Hi,
Running the latest snapshot (4th April).
Trying to connect a Belkin Wireless USB Network Adapter:
dmsg:
ural0: Belkin Components F5D7050 54g USB Network Adapter, rev 2.00/2.02,
addr 2
ural0: could not read MAC register: STALLED
ural0: could not read EEPROM: STALLED
ural0: could not read EEPROM: STALLED
ural0: could not read EEPROM: STALLED
ural0: could not read EEPROM: STALLED
ural0: could not read EEPROM: STALLED
ural0: MAC/BBP RT02 (rev 0x00), RF RT2522, address 00:00:00:00:00:00
ifconfig:
ural0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:00:00:00:00:00
media: IEEE802.11 autoselect
status: no network
ieee80211: nwid "" 100dBm
When trying to manually set the lladdr I get a lot of this messages:
ural0: could not read MAC register: STALLED
ural0: could not read MAC register: STALLED
ural0: could not read MAC register: STALLED
ural0: could not read MAC register: STALLED
ural0: timeout waiting for BBP/RF to wakeup
ural0: could not write MAC register: STALLED
ural0: could not write MAC register: STALLED
ural0: could not write MAC register: STALLED
Is this just an unsupported USB device or is there a workaround?
Regards
Johan Linnir
