I tried the previously suggested setups with veb(4) but couldn't get it to work, so I decided to start with simpler configurations to at least figure out how to use vlan(4).
These experiments, though, have also failed. I'm attempting to use vlan
with vmm but making a mistake somewhere. Networking without vlans
works, but as soon as I create vlans, it fails. Anyone able to provide
hints?
Here is the original working configuration:
First, the host/hypervisor:
# cat /etc/vm.conf
socket owner :vmdusers
switch "switch1" {
locked lladdr
interface bridge0
}
bsdiso="/home/iso/install75.iso"
vm "jrmu" {
owner jrmu
memory 2G
cdrom $bsdiso
disk /home/jrmu/jrmu.qcow2 format qcow2
interface tap1 {
locked lladdr e8:8b:27:7b:7a:02
switch "switch1"
}
}
# cat /etc/hostname.bridge0
add vether0
# cat /etc/hostname.vether0
inet 104.167.241.53 0xfffffff8
up
# cat /etc/hostname.em1
inet 104.167.241.211 0xffffffc0
inet6 2602:fccf:400:41::1 64
!route add -inet6 2602:fccf:400::1 -cloning -link -iface em1
!route add -inet6 default 2602:fccf:400::1
# ifconfig
lo0: flags=2008049<UP,LOOPBACK,RUNNING,MULTICAST,LRO> mtu 32768
index 4 priority 0 llprio 3
groups: lo
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
inet 127.0.0.1 netmask 0xff000000
em0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:25:90:5a:2d:93
index 1 priority 0 llprio 3
media: Ethernet autoselect (none)
status: no carrier
em1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:25:90:5a:2d:92
index 2 priority 0 llprio 3
groups: egress
media: Ethernet autoselect (1000baseT full-duplex,master)
status: active
inet 104.167.241.211 netmask 0xffffffc0 broadcast 104.167.241.255
inet6 fe80::225:90ff:fe5a:2d92%em1 prefixlen 64 scopeid 0x2
inet6 2602:fccf:400:41::1 prefixlen 64
enc0: flags=0<>
index 3 priority 0 llprio 3
groups: enc
status: active
bridge0: flags=41<UP,RUNNING> mtu 1500
description: switch1-switch1
index 5 llprio 3
groups: bridge
priority 32768 hellotime 2 fwddelay 15 maxage 20 holdcnt 6 proto rstp
tap1 flags=3<LEARNING,DISCOVER>
port 8 ifpriority 0 ifcost 0
vether0 flags=3<LEARNING,DISCOVER>
port 6 ifpriority 0 ifcost 0
vether0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
lladdr fe:e1:ba:d0:bc:f9
index 6 priority 0 llprio 3
groups: vether
media: Ethernet autoselect
status: active
inet 104.167.241.53 netmask 0xfffffff8 broadcast 104.167.241.55
pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33136
index 7 priority 0 llprio 3
groups: pflog
tap1: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
lladdr fe:e1:ba:d1:13:c3
description: vm1-if0-jrmu
index 8 priority 0 llprio 3
groups: tap
status: active
# route -n show -inet
Routing tables
Internet:
Destination Gateway Flags Refs Use Mtu Prio Iface
default 104.167.241.193 UGS 2 845 - 8 em1
224/4 127.0.0.1 URS 0 0 32768 8 lo0
47.103.216.95 104.167.241.193 UGHD 1 755 - L 8 em1
104.167.241.192/26 104.167.241.211 UCn 1 545 - 4 em1
104.167.241.48/29 104.167.241.53 UCn 6 0 - 4 vether0
104.167.241.48 link#6 UHLc 0 20 - 3 vether0
104.167.241.49 link#6 UHRLc 0 59 - 3 vether0
104.167.241.50 link#6 UHRLc 0 88 - 3 vether0
104.167.241.51 e8:8b:27:7b:7a:02 UHLc 0 183 - 3 vether0
104.167.241.52 link#6 UHRLc 0 64 - 3 vether0
104.167.241.53 fe:e1:ba:d0:db:10 UHLl 0 27 - 1 vether0
104.167.241.54 link#6 UHRLc 0 68 - 3 vether0
104.167.241.55 104.167.241.53 UHb 0 12 - 1 vether0
104.167.241.193 ac:1f:6b:fe:ca:98 UHLch 2 277 - 3 em1
104.167.241.211 00:25:90:5a:2d:92 UHLl 0 127 - 1 em1
104.167.241.255 104.167.241.211 UHb 0 61 - 1 em1
127/8 127.0.0.1 UGRS 0 0 32768 8 lo0
127.0.0.1 127.0.0.1 UHhl 2 280 32768 1 lo0
Inside the virtual machine:
jrmu# cat /etc/hostname.vio0
inet 104.167.241.51 0xfffffff8
up
jrmu# cat /etc/mygate
104.167.241.53
Connectivity works fine:
jrmu# ping 8.8.8.8
PING 8.8.8.8 (8.8.8.8): 56 data bytes
64 bytes from 8.8.8.8: icmp_seq=0 ttl=114 time=7.205 ms
64 bytes from 8.8.8.8: icmp_seq=1 ttl=114 time=7.272 ms
However, here is what I see after I setup vlans:
On the host/hypervisor:
# cat /etc/hostname.bridge0
add vlan2
# cat /etc/hostname.vlan2
inet 104.167.241.53 0xfffffff8
parent vether0 vnetid 100
up
# cat /etc/hostname.vether0
up
# ifconfig
lo0: flags=2008049<UP,LOOPBACK,RUNNING,MULTICAST,LRO> mtu 32768
index 4 priority 0 llprio 3
groups: lo
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
inet 127.0.0.1 netmask 0xff000000
em0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:25:90:5a:2d:93
index 1 priority 0 llprio 3
media: Ethernet autoselect (none)
status: no carrier
em1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:25:90:5a:2d:92
index 2 priority 0 llprio 3
groups: egress
media: Ethernet autoselect (1000baseT full-duplex,master)
status: active
inet 104.167.241.211 netmask 0xffffffc0 broadcast 104.167.241.255
inet6 fe80::225:90ff:fe5a:2d92%em1 prefixlen 64 scopeid 0x2
inet6 2602:fccf:400:41::1 prefixlen 64
enc0: flags=0<>
index 3 priority 0 llprio 3
groups: enc
status: active
bridge0: flags=41<UP,RUNNING> mtu 1500
description: switch1-switch1
index 5 llprio 3
groups: bridge
priority 32768 hellotime 2 fwddelay 15 maxage 20 holdcnt 6 proto rstp
tap1 flags=3<LEARNING,DISCOVER>
port 9 ifpriority 0 ifcost 0
vlan2 flags=3<LEARNING,DISCOVER>
port 7 ifpriority 0 ifcost 0
vether0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
lladdr fe:e1:ba:d0:90:ca
index 6 priority 0 llprio 3
groups: vether
media: Ethernet autoselect
status: active
vlan2: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
lladdr fe:e1:ba:d0:90:ca
index 7 priority 0 llprio 3
encap: vnetid 100 parent vether0 txprio packet rxprio outer
groups: vlan
media: Ethernet autoselect
status: active
pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33136
index 8 priority 0 llprio 3
groups: pflog
tap1: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
lladdr fe:e1:ba:d1:17:81
description: vm1-if0-jrmu
index 9 priority 0 llprio 3
groups: tap
status: active
# route -n show -inet
Routing tables
Internet:
Destination Gateway Flags Refs Use Mtu Prio Iface
default 104.167.241.193 UGS 8 3121 - 8 em1
224/4 127.0.0.1 URS 0 0 32768 8 lo0
104.167.241.192/26 104.167.241.211 UCn 1 1418 - 4 em1
104.167.241.193 ac:1f:6b:fe:ca:98 UHLch 2 716 - 3 em1
104.167.241.211 00:25:90:5a:2d:92 UHLl 0 386 - 1 em1
104.167.241.255 104.167.241.211 UHb 0 177 - 1 em1
127/8 127.0.0.1 UGRS 0 0 32768 8 lo0
127.0.0.1 127.0.0.1 UHhl 2 712 32768 1 lo0
172.56.232.16 104.167.241.193 UGHD 1 1019 - L 8 em1
Inside the virtual machine:
jrmu# cat /etc/hostname.vio0
up
jrmu# cat /etc/hostname.vlan0
inet 104.167.241.51 0xfffffff8
parent vio0 vnetid 100
up
jrmu# cat /etc/mygate
104.167.241.53
# ping 104.167.241.53
PING 104.167.241.53 (104.167.241.53): 56 data bytes
ping: sendmsg: Host is down
ping: wrote 104.167.241.53 64 chars, ret=-1
ping: sendmsg: Host is down
ping: wrote 104.167.241.53 64 chars, ret=-1
ping: sendmsg: Hostis down
On the host, I see the virtual machine has properly tagged packets with vnet
id 100:
# doas tcpdump -ne -i bridge0
tcpdump: listening on bridge0, link-type EN10MB
23:43:23.896206 e8:8b:27:7b:7a:02 ff:ff:ff:ff:ff:ff 8100 46: 802.1Q vid 100 pri
3 arp who-has 104.167.241.53 tell 104.167.241.51
23:43:24.906516 e8:8b:27:7b:7a:02 ff:ff:ff:ff:ff:ff 8100 46: 802.1Q vid 100 pri
3 arp who-has 104.167.241.53 tell 104.167.241.51
23:43:25.906509 e8:8b:27:7b:7a:02 ff:ff:ff:ff:ff:ff 8100 46: 802.1Q vid 100 pri
3 arp who-has 104.167.241.53 tell 104.167.241.51
23:43:26.906511 e8:8b:27:7b:7a:02 ff:ff:ff:ff:ff:ff 8100 46: 802.1Q vid 100 pri
3 arp who-has 104.167.241.53 tell 104.167.241.51
23:43:27.906509 e8:8b:27:7b:7a:02 ff:ff:ff:ff:ff:ff 8100 46: 802.1Q vid 100 pri
3 arp who-has 104.167.241.53 tell 104.167.241.51
--
jrmu
IRCNow (https://ircnow.org)
signature.asc
Description: PGP signature

