Try to add an entry in grub like in this article:

https://raby.sh/installing-openbsd-on-ovhs-vps-2016-kvm-machines.html

On Wednesday, April 5, 2023, Antun Matanović <matanovic.an...@gmail.com>
wrote:

> I'm trying to set up OpenBSD on an Always Free VM.Standard.E2.1.Micro
> instance and I keep getting a page fault (log included below).
> I created an instance using the default Oracle Linux 8 image with all
> default settings except for disabling in-transit encryption. From
> there I just dd'd the install72.img to /dev/sda and rebooted into the
> cloud shell.I also used `set tty com0` as suggested here:
> https://www.alextsang.net/articles/20221022-132025/index.html
> I also tried starting the instance using the Ubuntu image, disabling
> all the Oracle Cloud Agent services as well as writing the
> miniroot72.img but nothing worked.
> Here is the output:
> >> OpenBSD/amd64 BOOTX64 3.62
> boot>
> cannot open hd0a:/etc/random.seed: No such file or directory
> booting hd0a:/7.2/amd64/bsd.rd: 3916484+1639424+3884040+0+704512
> [109+438912+292606]=0xa61d70
> entry point at 0x1001000
> Copyright (c) 1982, 1986, 1989, 1991, 1993
>         The Regents of the University of California.  All rights reserved.
> Copyright (c) 1995-2022 OpenBSD. All rights reserved.
> https://www.OpenBSD.org
>
> OpenBSD 7.2 (RAMDISK_CD) #725: Tue Sep 27 12:02:48 MDT 2022
>     dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
> real mem = 1049554944 (1000MB)
> avail mem = 1013784576 (966MB)
> random: good seed from bootblocks
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.8 @ 0x3f940000 (9 entries)
> bios0:
> bios0: QEMU Standard PC (i440FX + PIIX, 1996)
> acpi0 at bios0: ACPI 1.0
> acpi0: tables DSDT FACP APIC HPET BGRT
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: AMD EPYC 7551 32-Core Processor, 3594.00 MHz, 17-01-02
> cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,
> CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,
> SSSE3,FMA3,CX16,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,
> AES,XSAVE,AVX,F16C,RDRAND,HV,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,
> LONG,LAHF,CMPLEG,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,
> TOPEXT,CPCTR,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,
> RDSEED,ADX,SMAP,CLFLUSHOPT,SHA,IBPB,VIRTSSBD,XSAVEOPT,
> XSAVEC,XGETBV1,XSAVES
> cpu0: 64KB 64b/line 2-way D-cache, 64KB 64b/line 2-way I-cache, 512KB
> 64b/line 16-way L2 cache, 16MB 64b/line 16-way L3 cache
> cpu0: apic clock running at 1830MHz
> cpu at mainbus0: not configured
> ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 11, 24 pins
> acpihpet0 at acpi0: 100000000 Hz
> acpiprt0 at acpi0: bus 0 (PCI0)
> "ACPI0006" at acpi0 not configured
> acpipci0 at acpi0 PCI0
> acpicmos0 at acpi0
> com0 at acpi0 COM1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo
> com0: console
> "QEMU0001" at acpi0 not configured
> "PNP0A06" at acpi0 not configured
> "PNP0A06" at acpi0 not configured
> "PNP0A06" at acpi0 not configured
> "QEMU0002" at acpi0 not configured
> "ACPI0010" at acpi0 not configured
> acpicpu at acpi0 not configured
> pvbus0 at mainbus0: KVM
> pci0 at mainbus0 bus 0
> 0:2:0: rom address conflict 0xffff0000/0x10000
> pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02
> "Intel 82371SB ISA" rev 0x00 at pci0 dev 1 function 0 not configured
> pciide0 at pci0 dev 1 function 1 "Intel 82371SB IDE" rev 0x00: DMA,
> channel 0 wired to compatibility, channel 1 wired to compatibility
> pciide0: channel 0 ignored (disabled)
> pciide0: channel 1 ignored (disabled)
> uhci0 at pci0 dev 1 function 2 "Intel 82371SB USB" rev 0x01: apic 0 int 11
> "Intel 82371AB Power" rev 0x03 at pci0 dev 1 function 3 not configured
> "Bochs VGA" rev 0x02 at pci0 dev 2 function 0 not configured
> virtio0 at pci0 dev 3 function 0 "Qumranet Virtio Network" rev 0x00
> vio0 at virtio0: address 02:00:17:03:5f:26
> virtio0: msix shared
> virtio1 at pci0 dev 4 function 0 "Qumranet Virtio SCSI" rev 0x00
> vioscsi0 at virtio1: qsize 128
> scsibus0 at vioscsi0: 255 targets
> uvm_fault(0xffffffff8190a468, 0x8, 0, 1) -> e
> fatal page fault in supervisor mode
> trap type 6 code 0 rip ffffffff8123622b cs 8 rflags 10282 cr2 8 cpl e
> rsp ffffffff81a06670
> gsbase 0xffffffff818f6ff0  kgsbase 0x0
> panic: trap type 6, code=0, pc=ffffffff8123622b
>
> The operating system has halted.
> Please press any key to reboot.
>
>

-- 
Atenciosamente,

Fabio Martins

(+5521) 97914-8106 (Signal)
https://www.linkedin.com/in/fabio1337br/

Reply via email to