I'm trying to set up OpenBSD on an Always Free VM.Standard.E2.1.Micro instance and I keep getting a page fault (log included below). I created an instance using the default Oracle Linux 8 image with all default settings except for disabling in-transit encryption. From there I just dd'd the install72.img to /dev/sda and rebooted into the cloud shell.I also used `set tty com0` as suggested here: https://www.alextsang.net/articles/20221022-132025/index.html I also tried starting the instance using the Ubuntu image, disabling all the Oracle Cloud Agent services as well as writing the miniroot72.img but nothing worked. Here is the output: >> OpenBSD/amd64 BOOTX64 3.62 boot> cannot open hd0a:/etc/random.seed: No such file or directory booting hd0a:/7.2/amd64/bsd.rd: 3916484+1639424+3884040+0+704512 [109+438912+292606]=0xa61d70 entry point at 0x1001000 Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2022 OpenBSD. All rights reserved. https://www.OpenBSD.org
OpenBSD 7.2 (RAMDISK_CD) #725: Tue Sep 27 12:02:48 MDT 2022 dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD real mem = 1049554944 (1000MB) avail mem = 1013784576 (966MB) random: good seed from bootblocks mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.8 @ 0x3f940000 (9 entries) bios0: bios0: QEMU Standard PC (i440FX + PIIX, 1996) acpi0 at bios0: ACPI 1.0 acpi0: tables DSDT FACP APIC HPET BGRT acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: AMD EPYC 7551 32-Core Processor, 3594.00 MHz, 17-01-02 cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,HV,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,TOPEXT,CPCTR,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,RDSEED,ADX,SMAP,CLFLUSHOPT,SHA,IBPB,VIRTSSBD,XSAVEOPT,XSAVEC,XGETBV1,XSAVES cpu0: 64KB 64b/line 2-way D-cache, 64KB 64b/line 2-way I-cache, 512KB 64b/line 16-way L2 cache, 16MB 64b/line 16-way L3 cache cpu0: apic clock running at 1830MHz cpu at mainbus0: not configured ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 11, 24 pins acpihpet0 at acpi0: 100000000 Hz acpiprt0 at acpi0: bus 0 (PCI0) "ACPI0006" at acpi0 not configured acpipci0 at acpi0 PCI0 acpicmos0 at acpi0 com0 at acpi0 COM1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo com0: console "QEMU0001" at acpi0 not configured "PNP0A06" at acpi0 not configured "PNP0A06" at acpi0 not configured "PNP0A06" at acpi0 not configured "QEMU0002" at acpi0 not configured "ACPI0010" at acpi0 not configured acpicpu at acpi0 not configured pvbus0 at mainbus0: KVM pci0 at mainbus0 bus 0 0:2:0: rom address conflict 0xffff0000/0x10000 pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02 "Intel 82371SB ISA" rev 0x00 at pci0 dev 1 function 0 not configured pciide0 at pci0 dev 1 function 1 "Intel 82371SB IDE" rev 0x00: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility pciide0: channel 0 ignored (disabled) pciide0: channel 1 ignored (disabled) uhci0 at pci0 dev 1 function 2 "Intel 82371SB USB" rev 0x01: apic 0 int 11 "Intel 82371AB Power" rev 0x03 at pci0 dev 1 function 3 not configured "Bochs VGA" rev 0x02 at pci0 dev 2 function 0 not configured virtio0 at pci0 dev 3 function 0 "Qumranet Virtio Network" rev 0x00 vio0 at virtio0: address 02:00:17:03:5f:26 virtio0: msix shared virtio1 at pci0 dev 4 function 0 "Qumranet Virtio SCSI" rev 0x00 vioscsi0 at virtio1: qsize 128 scsibus0 at vioscsi0: 255 targets uvm_fault(0xffffffff8190a468, 0x8, 0, 1) -> e fatal page fault in supervisor mode trap type 6 code 0 rip ffffffff8123622b cs 8 rflags 10282 cr2 8 cpl e rsp ffffffff81a06670 gsbase 0xffffffff818f6ff0 kgsbase 0x0 panic: trap type 6, code=0, pc=ffffffff8123622b The operating system has halted. Please press any key to reboot.