Marco Would this work, LC/FC Duplex Multi Mode 5M Cable 2Gb/s to 1Gb/s device? http://cgi.ebay.com/LC-FC-Duplex-Multi-Mode-5M-Cable-2Gb-s-to-1Gb-s-device_W0QQitemZ9715347169QQcategoryZ3704QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
I've also asked my system / FC attached RAID enclosure if they could provide you one. thanks diana On Fri, 21 Apr 2006, Marco Peereboom wrote: > I don't have the magic cable to hook up my FC929 boards to my FC > enclosure. Anyone interested in donating an optical FC-LC cable? > > Diana Eichert wrote: > > Howdy > > > > I'm having a problem with an LSI929 FC card on a Tyan dual Opteron board. > > > > Here's the dmesg snippet specific to the 929 card: > > > > mpt2 at pci5 dev 9 function 0 "Symbios Logic FC929" rev 0x02: irq 10 > > mpt2: mpt_read_cfg_header: Config Info Status 22 > > mpt2: Could not retrieve Manufacturing Page 4 Header. > > mpt2: could not retrieve manufacturingpages > > mpt3 at pci5 dev 9 function 1 "Symbios Logic FC929" rev 0x02: irq 5 > > mpt3: mpt_read_cfg_header: Config Info Status 22 > > mpt3: Could not retrieve Manufacturing Page 4 Header. > > mpt3: could not retrieve manufacturingpages > > > > Reading the LSI Logic Fusion-MPT doc I see the error is related to not > > being able to read the Fusion-MPT Manufacturing Page 4. Well duh, that's > > exactly what the kernel message was. > > > > and follows is the entire dmesg. > > > > diana > > > > OpenBSD 3.9-current (GENERIC) #498: Sat Apr 1 23:23:33 MST 2006 > > [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC > > real mem = 3219873792 (3144408K) > > avail mem = 2758131712 (2693488K) > > using 22937 buffers containing 322195456 bytes (314644K) of memory > > mainbus0 (root) > > cpu0 at mainbus0: (uniprocessor) > > cpu0: AMD Opteron(tm) Processor 252, 2612.33 MHz > > cpu0: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW > > cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB > > 64b/line 16-way L2 cache > > cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative > > cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative > > pci0 at mainbus0 bus 0: configuration mode 1 > > "NVIDIA nForce4 DDR" rev 0xa3 at pci0 dev 0 function 0 not configured > > pcib0 at pci0 dev 1 function 0 "NVIDIA nForce4 ISA" rev 0xa3 > > nviic0 at pci0 dev 1 function 1 "NVIDIA nForce4 SMBus" rev 0xa2 > > iic0 at nviic0 > > iic1 at nviic0 > > ohci0 at pci0 dev 2 function 0 "NVIDIA nForce4 USB" rev 0xa2: irq 10, > > version 1.0, legacy support > > usb0 at ohci0: USB revision 1.0 > > uhub0 at usb0 > > uhub0: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1 > > uhub0: 10 ports with 10 removable, self powered > > ehci0 at pci0 dev 2 function 1 "NVIDIA nForce4 USB" rev 0xa3: irq 11 > > usb1 at ehci0: USB revision 2.0 > > uhub1 at usb1 > > uhub1: NVIDIA EHCI root hub, rev 2.00/1.00, addr 1 > > uhub1: 10 ports with 10 removable, self powered > > auich0 at pci0 dev 4 function 0 "NVIDIA nForce4 AC97" rev 0xa2: irq 10, > > nForce4 AC97 > > ac97: codec id 0x41445374 (Analog Devices AD1981B) > > ac97: codec features headphone, 20 bit DAC, No 3D Stereo > > audio0 at auich0 > > pciide0 at pci0 dev 6 function 0 "NVIDIA nForce4 IDE" rev 0xa2: DMA, > > channel 0 configured to compatibility, channel 1 configured to compatibility > > atapiscsi0 at pciide0 channel 0 drive 0 > > scsibus0 at atapiscsi0: 2 targets > > cd0 at scsibus0 targ 0 lun 0: <SONY, DVD RW DW-G120A, MYS2> SCSI0 5/cdrom > > removable cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4 > > pciide0: channel 1 disabled (no drives) > > pciide1 at pci0 dev 7 function 0 "NVIDIA nForce4 SATA" rev 0xa3: DMA > > pciide1: using irq 10 for native-PCI interrupt > > pciide2 at pci0 dev 8 function 0 "NVIDIA nForce4 SATA" rev 0xa3: DMA > > pciide2: using irq 11 for native-PCI interrupt > > ppb0 at pci0 dev 9 function 0 "NVIDIA nForce4 PCI-PCI" rev 0xa2 > > pci1 at ppb0 bus 1 > > vga1 at pci1 dev 4 function 0 "NVIDIA GeForce2 MX" rev 0xb2 > > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > > "Texas Instruments TSB43AB22 FireWire" rev 0x00 at pci1 dev 5 function 0 > > not configured > > nfe0 at pci0 dev 10 function 0 "NVIDIA CK804 LAN" rev 0xa3: irq 11, address > > 00:e0:81:57:06:7e > > eephy0 at nfe0 phy 1: Marvell 88E1111 Gigabit PHY, rev. 1 > > ppb1 at pci0 dev 14 function 0 "NVIDIA nForce4 PCIE" rev 0xa3 > > pci2 at ppb1 bus 2 > > pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00 > > pci3 at pchb0 bus 8 > > ppb2 at pci3 dev 10 function 0 "AMD 8131 PCIX" rev 0x12 > > pci4 at ppb2 bus 9 > > "AMD 8131 PCIX IOAPIC" rev 0x01 at pci3 dev 10 function 1 not configured > > ppb3 at pci3 dev 11 function 0 "AMD 8131 PCIX" rev 0x12 > > pci5 at ppb3 bus 10 > > mpt0 at pci5 dev 6 function 0 "Symbios Logic 53c1030" rev 0x07: irq 5 > > scsibus1 at mpt0: 16 targets > > sd0 at scsibus1 targ 0 lun 0: <SEAGATE, ST373207LW, 0004> SCSI3 0/direct > > fixed > > sd0: 70007MB, 90774 cyl, 2 head, 789 sec, 512 bytes/sec, 143374744 sec total > > mpt0: target 0 Synchronous at 160MHz width 16bit offset 63 QAS 1 DT 1 IU 1 > > mpt1 at pci5 dev 6 function 1 "Symbios Logic 53c1030" rev 0x07: irq 11 > > scsibus2 at mpt1: 16 targets > > mpt2 at pci5 dev 9 function 0 "Symbios Logic FC929" rev 0x02: irq 10 > > mpt2: mpt_read_cfg_header: Config Info Status 22 > > mpt2: Could not retrieve Manufacturing Page 4 Header. > > mpt2: could not retrieve manufacturingpages > > mpt3 at pci5 dev 9 function 1 "Symbios Logic FC929" rev 0x02: irq 5 > > mpt3: mpt_read_cfg_header: Config Info Status 22 > > mpt3: Could not retrieve Manufacturing Page 4 Header. > > mpt3: could not retrieve manufacturingpages > > "AMD 8131 PCIX IOAPIC" rev 0x01 at pci3 dev 11 function 1 not configured > > pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00 > > pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00 > > pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00 > > pchb4 at pci0 dev 25 function 0 "AMD AMD64 HyperTransport" rev 0x00 > > pci6 at pchb4 bus 128 > > "NVIDIA nForce4 DDR" rev 0xa3 at pci6 dev 0 function 0 not configured > > vendor "NVIDIA", unknown product 0x00d3 (class memory subclass > > miscellaneous, rev 0xa3) at pci6 dev 1 function 0 not configured > > nfe1 at pci6 dev 10 function 0 "NVIDIA CK804 LAN" rev 0xa3: irq 5, address > > 00:e0:81:57:06:7f > > eephy1 at nfe1 phy 1: Marvell 88E1111 Gigabit PHY, rev. 1 > > ppb4 at pci6 dev 14 function 0 "NVIDIA nForce4 PCIE" rev 0xa3 > > pci7 at ppb4 bus 129 > > pchb5 at pci0 dev 25 function 1 "AMD AMD64 Address Map" rev 0x00 > > pchb6 at pci0 dev 25 function 2 "AMD AMD64 DRAM Cfg" rev 0x00 > > pchb7 at pci0 dev 25 function 3 "AMD AMD64 Misc Cfg" rev 0x00 > > isa0 at pcib0 > > isadma0 at isa0 > > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > > pckbc0 at isa0 port 0x60/5 > > pckbd0 at pckbc0 (kbd slot) > > pckbc0: using irq 1 for kbd slot > > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > > pmsi0 at pckbc0 (aux slot) > > pckbc0: using irq 12 for aux slot > > wsmouse0 at pmsi0 mux 0 > > pcppi0 at isa0 port 0x61 > > midi0 at pcppi0: <PC speaker> > > spkr0 at pcppi0 > > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 > > fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec > > dkcsum: sd0 matches BIOS drive 0x80 > > root on sd0a > > rootdev=0x400 rrootdev=0xd00 rawdev=0xd02