256 targets
| softraid0 at root
| scsibus4 at softraid0: 256 targets
| root on sd0a (112d38627522c4b4.a) swap on sd0b dump on sd0b
| ----------------------------------------------------------------------
|
| --- testvm dmesg -----------------------------------------------------
| OpenBSD 6.5-current (GENERIC) #6: Tue Jun 4 14:57:43 MDT 2019
| dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC
| real mem = 2130698240 (2031MB)
| avail mem = 2056175616 (1960MB)
| mpath0 at root
| scsibus0 at mpath0: 256 targets
| mainbus0 at root
| bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf15e0 (10 entries)
| bios0: vendor SeaBIOS version "1.11.0p1-OpenBSD-vmm" date 01/01/2011
| bios0: OpenBSD VMM
| acpi at bios0 not configured
| cpu0 at mainbus0: (uniprocessor)
| cpu0: Intel(R) Xeon(R) CPU E31260L @ 2.40GHz, 2401.28 MHz, 06-2a-07
| cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,CX8,SEP,PGE,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,PCLMUL,SSSE3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,HV,NXE,LONG,LAHF,ITSC,MD_CLEAR,MELTDOWN
| cpu0: 256KB 64b/line 8-way L2 cache
| cpu0: smt 0, core 0, package 0
| cpu0: using VERW MDS workaround
| pvbus0 at mainbus0: OpenBSD
| pvclock0 at pvbus0
| pci0 at mainbus0 bus 0
| pchb0 at pci0 dev 0 function 0 "OpenBSD VMM Host" rev 0x00
| virtio0 at pci0 dev 1 function 0 "Qumranet Virtio RNG" rev 0x00
| viornd0 at virtio0
| virtio0: irq 3
| virtio1 at pci0 dev 2 function 0 "Qumranet Virtio Network" rev 0x00
| vio0 at virtio1: address fe:e1:bb:02:6b:be
| virtio1: irq 5
| virtio2 at pci0 dev 3 function 0 "Qumranet Virtio Storage" rev 0x00
| vioblk0 at virtio2
| scsibus1 at vioblk0: 2 targets
| sd0 at scsibus1 targ 0 lun 0: <VirtIO, Block Device, > SCSI3 0/direct fixed
| sd0: 6144MB, 512 bytes/sector, 12582912 sectors
| virtio2: irq 6
| virtio3 at pci0 dev 4 function 0 "OpenBSD VMM Control" rev 0x00
| vmmci0 at virtio3
| virtio3: irq 7
| isa0 at mainbus0
| isadma0 at isa0
| com0 at isa0 port 0x3f8/8 irq 4: ns8250, no fifo
| com0: console
| vscsi0 at root
| scsibus2 at vscsi0: 256 targets
| softraid0 at root
| scsibus3 at softraid0: 256 targets
| root on sd0a (10dc99cfac23b3f1.a) swap on sd0b dump on sd0b
| ----------------------------------------------------------------------
|
| --
| >++++++++[<++++++++++>-]<+++++++.>+++[<------>-]<.>+++[<+
| +++++++++++>-]<.>++[<------------>-]<+.--------------.[-]
| http://www.weirdnet.nl/
|
--
>++++++++[<++++++++++>-]<+++++++.>+++[<------>-]<.>+++[<+
+++++++++++>-]<.>++[<------------>-]<+.--------------.[-]
http://www.weirdnet.nl/
