Op 15-04-2024 om 22:20 schreef Peter N. M. Hansteen:
On Mon, Apr 15, 2024 at 10:09:31PM +0200, Karel Lucas wrote:
This gives the following error messages when booting:
no IP address found for igc1:network
/etc/pf.conf:41: could not parse host specification
no IP address found for igc2:network
/etc/pf.conf:42: could not parse host specification
This sounds to me like those interfaces either do not exist or
have not been correctly configured.
Are those interfaces configured, as in do they have IP addresses?
the output of ifconfig igc1 and ifconfig igc2 will show you.
Output from ifconfig igc0:
igc0:
flags=8b43<UP,BROADCAST,RUNNING,PROMISC,ALLMULTI,SIMPLEX,MULTICAST> mtu 1500
lladdr 7c:2b:e1:13:dd:f4
index 1 priority 0 llprio 3
media: Ethernet autoselect (1000baseT full-duplex)
sratus: active
Output from ifconfig igc1:
igc1:
flags=8b43<UP,BROADCAST,RUNNING,PROMISC,ALLMULTI,SIMPLEX,MULTICAST> mtu 1500
lladdr 7c:2b:e1:13:dd:f5
index 2 priority 0 llprio 3
media: Ethernet autoselect (1000baseT full-duplex)
sratus: active
Output from ifconfig igc2:
igc2:
flags=8b43<UP,BROADCAST,RUNNING,PROMISC,ALLMULTI,SIMPLEX,MULTICAST> mtu 1500
lladdr 7c:2b:e1:13:dd:f6
index 3 priority 0 llprio 3
media: Ethernet autoselect (none)
status: no carrier
/etc/hostname.bridge0:
add igc0 add igc1 add igc2 blocknonip igc0 blocknonip igc1 blocknonip
igc2 up
/etc/hostname.igc0:
up
/etc/hostname.igc1:
up
/etc/hostname.igc2:
up
