Hi, I have a Intel NUC (NUC7CJYHN) which I installed OpenBSD 7.1 on it. Installation went fine and most of the things work out of the box.
There is a SD card slot on the side that does not seem effective, the only message I get is: sdmmc0: can't enable card There is no kernel activity if I plug a SD card at runtime nor booting with an already entered card either. The audio device seems detected but there is no way to get any sound out of the internal speaker nor the audio jack. I guess this is due to the "no supported codecs" as shown here: azalia0 at pci0 dev 14 function 0 "Intel Gemini Lake HD Audio" rev 0x06: msi azalia0: no supported codecs Here's the whole dmesg (see below for a AZALIA_DEBUG kernel enabled): OpenBSD 7.1 (GENERIC.MP) #3: Sun May 15 10:27:01 MDT 2022 r...@syspatch-71-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENER IC.MP real mem = 8122888192 (7746MB) avail mem = 7859404800 (7495MB) random: good seed from bootblocks mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 3.2 @ 0x69f6a000 (49 entries) bios0: vendor Intel Corp. version "JYGLKCPX.86A.0065.2021.0722.1137" date 07/22/2021 bios0: Intel(R) Client Systems NUC7CJYHN acpi0 at bios0: ACPI 6.1 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP FPDT FIDT MCFG DBG2 DBGP HPET LPIT APIC NPKT SSDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT BGRT TPM2 DMAR WDAT WSMT acpi0: wakeup devices SIO1(S3) HDAS(S3) XHC_(S4) XDCI(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4) RP05(S4) PXSX(S4) RP06(S4) PXSX(S4) [...] acpitimer0 at acpi0: 3579545 Hz, 32 bits acpimcfg0 at acpi0 acpimcfg0: addr 0xe0000000, bus 0-255 acpihpet0 at acpi0: 19200000 Hz acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Celeron(R) J4025 CPU @ 2.00GHz, 1994.48 MHz, 06-7a-08 cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36 ,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAI T,DS- CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,PO PCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF ,ITSC,FSGSBASE,TSC_ADJUST,SGX,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,PT,S HA,UMIP,MD_CLEAR,IBRS,IBPB,STIBP,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETB V1,XSAVES cpu0: 4MB 64b/line 16-way L2 cache cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges cpu0: apic clock running at 19MHz cpu0: mwait min=64, max=64, C-substates=0.2.0.2.4.2.1.1, IBE cpu1 at mainbus0: apid 2 (application processor) cpu1: Intel(R) Celeron(R) J4025 CPU @ 2.00GHz, 1994.49 MHz, 06-7a-08 cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36 ,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAI T,DS- CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,PO PCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF ,ITSC,FSGSBASE,TSC_ADJUST,SGX,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,PT,S HA,UMIP,MD_CLEAR,IBRS,IBPB,STIBP,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETB V1,XSAVES cpu1: 4MB 64b/line 16-way L2 cache cpu1: smt 0, core 1, package 0 ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 120 pins acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (RP01) acpiprt2 at acpi0: bus -1 (RP02) acpiprt3 at acpi0: bus 1 (RP03) acpiprt4 at acpi0: bus -1 (RP04) acpiprt5 at acpi0: bus 2 (RP05) acpiprt6 at acpi0: bus -1 (RP06) acpiec0 at acpi0 acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001 "ALPS0001" at acpi0 not configured "WCOM508E" at acpi0 not configured acpicmos0 at acpi0 acpibtn0 at acpi0: PWRB acpibtn1 at acpi0: SLPB glkgpio0 at acpi0 GPO1 uid 1 addr 0xd0c40000/0xcef irq 14, 80 pins glkgpio1 at acpi0 GPO0 uid 2 addr 0xd0c50000/0xaff irq 14, 80 pins glkgpio2 at acpi0 GPO2 uid 3 addr 0xd0c90000/0x7bf irq 15, 20 pins glkgpio3 at acpi0 GPO3 uid 4 addr 0xd0c80000/0x82f irq 14, 35 pins "INT0E0C" at acpi0 not configured "INT33A1" at acpi0 not configured tpm0 at acpi0 TPM_ 2.0 (CRB) addr 0xfed40000/0x5000, device 0x00000000 rev 0x0 "PNP0C0B" at acpi0 not configured "PNP0C14" at acpi0 not configured acpipwrres0 at acpi0: DRST acpipwrres1 at acpi0: DRST acpipwrres2 at acpi0: DRST acpipwrres3 at acpi0: DRST acpipwrres4 at acpi0: DRST acpipwrres5 at acpi0: DRST acpipwrres6 at acpi0: WRST acpicpu0 at acpi0: C3(10@150 mwait.1@0x60), C2(10@50 mwait.1@0x21), C1(1000@1 mwait.1@0x1), PSS acpicpu1 at acpi0: C3(10@150 mwait.1@0x60), C2(10@50 mwait.1@0x21), C1(1000@1 mwait.1@0x1), PSS acpipwrres7 at acpi0: FN00, resource for FAN0 acpitz0 at acpi0: critical temperature is 95 degC acpivideo0 at acpi0: GFX0 acpivout0 at acpivideo0: DD1F cpu0: Enhanced SpeedStep 1994 MHz: speeds: 2001, 2000, 1900, 1800, 1700, 1600, 1500, 1400, 1300, 1200, 1100, 1000, 900, 800 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Gemini Lake Host" rev 0x06 inteldrm0 at pci0 dev 2 function 0 "Intel UHD Graphics 600" rev 0x06 drm0 at inteldrm0 inteldrm0: msi, GEMINILAKE, gen 9 iwm0 at pci0 dev 12 function 0 "Intel AC 9560" rev 0x06, msix azalia0 at pci0 dev 14 function 0 "Intel Gemini Lake HD Audio" rev 0x06: msi azalia0: no supported codecs "Intel Gemini Lake MEI" rev 0x06 at pci0 dev 15 function 0 not configured ahci0 at pci0 dev 18 function 0 "Intel Gemini Lake AHCI" rev 0x06: msi, AHCI 1.3.1 ahci0: port 0: 6.0Gb/s ahci0: PHY offline on port 1 scsibus1 at ahci0: 32 targets sd0 at scsibus1 targ 0 lun 0: <ATA, KINGSTON SA400S3, S3E0> naa.50026b7784909eb6 sd0: 114473MB, 512 bytes/sector, 234441648 sectors, thin ppb0 at pci0 dev 19 function 0 "Intel Gemini Lake PCIE" rev 0xf6: msi pci1 at ppb0 bus 1 unknown vendor 0x1aea product 0x6625 (class undefined unknown subclass 0x00, rev 0x00) at pci1 dev 0 function 0 not configured ppb1 at pci0 dev 19 function 2 "Intel Gemini Lake PCIE" rev 0xf6: msi pci2 at ppb1 bus 2 re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x15: RTL8168H/8111H (0x5400), msi, address 88:ae:dd:01:84:96 rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0 xhci0 at pci0 dev 21 function 0 "Intel Gemini Lake xHCI" rev 0x06: msi, xHCI 1.0 usb0 at xhci0: USB revision 3.0 uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 sdhc0 at pci0 dev 28 function 0 "Intel Gemini Lake eMMC" rev 0x06: apic 1 int 39 sdhc0: SDHC 3.0, 200 MHz base clock sdmmc0 at sdhc0: 8-bit, sd high-speed, mmc high-speed, ddr52, dma pcib0 at pci0 dev 31 function 0 "Intel Gemini Lake LPC" rev 0x06 ichiic0 at pci0 dev 31 function 1 "Intel Gemini Lake SMBus" rev 0x06: apic 1 int 20 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 4GB DDR4 SDRAM PC4-17000 SO-DIMM spdmem1 at iic0 addr 0x52: 4GB DDR4 SDRAM PC4-17000 SO-DIMM isa0 at pcib0 isadma0 at isa0 fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo com0: probed fifo depth: 0 bytes pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard pcppi0 at isa0 port 0x61 spkr0 at pcppi0 vmm0 at mainbus0: VMX/EPT efifb at mainbus0 not configured fdc0: drive 0: unknown device type 0xf0 sdmmc0: can't enable card ugen0 at uhub0 port 9 "Intel product 0x0aaa" rev 2.00/0.02 addr 2 vscsi0 at root scsibus2 at vscsi0: 256 targets softraid0 at root scsibus3 at softraid0: 256 targets root on sd0a (103e33e3074926f9.a) swap on sd0b dump on sd0b WARNING: clock gained 2 days WARNING: CHECK AND RESET THE DATE! drm:pid0:intel_step_init *WARNING* [drm] Unknown revid 0x06 inteldrm0: 1024x768, 32bpp wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0 wsdisplay0: screen 1-5 added (std, vt100 emulation) iwm0: hw rev 0x310, fw ver 46.4e1ceb39.0, address d4:54:8b:09:6b:ea fdc0: drive 1: unknown device type 0xf0 I've also tried a current kernel with AZALIA_DEBUG enabled, which leads to: azalia0 at pci0 dev 14 function 0 "Intel Gemini Lake HD Audio" rev 0x06: msi azalia0: no supported codecs azalia0 at pci0 dev 14 function 0 "Intel Gemini Lake HD Audio" rev 0x06: msi azalia_reset: resetting azalia_reset: reset counter = 5000 azalia_reset: reset counter = 4985 azalia0: host: High Definition Audio rev. 1.0 azalia0: host: 6 output, 7 input, and 0 bidi streams azalia0: found a codec at #2 azalia_init_corb: CORB allocation succeeded. azalia_init_corb: CORBWP=0; size=256 azalia_init_rirb: RIRB allocation succeeded. azalia_init_rirb: RIRBRP=0, size=256 azalia0: codec[2] vid 0x8086280d, subid 0x20728086, rev. 0.0, HDA version 1.0 azalia0: nidstart=1 #functions=1 azalia_codec_init: FTYPE result = 0x00000001 azalia_codec_init: There are 2 widgets in the audio function. azalia0: dac02 wcap=6611<POWER,DIGITAL,FORMATOV,STEREO> azalia0: unknown03 wcap=40778d<POWER,DIGITAL,CONNLIST,UNSOL,AMPOV,OUTAMP,STEREO> azalia_codec_sort_pins: analog out pins: azalia_codec_sort_pins: digital out pins: 0x03->0x02 azalia_codec_sort_pins: analog in pins: azalia_codec_sort_pins: digital in pins: azalia0: dacgroup[0]: 02 azalia0: no supported codecs azalia_pci_detach azalia_pci_detach: delete streams azalia_pci_detach: delete codecs azalia_pci_detach: delete CORB and RIRB azalia_pci_detach: disable interrupts azalia_pci_detach: clear interrupts azalia_pci_detach: delete PCI resources -- David
