Hello Stuart, I noticed that someone else had a similar issue on the openbsd-bugs list.. https://marc.info/?l=openbsd-bugs&m=166497715729842&w=2
I was able to apply a patch I found from another user (Joe Miller) which masks out GPE_L6F messages and the problem was resolved. https://gist.github.com/joemiller/9f5698c5634d4a93d101985dc5238365 https://news.ycombinator.com/item?id=33279037 After applying his patch (removing the additional printing parts) My system was restored to what should be expected. Output from system after applying patch and Idle # systat 2 users Load 0.67 0.62 0.59 carpenter.mis.com 12:49:42 memory totals (in KB) PAGING SWAPPING Interrupts real virtual free in out in out 217 total Active 35412 35412 7426456 ops 200 clock All 341964 341964 11627448 pages 15 ipi acpi0 Proc:r d s w Csw Trp Sys Int Sof Flt forks inteldrm 89 19 10 2 50 4 fkppw nvme0 fksvm xhci1 0.0%Int 0.0%Spn 0.0%Sys 0.0%Usr 100.0%Idle pwait igc0:0 | | | | | | | | | | | relck igc0:1 rlkok igc0 noram 1 igc1:0 Namei Sys-cache Proc-cache No-cache ndcpy 1 igc1:1 Calls hits % hits % miss % fltcp igc1 zfod cow Disks sd0 64736 fmin seeks 86314 ftarg xfers itarg speed 29 wired sec pdfre pdscn pzidl 3 IPKTS 11 kmape 1 OPKTS Here is some vmstat -i output (after patch): carpenter$ vmstat -i interrupt total rate irq0/clock 1786426 399 irq0/ipi 2029930 454 irq97/acpi0 1 0 irq145/inteldrm0 226 0 irq99/nvme0 13459 3 irq103/xhci1 402 0 irq114/igc0:0 396272 88 irq115/igc0:1 617332 138 irq116/igc0 12 0 irq117/igc1:0 10284 2 irq118/igc1:1 9730 2 irq119/igc1 2 0 Total 4864076 1088 Then I did some iperf3 testing: (RAW IP) # iperf3 -c 192.168.99.2 -t 30 [ ID] Interval Transfer Bitrate [ 5] 0.00-30.00 sec 6.31 GBytes 1.81 Gbits/sec sender [ 5] 0.00-30.00 sec 6.31 GBytes 1.81 Gbits/sec receiver Got line-rate by after window expanded about 10 seconds in: [ 5] 10.00-11.00 sec 281 MBytes 2.35 Gbits/sec (Wireguard tunnel) # iperf3 -c 192.168.99.2 -t 30 -P5 [ ID] Interval Transfer Bitrate [SUM] 0.00-10.00 sec 933 MBytes 783 Mbits/sec sender [SUM] 0.00-10.00 sec 933 MBytes 783 Mbits/sec receiver Then while doing wireguard test this was from systat: 2 users Load 1.11 0.78 0.44 carpenter.mis.com 11:48:43 PID USER NAME CPU 10\ 20\ 30\ 40\ 50\ 60\ 70\ 80\ 90\ 100\ <idle> 18.90 ########## 36436 root softnet 16.50 ######### 19459 root wg_crypt 10.55 ###### 22373 root wg_crypt 10.50 ###### 39927 root wg_crypt 10.01 ###### 79109 root wg_crypt 9.81 ##### 7645 root softnet 9.77 ##### 84423 carpenter iperf3 5.08 ### 17248 root softnet 1.66 So other than Intel fixing the BIOS to stop this 6F spam is there anything else we can do? Otherwise for now I will be running with this patch to ACPI.C to mask out L6F. Thanks On Sat, 14 Jan 2023 at 09:32, Bradley Latus <brad.la...@gmail.com> wrote: > > Hello Stuart, > > I have tried a snapshot but will give that a go again > > Won't be able to try the random disabling of acpi devices until I'm back > hands on with them next week. > > > Thanks > > On Fri, 13 Jan 2023, 15:18 Bradley Latus, <brad.la...@gmail.com> wrote: >> >> Some additional information: >> >> When running iperf3 between two of these machines (connected back/back) the >> throughput is very low. >> >> PF is running with just the 'default' ruleset on both machines. >> # pfctl -s rules >> block return all >> pass all flags S/SA >> block return in on ! lo0 proto tcp from any to any port 6000:6010 >> block return out log proto tcp all user = 55 >> block return out log proto udp all user = 55 >> >> Considering these IGC interfaces are 2.5Gbit/s, I cannot help feeling it is >> being hampered by this constant ACPI spam. >> >> So raw IP >> # iperf3 -c 192.168.99.2 -P5 >> [ ID] Interval Transfer Bitrate >> [SUM] 0.00-10.01 sec 171 MBytes 143 Mbits/sec sender >> [SUM] 0.00-10.02 sec 170 MBytes 143 Mbits/sec >> receiver >> >> Adding wireguard on top: >> # iperf3 -c 172.16.1.1 -P5 >> [SUM] 0.00-10.01 sec 55.6 MBytes 46.6 Mbits/sec sender >> [SUM] 0.00-10.03 sec 55.5 MBytes 46.4 Mbits/sec >> receiver >> >> >> Thanks >> >> On Fri, 13 Jan 2023 at 10:02, Bradley Latus <brad.la...@gmail.com> wrote: >>> >>> Hello all, >>> >>> I have an issue with my new intel NUC that I am trying to use as a PF >>> firewall box. >>> I have already tried upgrading to the latest BIOS but that does not appear >>> to have worked. >>> >>> Basically when you look at systat all I see 100% usage of 1 core servicing >>> ACPI0, on a completely otherwise idle system. >>> >>> Is there a way to isolate what is causing this issue? >>> I understand that I can rebuild with acpi_debug turned on but when I tried >>> the system was basically unresponsive as so many messages went by. >>> >>> Systat outputs: >>> 2 users Load 1.66 1.24 0.57 carpenter 09:54:21 >>> >>> PID USER NAME CPU 10\ 20\ >>> 30\ 40\ 50\ 60\ 70\ 80\ 90\ 100\ >>> 46868 root acpi0 89.26 >>> ##################################################### >>> <idle> 46.19 >>> ########################### >>> 65226 carpenter systat 1.27 >>> 38804 root sensors 1.12 >>> >>> 2 users Load 1.34 1.21 0.59 carpenter 09:55:04 >>> >>> memory totals (in KB) PAGING SWAPPING >>> Interrupts >>> real virtual free in out in out >>> 361 total >>> Active 35480 35480 6367572 ops >>> 200 clock >>> All 1400840 1400840 10568564 pages >>> 16 ipi >>> >>> 143 acpi0 >>> Proc:r d s w Csw Trp Sys Int Sof Flt >>> forks inteldrm >>> 83 301 1 11 145 51 4 >>> fkppw nvme0 >>> >>> fksvm xhci1 >>> 4.9%Int 1.0%Spn 46.6%Sys 0.0%Usr 47.5%Idle pwait >>> igc0:0 >>> | | | | | | | | | | | >>> relck igc0 >>> ||@======================= rlkok >>> 2 igc1:0 >>> >>> noram igc1:1 >>> Namei Sys-cache Proc-cache No-cache ndcpy >>> igc1 >>> Calls hits % hits % miss % >>> fltcp >>> 10 10 100 >>> zfod >>> >>> cow >>> Disks sd0 >>> 64736 fmin >>> seeks >>> 86314 ftarg >>> xfers >>> itarg >>> speed >>> 29 wired >>> sec >>> pdfre >>> >>> pdscn >>> >>> pzidl 3 IPKTS >>> >>> 10 kmape 1 OPKTS >>> >>> dmesg output: >>> >>> >>> carpenter$ dmesg >>> OpenBSD 7.2 (GENERIC.MP) #758: Tue Sep 27 11:57:54 MDT 2022 >>> dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP >>> real mem = 8212676608 (7832MB) >>> avail mem = 7946371072 (7578MB) >>> random: good seed from bootblocks >>> mpath0 at root >>> scsibus0 at mpath0: 256 targets >>> mainbus0 at root >>> bios0 at mainbus0: SMBIOS rev. 3.3 @ 0x414c8000 (124 entries) >>> bios0: vendor Intel Corp. version "TNTGL357.0070.2022.1028.1209" date >>> 10/28/2022 >>> bios0: Intel(R) Client Systems NUC11TNHi3 >>> acpi0 at bios0: ACPI 6.2 >>> acpi0: sleep states S0 S3 S4 S5 >>> acpi0: tables DSDT FACP SSDT FIDT SSDT SSDT SSDT HPET APIC SSDT SSDT NHLT >>> UEFI LPIT WDAT SSDT SSDT DBGP DBG2 DMAR FPDT SSDT MCFG SSDT BGRT TPM2 PTDT >>> WSMT >>> acpi0: wakeup devices PEGP(S4) PEGP(S4) PEGP(S4) PEG0(S4) PEGP(S4) SIO1(S3) >>> RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4) >>> RP05(S4) PXSX(S4) [...] >>> acpitimer0 at acpi0: 3579545 Hz, 24 bits >>> acpihpet0 at acpi0: 19200000 Hz >>> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat >>> cpu0 at mainbus0: apid 0 (boot processor) >>> cpu0: 11th Gen Intel(R) Core(TM) i3-1115G4 @ 3.00GHz, 4090.57 MHz, 06-8c-01 >>> cpu0: >>> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,CLWB,PT,AVX512CD,SHA,AVX512BW,AVX512VL,AVX512VBMI,UMIP,PKU,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES >>> cpu0: 48KB 64b/line 12-way D-cache, 32KB 64b/line 8-way I-cache, 1MB >>> 64b/line 20-way L2 cache, 6MB 64b/line 12-way L3 cache >>> cpu0: smt 0, core 0, package 0 >>> mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges >>> cpu0: apic clock running at 38MHz >>> cpu0: mwait min=64, max=64, C-substates=0.2.0.1.2.1.1.1, IBE >>> cpu1 at mainbus0: apid 2 (application processor) >>> cpu1: 11th Gen Intel(R) Core(TM) i3-1115G4 @ 3.00GHz, 4090.57 MHz, 06-8c-01 >>> cpu1: >>> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,CLWB,PT,AVX512CD,SHA,AVX512BW,AVX512VL,AVX512VBMI,UMIP,PKU,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES >>> cpu1: 48KB 64b/line 12-way D-cache, 32KB 64b/line 8-way I-cache, 1MB >>> 64b/line 20-way L2 cache, 6MB 64b/line 12-way L3 cache >>> cpu1: smt 0, core 1, package 0 >>> cpu2 at mainbus0: apid 1 (application processor) >>> cpu2: 11th Gen Intel(R) Core(TM) i3-1115G4 @ 3.00GHz, 4090.57 MHz, 06-8c-01 >>> cpu2: >>> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,CLWB,PT,AVX512CD,SHA,AVX512BW,AVX512VL,AVX512VBMI,UMIP,PKU,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES >>> cpu2: 48KB 64b/line 12-way D-cache, 32KB 64b/line 8-way I-cache, 1MB >>> 64b/line 20-way L2 cache, 6MB 64b/line 12-way L3 cache >>> cpu2: smt 1, core 0, package 0 >>> cpu3 at mainbus0: apid 3 (application processor) >>> cpu3: 11th Gen Intel(R) Core(TM) i3-1115G4 @ 3.00GHz, 4090.57 MHz, 06-8c-01 >>> cpu3: >>> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,CLWB,PT,AVX512CD,SHA,AVX512BW,AVX512VL,AVX512VBMI,UMIP,PKU,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES >>> cpu3: 48KB 64b/line 12-way D-cache, 32KB 64b/line 8-way I-cache, 1MB >>> 64b/line 20-way L2 cache, 6MB 64b/line 12-way L3 cache >>> cpu3: smt 1, core 1, package 0 >>> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins >>> acpimcfg0 at acpi0 >>> acpimcfg0: addr 0xc0000000, bus 0-89 >>> acpiprt0 at acpi0: bus 0 (PC00) >>> acpiprt1 at acpi0: bus 1 (PEG0) >>> acpiprt2 at acpi0: bus -1 (RP01) >>> acpiprt3 at acpi0: bus -1 (RP02) >>> acpiprt4 at acpi0: bus -1 (RP03) >>> acpiprt5 at acpi0: bus -1 (RP04) >>> acpiprt6 at acpi0: bus -1 (RP05) >>> acpiprt7 at acpi0: bus -1 (RP06) >>> acpiprt8 at acpi0: bus -1 (RP07) >>> acpiprt9 at acpi0: bus -1 (RP08) >>> acpiprt10 at acpi0: bus -1 (RP09) >>> acpiprt11 at acpi0: bus 88 (RP10) >>> acpiprt12 at acpi0: bus -1 (RP11) >>> acpiprt13 at acpi0: bus 89 (RP12) >>> acpiprt14 at acpi0: bus -1 (RP13) >>> acpiprt15 at acpi0: bus -1 (RP14) >>> acpiprt16 at acpi0: bus -1 (RP15) >>> acpiprt17 at acpi0: bus -1 (RP16) >>> acpiprt18 at acpi0: bus -1 (RP17) >>> acpiprt19 at acpi0: bus -1 (RP18) >>> acpiprt20 at acpi0: bus -1 (RP19) >>> acpiprt21 at acpi0: bus -1 (RP20) >>> acpiprt22 at acpi0: bus -1 (RP21) >>> acpiprt23 at acpi0: bus -1 (RP22) >>> acpiprt24 at acpi0: bus -1 (RP23) >>> acpiprt25 at acpi0: bus -1 (RP24) >>> acpiprt26 at acpi0: bus 2 (TRP1) >>> acpiprt27 at acpi0: bus 45 (TRP2) >>> acpiec0 at acpi0 >>> acpipci0 at acpi0 PC00: 0x00000000 0x00000011 0x00000001 >>> com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo >>> "INT3515" at acpi0 not configured >>> "ACPI000E" at acpi0 not configured >>> pchgpio0 at acpi0 GPI0 addr 0xfd6e0000/0x10000 0xfd6d0000/0x10000 >>> 0xfd6a0000/0x10000 0xfd690000/0x10000 irq 14, 360 pins >>> acpibtn0 at acpi0: SLPB >>> "PNP0C14" at acpi0 not configured >>> "PNP0C14" at acpi0 not configured >>> "INT33A1" at acpi0 not configured >>> acpibtn1 at acpi0: PWRB >>> tpm0 at acpi0 TPM_ 2.0 (CRB) addr 0xfed40000/0x5000, device 0x00000000 rev >>> 0x0 >>> "PNP0C0B" at acpi0 not configured >>> "PNP0C0B" at acpi0 not configured >>> "PNP0C0B" at acpi0 not configured >>> "PNP0C0B" at acpi0 not configured >>> "PNP0C0B" at acpi0 not configured >>> "PNP0C14" at acpi0 not configured >>> acpipwrres0 at acpi0: V0PR >>> acpipwrres1 at acpi0: V1PR >>> acpipwrres2 at acpi0: V2PR >>> acpipwrres3 at acpi0: PXTC >>> acpipwrres4 at acpi0: PTPL >>> acpipwrres5 at acpi0: PXTC >>> acpipwrres6 at acpi0: PXTC >>> acpipwrres7 at acpi0: WRST >>> acpipwrres8 at acpi0: TBT0, resource for TDM0, TRP0, TRP1 >>> acpipwrres9 at acpi0: TBT1, resource for TDM1, TRP2, TRP3 >>> acpipwrres10 at acpi0: D3C_, resource for TXHC, TDM0, TDM1, TRP0, TRP1, >>> TRP2, TRP3 >>> acpipwrres11 at acpi0: PAUD, resource for HDAS >>> acpicpu0 at acpi0: C3(200@1048 mwait.1@0x60), C2(200@253 mwait.1@0x31), >>> C1(1000@1 mwait.1), PSS >>> acpicpu1 at acpi0: C3(200@1048 mwait.1@0x60), C2(200@253 mwait.1@0x31), >>> C1(1000@1 mwait.1), PSS >>> acpicpu2 at acpi0: C3(200@1048 mwait.1@0x60), C2(200@253 mwait.1@0x31), >>> C1(1000@1 mwait.1), PSS >>> acpicpu3 at acpi0: C3(200@1048 mwait.1@0x60), C2(200@253 mwait.1@0x31), >>> C1(1000@1 mwait.1), PSS >>> acpipwrres12 at acpi0: FN00, resource for FAN0 >>> acpipwrres13 at acpi0: FN01, resource for FAN1 >>> acpipwrres14 at acpi0: FN02, resource for FAN2 >>> acpipwrres15 at acpi0: FN03, resource for FAN3 >>> acpipwrres16 at acpi0: FN04, resource for FAN4 >>> acpitz0 at acpi0: critical temperature is 119 degC >>> acpipwrres17 at acpi0: PIN_ >>> acpivideo0 at acpi0: GFX0 >>> acpivout0 at acpivideo0: DD1F >>> acpivout1 at acpivideo0: DD2F >>> cpu0: Enhanced SpeedStep 4090 MHz: speeds: 2901, 2900, 2800, 2600, 2400, >>> 2200, 2100, 1700, 1600, 1500, 1300, 1100, 1000, 800, 600, 400 MHz >>> pci0 at mainbus0 bus 0 >>> 0:31:5: mem address conflict 0xfe010000/0x1000 >>> pchb0 at pci0 dev 0 function 0 "Intel Core 11G Host" rev 0x01 >>> inteldrm0 at pci0 dev 2 function 0 "Intel UHD Graphics" rev 0x01 >>> drm0 at inteldrm0 >>> inteldrm0: msi, TIGERLAKE, gen 12 >>> ppb0 at pci0 dev 6 function 0 "Intel Core 11G PCIE" rev 0x01: msi >>> pci1 at ppb0 bus 1 >>> nvme0 at pci1 dev 0 function 0 unknown vendor 0xc0a9 product 0x540a rev >>> 0x01: msix, NVMe 1.4 >>> nvme0: CT500P3SSD8, firmware P9CR30A, serial 2239E66ED8C4 >>> scsibus1 at nvme0: 2 targets, initiator 0 >>> sd0 at scsibus1 targ 1 lun 0: <NVMe, CT500P3SSD8, P9CR> >>> sd0: 476940MB, 512 bytes/sector, 976773168 sectors >>> ppb1 at pci0 dev 7 function 0 "Intel Core 11G PCIE" rev 0x01: msi >>> pci2 at ppb1 bus 2 >>> ppb2 at pci0 dev 7 function 2 "Intel Core 11G PCIE" rev 0x01: msi >>> pci3 at ppb2 bus 45 >>> "Intel Core 11G GNA" rev 0x01 at pci0 dev 8 function 0 not configured >>> xhci0 at pci0 dev 13 function 0 "Intel Core 11G xHCI" rev 0x01: msi, xHCI >>> 1.20 >>> usb0 at xhci0: USB revision 3.0 >>> uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev >>> 3.00/1.00 addr 1 >>> "Intel Core 11G TBT" rev 0x01 at pci0 dev 13 function 2 not configured >>> "Intel Core 11G TBT" rev 0x01 at pci0 dev 13 function 3 not configured >>> xhci1 at pci0 dev 20 function 0 "Intel 500 Series xHCI" rev 0x20: msi, xHCI >>> 1.20 >>> usb1 at xhci1: USB revision 3.0 >>> uhub1 at usb1 configuration 1 interface 0 "Intel xHCI root hub" rev >>> 3.00/1.00 addr 1 >>> "Intel 500 Series Shared SRAM" rev 0x20 at pci0 dev 20 function 2 not >>> configured >>> dwiic0 at pci0 dev 21 function 0 "Intel 500 Series I2C" rev 0x20: apic 2 >>> int 27 >>> iic0 at dwiic0 >>> dwiic1 at pci0 dev 21 function 1 "Intel 500 Series I2C" rev 0x20: apic 2 >>> int 40 >>> iic1 at dwiic1 >>> "INT3515" at iic1 addr 0x25 not configured >>> "Intel 500 Series HECI" rev 0x20 at pci0 dev 22 function 0 not configured >>> ahci0 at pci0 dev 23 function 0 "Intel 500 Series AHCI" rev 0x20: msi, AHCI >>> 1.3.1 >>> ahci0: PHY offline on port 0 >>> scsibus2 at ahci0: 32 targets >>> ppb3 at pci0 dev 29 function 0 "Intel 500 Series PCIE" rev 0x20: msi >>> pci4 at ppb3 bus 88 >>> igc0 at pci4 dev 0 function 0 "Intel I225-LM" rev 0x03, msix, 2 queues, >>> address 48:21:0b:37:87:17 >>> ppb4 at pci0 dev 29 function 3 "Intel 500 Series PCIE" rev 0x20: msi >>> pci5 at ppb4 bus 89 >>> igc1 at pci5 dev 0 function 0 "Intel I225-LM" rev 0x03, msix, 2 queues, >>> address 48:21:0b:36:f9:ca >>> pcib0 at pci0 dev 31 function 0 "Intel 500 Series eSPI" rev 0x20 >>> azalia0 at pci0 dev 31 function 3 "Intel 500 Series HD Audio" rev 0x20: msi >>> azalia0: no supported codecs >>> ichiic0 at pci0 dev 31 function 4 "Intel 500 Series SMBus" rev 0x20: apic 2 >>> int 16 >>> iic2 at ichiic0 >>> spdmem0 at iic2 addr 0x50: 4GB DDR4 SDRAM PC4-21300 SO-DIMM >>> spdmem1 at iic2 addr 0x52: 4GB DDR4 SDRAM PC4-21300 SO-DIMM >>> "Intel 500 Series SPI" rev 0x20 at pci0 dev 31 function 5 not configured >>> isa0 at pcib0 >>> isadma0 at isa0 >>> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo >>> com1: probed fifo depth: 0 bytes >>> pcppi0 at isa0 port 0x61 >>> spkr0 at pcppi0 >>> vmm0 at mainbus0: VMX/EPT >>> efifb at mainbus0 not configured >>> uhidev0 at uhub1 port 2 configuration 1 interface 0 "Chicony HP Elite USB >>> Keyboard" rev 1.10/1.21 addr 2 >>> uhidev0: iclass 3/1 >>> ukbd0 at uhidev0: 8 variable keys, 6 key codes >>> wskbd0 at ukbd0: console keyboard >>> uhidev1 at uhub1 port 2 configuration 1 interface 1 "Chicony HP Elite USB >>> Keyboard" rev 1.10/1.21 addr 2 >>> uhidev1: iclass 3/0, 2 report ids >>> uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0 >>> ucc0 at uhidev1 reportid 2: 768 usages, 18 keys, array >>> wskbd1 at ucc0 mux 1 >>> uhub2 at uhub1 port 4 configuration 1 interface 0 "Genesys Logic USB2.0 >>> Hub" rev 2.00/88.32 addr 3 >>> vscsi0 at root >>> scsibus3 at vscsi0: 256 targets >>> softraid0 at root >>> scsibus4 at softraid0: 256 targets >>> root on sd0a (705f03ac8a9a3d25.a) swap on sd0b dump on sd0b >>> inteldrm0: 1920x1200, 32bpp >>> wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0 >>> wskbd1: connecting to wsdisplay0 >>> wsdisplay0: screen 1-5 added (std, vt100 emulation) >>> >>> -- >>> Best Regards, >>> Brad Latus >> >> >> >> -- >> Best Regards, >> Brad Latus -- Best Regards, Brad Latus
