Hey folks,
i am trying to set my desktop serial console in order to be able to
have serial access to my soekris box.
I wonder how should i configure my local (desktop box) serial to do
it? I known, the FAQ does not explain what i need:
Here is what i am trying :
# stty -f /dev/tty00 rows 24
# stty -a -f /dev/tty00
speed 9600 baud; 0 rows; 0 columns;
lflags: icanon isig iexten echo echoe -echok echoke -echonl echoctl
-echoprt -altwerase -noflsh -tostop -flusho -pendin -nokerninfo
-extproc -xcase
iflags: -istrip icrnl -inlcr -igncr -iuclc ixon -ixoff ixany imaxbel
-ignbrk brkint -inpck -ignpar -parmrk
oflags: opost onlcr -ocrnl -onocr -onlret -olcuc oxtabs -onoeot
cflags: cread cs8 -parenb -parodd hupcl -clocal -cstopb -crtscts -mdmbuf
cchars: discard = ^O; dsusp = ^Y; eof = ^D; eol = <undef>;
eol2 = <undef>; erase = ^?; intr = ^C; kill = ^U; lnext = ^V;
min = 1; quit = ^\; reprint = ^R; start = ^Q; status = <undef>;
stop = ^S; susp = ^Z; time = 0; werase = ^W;
#
As you can see, the number of rows did not changed.
Another questions: do i need to have the same speed on both sides? Thanks.
My dmesg is attached.
[demime 1.01d removed an attachment of type application/octet-stream which had
a name of dmesg]
