On Jul 22 15:22:21, h...@stare.cz wrote:
> I am trying to boot current/amd64 on this HP laptop from USB stick.
>
> Disabling the "secure boot" in BIOS, so that something else
> than the preinstalled windows is even allowed to boot,
> and choosing USB Flash Disk as the boot source,
> I see the usual
>
> Using drive 0, partition 3
>
> etc, up to
>
> boot>
>
> There, the rotating slash either stops and nothing else happens,
> or the machine reboots after the first number in
>
> booting hd0a:/bsd 12345678 + [reboot]
>
> This happens with both bsd and bsd.rd.
>
> The USB stick holds a full current/amd64 installation
> which I regularly boot on various amd64 machines,
> so I don;t suppose that is the problem.
FWIW, here is a dmesg of FreeBSD on the machine.
---<<BOOT>>---
Copyright (c) 1992-2023 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 14.1-RELEASE releng/14.1-n267679-10e31f0946d8 GENERIC amd64
FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git
llvmorg-18.1.5-0-g617a15a9eac9)
VT(vga): resolution 640x480
CPU: Intel(R) Core(TM) i5-4300U CPU @ 1.90GHz (2494.38-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x40651 Family=0x6 Model=0x45 Stepping=1
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x21<LAHF,ABM>
Structured Extended
Features=0x2fbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG>
XSAVE Features=0x1<XSAVEOPT>
VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 8589934592 (8192 MB)
avail memory = 8171106304 (7792 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <HPQOEM 1991 >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
arc4random: WARNING: initial seeding bypassed the cryptographic random device
because it was not yet seeded and the knob 'bypass_before_seeding' was enabled.
ioapic0 <Version 2.0> irqs 0-39
Launching APs: 1 2 3
random: entropy device external interface
kbd1 at kbdmux0
vtvga0: <VT VGA driver>
smbios0: <System Management BIOS> at iomem 0xf2fc0-0xf2fde
smbios0: Version: 2.7, BCD Revision: 2.7
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
acpi0: <HPQOEM SLIC-MPC>
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x6> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x3000-0x303f mem
0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
hdac0: <Intel Haswell HDA Controller> mem 0xd0730000-0xd0733fff irq 16 at
device 3.0 on pci0
xhci0: <Intel Panther Point USB 3.0 controller> mem 0xd0720000-0xd072ffff irq
16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
uart2: <Intel Lynx Point-LP HECI KT> port 0x30b0-0x30b7 mem
0xd073f000-0xd073ffff irq 19 at device 22.3 on pci0
uart2: Using 1 MSI message
em0: <Intel(R) I218-LM LPTLP> port 0x3080-0x309f mem
0xd0700000-0xd071ffff,0xd073e000-0xd073efff irq 20 at device 25.0 on pci0
em0: EEPROM V0.3-4
em0: Using 1024 TX descriptors and 1024 RX descriptors
em0: Using an MSI interrupt
em0: Ethernet address: 28:80:23:d8:c3:93
em0: netmap queues/slots: TX 1/1024, RX 1/1024
hdac1: <Intel Lynx Point-LP HDA Controller> mem 0xd0734000-0xd0737fff irq 22 at
device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <network> at device 0.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
pci3: <ACPI PCI bus> on pcib3
pci3: <unknown> at device 0.0 (no driver attached)
ehci0: <Intel Lynx Point-LP USB 2.0 controller> mem 0xd073d000-0xd073d3ff irq
17 at device 29.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Lynx Point-LP AHCI SATA controller> port
0x30a8-0x30af,0x30bc-0x30bf,0x30a0-0x30a7,0x30b8-0x30bb,0x3060-0x307f mem
0xd073c000-0xd073c7ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 2 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
acpi_tz2: <Thermal Zone> on acpi0
acpi_tz3: <Thermal Zone> on acpi0
acpi_tz4: <Thermal Zone> on acpi0
acpi_tz5: <Thermal Zone> on acpi0
acpi_tz6: <Thermal Zone> on acpi0
acpi_tz7: <Thermal Zone> on acpi0
acpi_syscontainer0: <System Container> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 15.0.
psm0: model Synaptics Touchpad, device ID 0
orm0: <ISA Option ROMs> at iomem 0xcf000-0xcffff,0xd0000-0xd0fff pnpid ORM0000
on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
Timecounter "TSC-low" frequency 1247113700 Hz quality 1000
Timecounters tick every 1.000 msec
hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0
hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0
pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 3 on hdaa0
ugen1.1: <Intel EHCI root HUB> at usbus1
ugen0.1: <Intel XHCI root HUB> at usbus0
hdacc1: <IDT 92HD91BXX HDA CODEC> at cad 0 on hdac1
hdaa1: <IDT 92HD91BXX Audio Function Group> at nid 1 on hdacc1
uhub0 on usbus0
uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
pcm1: <IDT 92HD91BXX (Analog 2.0+HP/2.0)> at nid 13,11 and 12,15 on hdaa1
random: unblocking device.
pcm2: <IDT 92HD91BXX (Analog)> at nid 10 and 17 on hdaa1
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <SanDisk SD7TB3Q-256G-1006 X2180306> ACS-2 ATA SATA 3.x device
ada0: Serial Number 152106406388
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 244198MB (500118192 512 byte sectors)
uhub1 on usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
Trying to mount root from ufs:/dev/ufs/FreeBSD_Install [ro,noatime]...
uhub0: 13 ports with 13 removable, self powered
Root mount waiting for: usbus0 usbus1
uhub1: 3 ports with 3 removable, self powered
Root mount waiting for: usbus0 usbus1
ugen1.2: <vendor 0x8087 product 0x8000> at usbus1
uhub2 on uhub1
uhub2: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on
usbus1
usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device General
USB Flash Disk (0x21c4:0x8005)
usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device
General USB Flash Disk (0x21c4:0x8005)
usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device
General USB Flash Disk (0x21c4:0x8005)
ugen0.2: <General USB Flash Disk> at usbus0
umass0 on uhub0
umass0: <General USB Flash Disk, class 0/0, rev 2.00/1.00, addr 1> on usbus0
umass0: SCSI over Bulk-Only; quirks = 0xc100
umass0:1:0: Attached to scbus1
da0 at umass-sim0 bus 0 scbus1 target 0 lun 0
da0: <General USB Flash Disk 1.00> Removable Direct Access SPC-2 SCSI device
da0: Serial Number 1312260000013102
da0: 40.000MB/s transfers
da0: 14916MB (30548048 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
uhub2: 8 ports with 8 removable, self powered
ugen0.3: <SMSC USB2134B> at usbus0
uhub3 on uhub0
uhub3: <SMSC USB2134B, class 9/0, rev 2.10/50.00, addr 2> on usbus0
uhub3: MTT enabled
uhub3: 2 ports with 2 removable, self powered
ugen0.4: <vendor 0x8087 product 0x07dc> at usbus0
Root mount waiting for: usbus0
ugen0.5: <Generic HP HD Webcam> at usbus0
ugen0.6: <SMSC USB5534B> at usbus0
uhub4 on uhub0
uhub4: <SMSC USB5534B, class 9/0, rev 3.00/50.00, addr 5> on usbus0
Root mount waiting for: usbus0
uhub4: 2 ports with 2 removable, self powered
Intel(R) Wireless WiFi based driver for FreeBSD
ichsmb0: <Intel Lynx Point-LP SMBus controller> port 0xef80-0xef9f mem
0xd0738000-0xd07380ff irq 18 at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
iwm0: <Intel(R) Dual Band Wireless AC 7260> mem 0xd0500000-0xd0501fff irq 19 at
device 0.0 on pci2
iwm0: hw rev 0x140, fw ver 17.352738.0, address 80:86:f2:ad:68:c1
rtsx0: <2.1g Realtek RTS5227 PCIe SD Card Reader> mem 0xd0400000-0xd0400fff irq
17 at device 0.0 on pci3
rtsx0: A card is detected
mmc0: <MMC/SD bus> on rtsx0
rtsx0: Controller timeout for CMD8
rtsx0: Controller timeout for CMD8
rtsx0: Controller timeout for CMD8
rtsx0: Controller timeout for CMD8
rtsx0: Controller timeout for CMD55
rtsx0: Controller timeout for CMD55
rtsx0: Controller timeout for CMD55
rtsx0: Controller timeout for CMD55
rtsx0: Controller timeout for CMD1
rtsx0: Controller timeout for CMD1
rtsx0: Controller timeout for CMD1
rtsx0: Controller timeout for CMD1
mmc0: No compatible cards found on bus
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: Embedded MOF found
ACPI: \134_SB.WMID.WQAB: 1 arguments were passed to a non-method ACPI object
(Buffer) (20221020/nsarguments-361)
em0: link state changed to UP
lo0: link state changed to UP
ugen0.4: <vendor 0x8087 product 0x07dc> at usbus0 (disconnected)
