Hi, thanks Philip for your diagnostic. I will be available to make some tests when someone will have time to spend on it.
Thanks a lot. Regards, Comete 4 juillet 2024 07:14 "Philip Guenther" <guent...@gmail.com> a écrit: > On Mon, Jun 24, 2024 at 2:16 AM Comète <com...@geekandfree.org> wrote: > >> finally i'm still stuck on this problem. Are there any other tests I can do ? > > It looks like this machine has a physical memory layout (available > physical addresses) that OpenBSD doesn't currently support, and the > usual suspects have other things going so no immediate plans to work > on changing that. Sorry it won't work for you. > > Philip Guenther > >> Thank you >> >> Comete >> >> 27 mai 2024 21:24 "Comète" <com...@geekandfree.org> a écrit: >> >> Hi Aaron, >> >> thanks for the idea. Booting the regular kernel as suggested, has the same >> result: >> it freezes on "entry point at 0x1001000" too. >> >> Thanks a lot. >> >> Comete >> >> 27 mai 2024 04:48 "Aaron Mason" <simplersolut...@gmail.com> a écrit: >> >> Hi >> >> Can you try booting the regular kernel? You should be able to do it this way: >> >> boot> /7.5/amd64/bsd >> >> If it makes it past the stage where the install kernel fails, it'll >> panic at the lack of root, which is expected. >> >> Might be a pointless move but it might help eliminate the install >> kernel as a variable. >> >> On Fri, May 24, 2024 at 10:30 PM Comète <com...@geekandfree.org> wrote: >> >> Thanks Sven, >> >> I can't install OpenBDS because I get the error when trying to boot the >> install image. >> >> Comete >> >> 24 mai 2024 07:48 "Sven Wolf" <mailingl...@fusion-zone.net> a écrit: >> >> Hi, >> >> I had a silimar issue on a Lenovo V130. >> For this machine I needed to remove the amdgpu driver in the kernel. >> >> See also: >> https://marc.info/?l=openbsd-misc&m=160232897421774&w=2 >> https://marc.info/?l=openbsd-tech&m=160383074317608&w=2 >> >> Do you get the error "entry point at 0x1001000" also with the bsd.rd kernel >> or only after you >> installed the system with the bsd.mp/bsd.sp kernel? >> >> Best regards, >> Sven >> >> On 5/23/24 22:40, Comète wrote: >> >> Hello, >> I tried to install OpenBSD 7.5 on a new HP Elitebook 840 G10 (UEFI capable >> only) without success. >> It is stuck at boot on "entry point at 0x1001000". >> Even retried after a BIOS upgrade but no luck either. >> I tried with a snapshot install too with the same result. >> I post here what lspci returns from a debian bookworm: >> 00:00.0 Host bridge: Intel Corporation Device a706 >> 00:02.0 VGA compatible controller: Intel Corporation Raptor Lake-P [Iris Xe >> Graphics] (rev 04) >> 00:04.0 Signal processing controller: Intel Corporation Raptor Lake Dynamic >> Platform and Thermal >> Framework Processor Participant >> 00:06.0 PCI bridge: Intel Corporation Raptor Lake PCIe 4.0 Graphics Port >> 00:06.2 PCI bridge: Intel Corporation Device a73d >> 00:07.0 PCI bridge: Intel Corporation Raptor Lake-P Thunderbolt 4 PCI >> Express Root Port >> 00:07.2 PCI bridge: Intel Corporation Raptor Lake-P Thunderbolt 4 PCI >> Express Root Port >> 00:08.0 System peripheral: Intel Corporation GNA Scoring Accelerator module >> 00:0a.0 Signal processing controller: Intel Corporation Raptor Lake Crashlog >> and Telemetry (rev 01) >> 00:0d.0 USB controller: Intel Corporation Raptor Lake-P Thunderbolt 4 USB >> Controller >> 00:0d.2 USB controller: Intel Corporation Raptor Lake-P Thunderbolt 4 NHI >> 00:0d.3 USB controller: Intel Corporation Raptor Lake-P Thunderbolt 4 NHI >> 00:14.0 USB controller: Intel Corporation Alder Lake PCH USB 3.2 xHCI Host >> Controller (rev 01) >> 00:14.2 RAM memory: Intel Corporation Alder Lake PCH Shared SRAM (rev 01) >> 00:14.3 Network controller: Intel Corporation Raptor Lake PCH CNVi WiFi (rev >> 01) >> 00:15.0 Serial bus controller: Intel Corporation Alder Lake PCH Serial IO >> I2C Controller #0 (rev >> 01) >> 00:16.0 Communication controller: Intel Corporation Alder Lake PCH HECI >> Controller (rev 01) >> 00:16.3 Serial controller: Intel Corporation Alder Lake AMT SOL Redirection >> (rev 01) >> 00:1c.0 PCI bridge: Intel Corporation Alder Lake PCH-P PCI Express Root Port >> #9 (rev 01) >> 00:1e.0 Communication controller: Intel Corporation Alder Lake PCH UART #0 >> (rev 01) >> 00:1e.2 Serial bus controller: Intel Corporation Alder Lake SPI Controller >> (rev 01) >> 00:1f.0 ISA bridge: Intel Corporation Raptor Lake LPC/eSPI Controller (rev >> 01) >> 00:1f.3 Multimedia audio controller: Intel Corporation Raptor Lake-P/U/H >> cAVS (rev 01) >> 00:1f.4 SMBus: Intel Corporation Alder Lake PCH-P SMBus Host Controller (rev >> 01) >> 00:1f.5 Serial bus controller: Intel Corporation Alder Lake-P PCH SPI >> Controller (rev 01) >> 02:00.0 Non-Volatile memory controller: SK hynix BC901 NVMe Solid State >> Drive (DRAM-less) (rev 03) >> 57:00.0 Wireless controller [0d40]: Intel Corporation XMM7560 LTE Advanced >> Pro Modem (rev 01) >> Thanks for your help. >> Comete >> >> -- >> Aaron Mason - Programmer, open source addict >> I've taken my software vows - for beta or for worse
