No worries. (And for anyone following on-list, I think FreeBSD might have subsequently renamed axgbe to something else beginning on ax, I think maybe "axa" as per the "history" note on the bottom of this page https://www.gsp.com/cgi-bin/man.cgi?section=4&topic=AXP)
Sent with Proton Mail secure email. ------- Original Message ------- On Wednesday, April 12th, 2023 at 15:00, Mischa <open...@mlst.nl> wrote: > Hi Laura, > > Gotcha... I don't have those laying around. :) > > Mischa > > On 2023-04-12 15:54, Laura Smith wrote: > > > Hi Mischa > > > > Thank you for that. > > > > However I think perhaps I was a little unclear in my original post, and > > for that I apologise. > > > > To be (more) clear, I was not talking about "network cards in AMD > > computers", I was talking about AMD SoC network ports. > > > > e.g. in FreeBSD land, these are known as "axgbe" > > (https://reviews.freebsd.org/D25793, > > https://doc.dpdk.org/guides/nics/axgbe.html) > > > > ------- Original Message ------- > > On Wednesday, April 12th, 2023 at 12:45, Mischa open...@mlst.nl > > wrote: > > > > > Hi Laura, > > > > > > Just received my replacement card (10G RJ45, in stead of SFP+) for the > > > R6415 EPYC machine. > > > It works without any problems in 7.3. > > > > > > bnxt0: flags=808843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,AUTOCONF4> > > > > > > mtu 1500 > > > lladdr 2c:ea:7f:ad:ff:3e > > > index 3 priority 0 llprio 3 > > > groups: egress > > > media: Ethernet autoselect (10GbaseT full-duplex,rxpause,txpause) > > > status: active > > > inet 192.168.1.107 netmask 0xffffff00 broadcast 192.168.1.255 > > > > > > The dmesg you can find at: > > > https://dmesgd.nycbug.org/index.cgi?do=view&id=7047 > > > The chipset for the SFP+ card is the same. > > > > > > Mischa > > > > > > On 2023-04-12 12:01, Laura Smith wrote: > > > > > > > Has anyone had the opportunity to experiment using OpenBSD in > > > > conjunction with AMD EPYC/RYZEN native 10gb ports ? > > > > > > > > As far as I can see there are no drivers for it in stable ? But maybe > > > > someone's been playing with it on the bleeding-edge ? > > > > > > > > Thanks ! > > > > > > > > Laura