Anyone else get these errors with the nfe driver? Not really sure what
to do to troubleshoot the problem. This seems to happen during heavy
traffic times.
nfe0: tx v1 error 0x6001
nfe0: watchdog timeout
nfe0: tx v1 error 0x6001
nfe0: tx v1 error 0x6001
Here's my dmesg if it helps...
dmesg
OpenBSD 3.9-current (GENERIC) #695: Mon Apr 17 14:37:08 MDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon(tm) XP 2600+ ("AuthenticAMD" 686-class, 256KB L2 cache)
2.09 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,
MMX,FXSR,SSE
real mem = 536375296 (523804K)
avail mem = 482394112 (471088K)
using 4278 buffers containing 26923008 bytes (26292K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(23) BIOS, date 05/14/03, BIOS32 rev. 0 @
0xfb490
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdf84
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdeb0/208 (11 entries)
pcibios0: PCI Exclusive IRQs: 5 11
pcibios0: no compatible PCI ICU found
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0xa000 0xcc000/0x4000! 0xd0000/0x1800
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "NVIDIA nForce2 PCI" rev 0xa2
"NVIDIA nForce2" rev 0xa2 at pci0 dev 0 function 1 not configured
"NVIDIA nForce2" rev 0xa2 at pci0 dev 0 function 2 not configured
"NVIDIA nForce2" rev 0xa2 at pci0 dev 0 function 3 not configured
"NVIDIA nForce2" rev 0xa2 at pci0 dev 0 function 4 not configured
"NVIDIA nForce2" rev 0xa2 at pci0 dev 0 function 5 not configured
pcib0 at pci0 dev 1 function 0 "NVIDIA nForce2 ISA" rev 0xa3
nviic0 at pci0 dev 1 function 1 "NVIDIA nForce2 SMBus" rev 0xa2
iic0 at nviic0
iic1 at nviic0
asbtm0 at iic1 addr 0x2d
wbenv0 at iic1 addr 0x2e: W83L784TS-L
ohci0 at pci0 dev 2 function 0 "NVIDIA nForce2 USB" rev 0xa3: irq 11,
version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci0 dev 2 function 1 "NVIDIA nForce2 USB" rev 0xa3: irq 5,
version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ehci0 at pci0 dev 2 function 2 "NVIDIA nForce2 USB" rev 0xa3: irq 11
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: NVIDIA EHCI root hub, rev 2.00/1.00, addr 1
uhub2: 6 ports with 6 removable, self powered
nfe0 at pci0 dev 4 function 0 "NVIDIA nForce2 LAN" rev 0xa1: irq 11,
address 00:e0:18:db:d5:96
rlphy0 at nfe0 phy 1: RTL8201L 10/100 PHY, rev. 1
auich0 at pci0 dev 6 function 0 "NVIDIA nForce2 AC97" rev 0xa1: irq 5,
nForce2 AC97
ac97: codec id 0x414c4720 (Avance Logic ALC650)
ac97: codec features 20 bit DAC, 18 bit ADC, Realtek 3D
audio0 at auich0
ppb0 at pci0 dev 8 function 0 "NVIDIA nForce2 PCI-PCI" rev 0xa3
pci1 at ppb0 bus 1
dc0 at pci1 dev 6 function 0 "Lite-On PNIC" rev 0x20: irq 11, address
00:a0:cc:22:cd:f6
mtdphy0 at dc0 phy 1: MTD972 10/100 PHY, rev. 8
em0 at pci1 dev 7 function 0 "Intel PRO/1000 (82542)" rev 0x03: irq 5,
address 00:03:47:08:f1:b5
ral0 at pci1 dev 8 function 0 "Ralink RT2560" rev 0x01: irq 11, address
00:14:85:b6:5c:8e
ral0: MAC/BBP RT2560 (rev 0x04), RF RT2525
xl0 at pci1 dev 9 function 0 "3Com 3c905B 100Base-TX" rev 0x24: irq 5,
address 00:50:04:05:44:be
exphy0 at xl0 phy 24: 3Com internal media interface
fxp0 at pci1 dev 10 function 0 "Intel 8255x" rev 0x02, i82557: irq 11,
address 00:a0:c9:d8:1c:f1
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 0
pciide0 at pci0 dev 9 function 0 "NVIDIA nForce2 IDE" rev 0xa2: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD400BB-00CAA0>
wd0: 16-sector PIO, LBA, 38166MB, 78165360 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MITSUMI, CD-ROM FX54++W, U01L> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 0
ppb1 at pci0 dev 30 function 0 "NVIDIA nForce2 AGP" rev 0xa2
pci2 at ppb1 bus 2
vga1 at pci2 dev 0 function 0 "NVIDIA GeForce2 MX" rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ff65 netmask ff65 ttymask ffe7
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
dc0: failed to force tx and rx to idle state
nfe0: tx v1 error 0x6001
nfe0: watchdog timeout
nfe0: tx v1 error 0x6001
nfe0: tx v1 error 0x6001
