Hello,

This is a link to a screenshot, I can't copy/paste at this step:

https://ibb.co/tpr8zBz

Thanks a lot !

Comete

Le 24 mai 2024 20:38:45 GMT+02:00, Mike Larkin <mlar...@nested.page> a écrit :
>On Fri, May 24, 2024 at 06:59:24AM +0000, Comète wrote:
>> Thanks Sven,
>>
>> I can't install OpenBDS because I get the error when trying to boot the 
>> install image.
>>
>> Comete
>>
>
>At the boot> prompt, can you show what "mach mem" prints?
>
>Thanks
>
>-ml
>
>> 24 mai 2024 07:48 "Sven Wolf" <mailingl...@fusion-zone.net> a écrit:
>>
>> > Hi,
>> >
>> > I had a silimar issue on a Lenovo V130.
>> > For this machine I needed to remove the amdgpu driver in the kernel.
>> >
>> > See also:
>> > https://marc.info/?l=openbsd-misc&m=160232897421774&w=2
>> > https://marc.info/?l=openbsd-tech&m=160383074317608&w=2
>> >
>> > Do you get the error "entry point at 0x1001000" also with the bsd.rd 
>> > kernel or only after you
>> > installed the system with the bsd.mp/bsd.sp kernel?
>> >
>> > Best regards,
>> > Sven
>> >
>> > On 5/23/24 22:40, Comète wrote:
>> >
>> >> Hello,
>> >> I tried to install OpenBSD 7.5 on a new HP Elitebook 840 G10 (UEFI 
>> >> capable only) without success.
>> >> It is stuck at boot on "entry point at 0x1001000".
>> >> Even retried after a BIOS upgrade but no luck either.
>> >> I tried with a snapshot install too with the same result.
>> >> I post here what lspci returns from a debian bookworm:
>> >> 00:00.0 Host bridge: Intel Corporation Device a706
>> >> 00:02.0 VGA compatible controller: Intel Corporation Raptor Lake-P [Iris 
>> >> Xe Graphics] (rev 04)
>> >> 00:04.0 Signal processing controller: Intel Corporation Raptor Lake 
>> >> Dynamic Platform and Thermal
>> >> Framework Processor Participant
>> >> 00:06.0 PCI bridge: Intel Corporation Raptor Lake PCIe 4.0 Graphics Port
>> >> 00:06.2 PCI bridge: Intel Corporation Device a73d
>> >> 00:07.0 PCI bridge: Intel Corporation Raptor Lake-P Thunderbolt 4 PCI 
>> >> Express Root Port
>> >> 00:07.2 PCI bridge: Intel Corporation Raptor Lake-P Thunderbolt 4 PCI 
>> >> Express Root Port
>> >> 00:08.0 System peripheral: Intel Corporation GNA Scoring Accelerator 
>> >> module
>> >> 00:0a.0 Signal processing controller: Intel Corporation Raptor Lake 
>> >> Crashlog and Telemetry (rev 01)
>> >> 00:0d.0 USB controller: Intel Corporation Raptor Lake-P Thunderbolt 4 USB 
>> >> Controller
>> >> 00:0d.2 USB controller: Intel Corporation Raptor Lake-P Thunderbolt 4 NHI
>> >> 00:0d.3 USB controller: Intel Corporation Raptor Lake-P Thunderbolt 4 NHI
>> >> 00:14.0 USB controller: Intel Corporation Alder Lake PCH USB 3.2 xHCI 
>> >> Host Controller (rev 01)
>> >> 00:14.2 RAM memory: Intel Corporation Alder Lake PCH Shared SRAM (rev 01)
>> >> 00:14.3 Network controller: Intel Corporation Raptor Lake PCH CNVi WiFi 
>> >> (rev 01)
>> >> 00:15.0 Serial bus controller: Intel Corporation Alder Lake PCH Serial IO 
>> >> I2C Controller #0 (rev
>> >> 01)
>> >> 00:16.0 Communication controller: Intel Corporation Alder Lake PCH HECI 
>> >> Controller (rev 01)
>> >> 00:16.3 Serial controller: Intel Corporation Alder Lake AMT SOL 
>> >> Redirection (rev 01)
>> >> 00:1c.0 PCI bridge: Intel Corporation Alder Lake PCH-P PCI Express Root 
>> >> Port #9 (rev 01)
>> >> 00:1e.0 Communication controller: Intel Corporation Alder Lake PCH UART 
>> >> #0 (rev 01)
>> >> 00:1e.2 Serial bus controller: Intel Corporation Alder Lake SPI 
>> >> Controller (rev 01)
>> >> 00:1f.0 ISA bridge: Intel Corporation Raptor Lake LPC/eSPI Controller 
>> >> (rev 01)
>> >> 00:1f.3 Multimedia audio controller: Intel Corporation Raptor Lake-P/U/H 
>> >> cAVS (rev 01)
>> >> 00:1f.4 SMBus: Intel Corporation Alder Lake PCH-P SMBus Host Controller 
>> >> (rev 01)
>> >> 00:1f.5 Serial bus controller: Intel Corporation Alder Lake-P PCH SPI 
>> >> Controller (rev 01)
>> >> 02:00.0 Non-Volatile memory controller: SK hynix BC901 NVMe Solid State 
>> >> Drive (DRAM-less) (rev 03)
>> >> 57:00.0 Wireless controller [0d40]: Intel Corporation XMM7560 LTE 
>> >> Advanced Pro Modem (rev 01)
>> >>> Thanks for your help.
>> >> Comete
>>

-- 
Envoyé de mon téléphone. Excusez la brièveté.

Reply via email to