I have an Acer Aspire A315 laptop that freezes every once in a while. I
think it is GPU related, but have not been able to get any logs. In
addition a while ago (roughly when 6.7 came out) I tried to upgrade
from 6.6 to 6.7 and the laptop would turn off just after getting the
log in prompt. Again no logs.
One thought was in my xorg.conf file to change the driver from AMDGPU
to vesa. However that is producing an error. Log and dmesg below.
Any thoughts on how to proceed?
Thnaks.
Jon
xorg.conf:
Section "Device"
Identifier "graphicsdriver"
#Driver "AMDGPU"
#Option "TearFree" "true"
Driver "vesa"
EndSection
Xorg.0.log:
[124569.415] (--) checkDevMem: using aperture driver /dev/xf86
[124569.425] (--) Using wscons driver on /dev/ttyC4
[124569.446]
X.Org X Server 1.20.5
X Protocol Version 11, Revision 0
[124569.446] Build Operating System: OpenBSD 6.6 amd64
[124569.446] Current Operating System: OpenBSD laptop.jonjfineman.me
6.6 GENERIC.MP#3 amd64 [124569.447] Build Date: 30 July 2020 11:25:30AM
[124569.447]
[124569.447] Current version of pixman: 0.38.4
[124569.447] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[124569.447] Markers: (--) probed, (**) from config file, (==) default
setting, (++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[124569.447] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Aug 9
05:48:55 2020 [124569.447] (==) Using config file: "/etc/X11/xorg.conf"
[124569.447] (==) Using system config directory
"/usr/X11R6/share/X11/xorg.conf.d" [124569.447] (==) No Layout section.
Using the first Screen section. [124569.447] (==) No screen section
available. Using defaults. [124569.447] (**) |-->Screen "Default Screen
Section" (0) [124569.447] (**) | |-->Monitor "<default monitor>"
[124569.448] (==) No device specified for screen "Default Screen
Section". Using the first device section listed.
[124569.448] (**) | |-->Device "graphicsdriver"
[124569.448] (==) No monitor specified for screen "Default Screen
Section". Using a default monitor configuration.
[124569.448] (==) Automatically adding devices
[124569.448] (==) Automatically enabling devices
[124569.448] (==) Not automatically adding GPU devices
[124569.448] (==) Max clients allowed: 256, resource mask: 0x1fffff
[124569.448] (==) FontPath set to:
/usr/X11R6/lib/X11/fonts/misc/,
/usr/X11R6/lib/X11/fonts/TTF/,
/usr/X11R6/lib/X11/fonts/OTF/,
/usr/X11R6/lib/X11/fonts/Type1/,
/usr/X11R6/lib/X11/fonts/100dpi/,
/usr/X11R6/lib/X11/fonts/75dpi/
[124569.448] (==) ModulePath set to "/usr/X11R6/lib/modules"
[124569.448] (II) The server relies on wscons to provide the list of
input devices. If no devices become available, reconfigure wscons or
disable AutoAddDevices. [124569.448] (II) Loader magic: 0xc3982ca3000
[124569.448] (II) Module ABI versions:
[124569.448] X.Org ANSI C Emulation: 0.4
[124569.448] X.Org Video Driver: 24.0
[124569.448] X.Org XInput driver : 24.1
[124569.448] X.Org Server Extension : 10.0
[124569.448] (--) PCI:*(0@0:1:0) 1002:98e4:1025:1192 rev 218, Mem @
0xe0000000/268435456, 0xf0000000/8388608, 0xf0d00000/262144, I/O @
0x00003000/256, BIOS @ 0x????????/131072 [124569.448] (II) LoadModule:
"glx" [124569.449] (II) Loading
/usr/X11R6/lib/modules/extensions/libglx.so [124569.451] (II) Module
glx: vendor="X.Org Foundation" [124569.451] compiled for
1.20.5, module version = 1.0.0 [124569.451] ABI class: X.Org
Server Extension, version 10.0 [124569.451] (II) LoadModule: "vesa"
[124569.452] (II) Loading /usr/X11R6/lib/modules/drivers/vesa_drv.so
[124569.452] (II) Module vesa: vendor="X.Org Foundation" [124569.452]
compiled for 1.20.5, module version = 2.3.4 [124569.452]
Module class: X.Org Video Driver [124569.452] ABI
class: X.Org Video Driver, version 24.0 [124569.452] (II) VESA: driver
for VESA chipsets: vesa [124569.452] (II) Loading sub module "vbe"
[124569.452] (II) LoadModule: "vbe"
[124569.453] (II) Loading /usr/X11R6/lib/modules/libvbe.so
[124569.453] (II) Module vbe: vendor="X.Org Foundation"
[124569.453] compiled for 1.20.5, module version = 1.1.0
[124569.453] ABI class: X.Org Video Driver, version 24.0
[124569.453] (II) Loading sub module "int10"
[124569.453] (II) LoadModule: "int10"
[124569.455] (II) Loading /usr/X11R6/lib/modules/libint10.so
[124569.455] (II) Module int10: vendor="X.Org Foundation"
[124569.455] compiled for 1.20.5, module version = 1.0.0
[124569.455] ABI class: X.Org Video Driver, version 24.0
[124569.455] (II) VESA(0): initializing int10
[124569.455] (EE) VESA(0): Cannot read int vect
[124569.455] (II) UnloadModule: "vesa"
[124569.455] (II) UnloadSubModule: "int10"
[124569.455] (II) Unloading int10
[124569.455] (II) UnloadSubModule: "vbe"
[124569.455] (II) Unloading vbe
[124569.455] (EE) Screen(s) found, but none have a usable configuration.
[124569.455] (EE)
Fatal server error:
[124569.455] (EE) no screens found(EE)
[124569.455] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[124569.455] (EE) Please also check the log file at
"/var/log/Xorg.0.log" for additional information. [124569.455] (EE)
[124569.455] (EE) Server terminated with error (1). Closing log file.
DMESG:
OpenBSD 6.6 (GENERIC.MP) #3: Mon Jul 20 23:21:24 MDT 2020
t...@syspatch-66-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 5978714112 (5701MB)
avail mem = 5784797184 (5516MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xdf266000 (27 entries)
bios0: vendor Insyde Corp. version "V1.00" date 03/20/2017
bios0: Acer Aspire A315-21
acpi0 at bios0: ACPI 5.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP MSDM BOOT HPET MCFG WDAT UEFI SSDT IVRS SSDT
SSDT SSDT UEFI SPCR SSDT CRAT TPM2 FPDT ASF! WDRT VFCT SSDT APIC SSDT
BGRT acpi0: wakeup devices GPP1(S4) GPP4(S4) GFX0(S4) GFX1(S4) GFX2(S4)
GFX3(S4) GFX4(S4) EHC1(S3) XHC0(S3) acpitimer0 at acpi0: 3579545 Hz, 32
bits acpihpet0 at acpi0: 14318180 Hz acpimcfg0 at acpi0
acpimcfg0: addr 0xf8000000, bus 0-63
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 16 (boot processor)
cpu0: AMD A9-9420 RADEON R5, 5 COMPUTE CORES 2C+3G, 2994.79 MHz,
15-70-00 cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,RDRAND,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NODEID,TBM,CPCTR,DBKP,PERFTSC,MWAITX,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,XSAVEOPT
cpu0: 96KB 64b/line 3-way I-cache, 32KB 64b/line 8-way D-cache, 1MB
64b/line 16-way L2 cache cpu0: ITLB 48 4KB entries fully associative,
24 4MB entries fully associative cpu0: DTLB 64 4KB entries fully
associative, 64 4MB entries fully associative cpu0: smt 0, core 0,
package 0 mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz cpu0: mwait min=64, max=64, IBE
cpu1 at mainbus0: apid 17 (application processor)
cpu1: AMD A9-9420 RADEON R5, 5 COMPUTE CORES 2C+3G, 2994.40 MHz,
15-70-00 cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,RDRAND,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NODEID,TBM,CPCTR,DBKP,PERFTSC,MWAITX,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,XSAVEOPT
cpu1: 96KB 64b/line 3-way I-cache, 32KB 64b/line 8-way D-cache, 1MB
64b/line 16-way L2 cache cpu1: ITLB 48 4KB entries fully associative,
24 4MB entries fully associative cpu1: DTLB 64 4KB entries fully
associative, 64 4MB entries fully associative cpu1: smt 1, core 0,
package 0 ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 21, 24
pins, remapped ioapic1 at mainbus0: apid 5 pa 0xfec01000, version 21,
32 pins, remapped acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0:
bus 1 (GPP0) acpiprt2 at acpi0: bus 2 (GPP1)
acpiprt3 at acpi0: bus 3 (GPP2)
acpiprt4 at acpi0: bus -1 (GPP3)
acpiprt5 at acpi0: bus -1 (GPP4)
acpiprt6 at acpi0: bus -1 (GFX0)
acpiprt7 at acpi0: bus -1 (GFX1)
acpiprt8 at acpi0: bus -1 (GFX2)
acpiprt9 at acpi0: bus -1 (GFX3)
acpiprt10 at acpi0: bus -1 (GFX4)
acpiec0 at acpi0
acpicpu0 at acpi0: C2(0@400 io@0x414), C1(@1 halt!), PSS
acpicpu1 at acpi0: C2(0@400 io@0x414), C1(@1 halt!), PSS
acpipwrres0 at acpi0: WRST
acpipwrres1 at acpi0: P0U3, resource for XHC0
acpipwrres2 at acpi0: P3U3, resource for XHC0
acpipwrres3 at acpi0: P0U2, resource for EHC1
acpipwrres4 at acpi0: P3U2, resource for EHC1
acpipwrres5 at acpi0: P0SD, resource for SDIO
acpipwrres6 at acpi0: P3SD, resource for SDIO
acpipwrres7 at acpi0: P0ST, resource for SATA
acpipwrres8 at acpi0: P3ST, resource for SATA
acpitz0 at acpi0: critical temperature is 100 degC
acpibtn0 at acpi0: PWRB
acpipci0 at acpi0 PCI0: 0x00000010 0x00000011 0x00000000
acpicmos0 at acpi0
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpibtn1 at acpi0: SLPB
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT1 model "AP16M5J" serial 3742 type LION oem
"PANASONIC" acpibtn2 at acpi0: LID_
"AMD0030" at acpi0 not configured
"AMD0020" at acpi0 not configured
"AMD0020" at acpi0 not configured
"AMD0010" at acpi0 not configured
"SYNA7DB5" at acpi0 not configured
"AMD0010" at acpi0 not configured
"MSFT0101" at acpi0 not configured
acpivideo0 at acpi0: VGA_
acpivideo1 at acpi0: VGA_
acpivideo2 at acpi0: VGA_
cpu0: 2994 MHz: speeds: 3000 2700 2400 2100 1800 1400 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "AMD AMD64 15h Root Complex" rev 0x00
"AMD AMD64 15h IOMMU" rev 0x00 at pci0 dev 0 function 2 not configured
amdgpu0 at pci0 dev 1 function 0 "ATI Stoney Ridge" rev 0xda
drm0 at amdgpu0
amdgpu0: msi
azalia0 at pci0 dev 1 function 1 vendor "ATI", unknown product 0x15b3
rev 0x00: msi azalia0: no supported codecs
pchb1 at pci0 dev 2 function 0 "AMD AMD64 15h Host" rev 0x00
ppb0 at pci0 dev 2 function 1 "AMD AMD64 15h PCIE" rev 0x00: msi
pci1 at ppb0 bus 1
ppb1 at pci0 dev 2 function 2 "AMD AMD64 15h PCIE" rev 0x00: msi
pci2 at ppb1 bus 2
rtsx0 at pci2 dev 0 function 0 "Realtek RTL8411B Card Reader" rev 0x01:
msi sdmmc0 at rtsx0: 4-bit, dma
re0 at pci2 dev 0 function 1 "Realtek 8168" rev 0x12: RTL8411B
(0x5c80), msi, address a8:1e:84:82:c3:0b rgephy0 at re0 phy 7: RTL8251
PHY, rev. 0 ppb2 at pci0 dev 2 function 3 "AMD AMD64 15h PCIE" rev
0x00: msi pci3 at ppb2 bus 3
vendor "Atheros", unknown product 0x0042 (class network subclass
miscellaneous, rev 0x31) at pci3 dev 0 function 0 not configured pchb2
at pci0 dev 3 function 0 "AMD AMD64 15h Host" rev 0x00 "AMD AMD64 15h
PSP 2.0" rev 0x00 at pci0 dev 8 function 0 not configured pchb3 at pci0
dev 9 function 0 "AMD AMD64 15h Host" rev 0x00 azalia1 at pci0 dev 9
function 2 "AMD AMD64 15h HD Audio" rev 0x00: apic 5 int 22 azalia1:
codecs: Realtek/0x0255 audio0 at azalia1
xhci0 at pci0 dev 16 function 0 "AMD FCH xHCI" rev 0x20: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "AMD xHCI root hub" rev
3.00/1.00 addr 1 ahci0 at pci0 dev 17 function 0 "AMD FCH AHCI" rev
0x4b: apic 4 int 19, AHCI 1.3 ahci0: port 0: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, Samsung SSD 860, RVT0>
naa.5002538e0978673a sd0: 476940MB, 512 bytes/sector, 976773168
sectors, thin ehci0 at pci0 dev 18 function 0 "AMD FCH USB2" rev 0x49:
apic 4 int 18 usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "AMD EHCI root hub" rev
2.00/1.00 addr 1 "AMD FCH SMBus" rev 0x4b at pci0 dev 20 function 0 not
configured pcib0 at pci0 dev 20 function 3 "AMD FCH LPC" rev 0x11
pchb4 at pci0 dev 24 function 0 vendor "AMD", unknown product 0x15b0
rev 0x00 pchb5 at pci0 dev 24 function 1 vendor "AMD", unknown product
0x15b1 rev 0x00 pchb6 at pci0 dev 24 function 2 vendor "AMD", unknown
product 0x15b2 rev 0x00 pchb7 at pci0 dev 24 function 3 vendor "AMD",
unknown product 0x15b3 rev 0x00 pchb8 at pci0 dev 24 function 4 vendor
"AMD", unknown product 0x15b4 rev 0x00 pchb9 at pci0 dev 24 function 5
vendor "AMD", unknown product 0x15b5 rev 0x00 isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pms0: Synaptics clickpad, firmware 8.2, 0x1e2a1 0x840300
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: SVM/RVI
efifb at mainbus0 not configured
uhub2 at uhub1 port 1 configuration 1 interface 0 "Advanced Micro
Devices product 0x7900" rev 2.00/0.18 addr 2 urtwn0 at uhub2 port 1
configuration 1 interface 0 "Realtek 802.11n WLAN Adapter" rev
2.00/2.00 addr 3 urtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R, address
08:be:ac:07:f3:c5 ugen0 at uhub2 port 3 "Lite-On Technology product
0x3015" rev 2.01/0.01 addr 4 uvideo0 at uhub2 port 4 configuration 1
interface 0 "KSVGA0500171401441LM06 VGA WebCam" rev 2.00/0.06 addr 5
video0 at uvideo0 vscsi0 at root scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (6c5e0f8fbd0b9634.a) swap on sd0b dump on sd0b
initializing kernel modesetting (STONEY 0x1002:0x98E4 0x1025:0x1192
0xDA). amdgpu_irq_add_domain: stub
amdgpu0: 1366x768, 32bpp
wsdisplay0 at amdgpu0 mux 1: console (std, vt100 emulation), using
wskbd0 wsdisplay0: screen 1-5 added (std, vt100 emulation)
uhidev0 at uhub0 port 7 configuration 1 interface 0 "PixArt USB Optical
Mouse" rev 2.00/1.00 addr 2 uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
wsmouse1 detached
ums0 detached
uhidev0 detached
uhidev0 at uhub0 port 7 configuration 1 interface 0 "PixArt USB Optical
Mouse" rev 2.00/1.00 addr 2 uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
wsmouse1 detached
ums0 detached
uhidev0 detached
uhidev0 at uhub0 port 7 configuration 1 interface 0 "PixArt USB Optical
Mouse" rev 2.00/1.00 addr 2 uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
