I had a machine crash which runs syslog-ng and takes syslog for some heavily-loaded firewalls. Over the weekend, we saw the machine crash on two ocassions. I believe there may be a bad hard disk in this host as well.
This is a Dell 2850. We have several in production that work without problem. See the following... # disklabel sd3 disklabel: /dev/rsd3c: Device not configured Here's a dmesg...see the last few lines. Any insight is appreciated. WARNING: terminal is not fully functional OpenBSD 3.9 (GENERIC) #617: Thu Mar 2 02:26:48 MST 2006 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel(R) Xeon(TM) CPU 3.40GHz ("GenuineIntel" 686-class) 3.40 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF LUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,EST,CNXT-ID cpu0: Enhanced SpeedStep disabled by BIOS real mem = 1073065984 (1047916K) avail mem = 972435456 (949644K) using 4278 buffers containing 53755904 bytes (52496K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+(00) BIOS, date 09/22/05, BIOS32 rev. 0 @ 0xffe90 pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfb600/320 (18 entries) pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801EB/ER LPC" rev 0x00) pcibios0: PCI bus #9 is the last bus bios0: ROM list: 0xc0000/0xb000! 0xcb000/0x4000 0xec000/0x4000! ipmi0 at mainbus0: version 1.5 interface KCS iobase 0xca8/8 spacing 4 cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "Intel E7520 MCH" rev 0x09 ppb0 at pci0 dev 2 function 0 "Intel MCH PCIE" rev 0x09 pci1 at ppb0 bus 1 ppb1 at pci1 dev 0 function 0 "Intel IOP331 Channel 0" rev 0x06 pci2 at ppb1 bus 2 mpt0 at pci2 dev 5 function 0 "Symbios Logic 53c1030" rev 0x08: irq 7 scsibus0 at mpt0: 16 targets sd0 at scsibus0 targ 0 lun 0: <SEAGATE, ST336754LC, D403> SCSI3 0/direct fixed sd0: 34732MB, 50824 cyl, 2 head, 699 sec, 512 bytes/sec, 71132959 sec total sd1 at scsibus0 targ 1 lun 0: <SEAGATE, ST336754LC, D403> SCSI3 0/direct fixed sd1: 34732MB, 50824 cyl, 2 head, 699 sec, 512 bytes/sec, 71132959 sec total sd2 at scsibus0 targ 2 lun 0: <MAXTOR, ATLAS15K2_146SCA, JNZY> SCSI3 0/direct fi xed sd2: 140014MB, 48242 cyl, 8 head, 742 sec, 512 bytes/sec, 286749480 sec total sd3 at scsibus0 targ 6 lun 0: <, , > SCSI0 0/direct fixed sd3: drive offline mpt0: target 0 Synchronous at 160MHz width 16bit offset 63 QAS 0 DT 1 IU 1 mpt0: target 1 Synchronous at 160MHz width 16bit offset 63 QAS 0 DT 1 IU 1 mpt0: target 2 Synchronous at 160MHz width 16bit offset 127 QAS 0 DT 1 IU 1 mpt0: target 6 Asynchronous at 0MHz width 8bit offset 0 QAS 0 DT 0 IU 0 mpt1 at pci2 dev 5 function 1 "Symbios Logic 53c1030" rev 0x08: irq 5 scsibus1 at mpt1: 16 targets ppb2 at pci1 dev 0 function 2 "Intel IOP331 Channel 1" rev 0x06 pci3 at ppb2 bus 3 ppb3 at pci0 dev 4 function 0 "Intel MCH PCIE" rev 0x09 pci4 at ppb3 bus 4 ppb4 at pci0 dev 5 function 0 "Intel MCH PCIE" rev 0x09 pci5 at ppb4 bus 5 ppb5 at pci5 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09 pci6 at ppb5 bus 6 em0 at pci6 dev 7 function 0 "Intel PRO/1000MT (82541GI)" rev 0x05: irq 11, addr ess 00:14:22:21:70:1c ppb6 at pci5 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09 pci7 at ppb6 bus 7 em1 at pci7 dev 8 function 0 "Intel PRO/1000MT (82541GI)" rev 0x05: irq 5, addre ss 00:14:22:21:70:1d ppb7 at pci0 dev 6 function 0 "Intel MCH PCIE" rev 0x09 pci8 at ppb7 bus 8 uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: irq 11 usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: irq 10 usb1 at uhci1: USB revision 1.0 uhub1 at usb1 uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2 at pci0 dev 29 function 2 "Intel 82801EB/ER USB" rev 0x02: irq 7 usb2 at uhci2: USB revision 1.0 uhub2 at usb2 uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: irq 6 usb3 at ehci0: USB revision 2.0 uhub3 at usb3 uhub3: Intel EHCI root hub, rev 2.00/1.00, addr 1 uhub3: 6 ports with 6 removable, self powered ppb8 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xc2 pci9 at ppb8 bus 9 vga1 at pci9 dev 13 function 0 "ATI Radeon VE QY" rev 0x00 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02 pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility atapiscsi0 at pciide0 channel 0 drive 0 scsibus2 at atapiscsi0: 2 targets cd0 at scsibus2 targ 0 lun 0: <TSSTcorp, CDRW/DVD TSL462C, DE01> SCSI0 5/cdrom r emovable cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 disabled (no drives) isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 npx0 at isa0 port 0xf0/16: using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pccom0: console biomask ffed netmask ffed ttymask ffef pctr: user-level cycle counter enabled uhub4 at uhub3 port 3 uhub4: Dell product 0xa001, rev 2.00/0.00, addr 2 uhub4: 2 ports with 2 removable, self powered, multiple transaction translators dkcsum: sd0 matches BIOS drive 0x80 dkcsum: sd1 matches BIOS drive 0x81 dkcsum: sd2 matches BIOS drive 0x82 root on sd0a rootdev=0x400 rrootdev=0xd00 rawdev=0xd02 sd3(mpt0:6:0): Check Condition (error 0x70) on opcode 0x25 SENSE KEY: Illegal Request ASC/ASCQ: No Additional Sense Information sd3(mpt0:6:0): Check Condition (error 0x70) on opcode 0x25 SENSE KEY: Illegal Request ASC/ASCQ: No Additional Sense Information ddb> trace Debugger(609,d18a5000,d7d393e8,d8343820,0) at Debugger+0x4 panic(d052d0a0,6fdecb0,4000,608,2615) at panic+0x63 ffs_reallocblks(eb145c98,2b,0,4000,d05a76e0) at ffs_reallocblks+0x4c7 VOP_REALLOCBLKS(d7b6e750,d18a6b80,d7dafe80,2615) at VOP_REALLOCBLKS+0x28 cluster_write(d7dafe80,d7b6d578,9858000,0,eb145de8) at cluster_write+0x209 ffs_write(eb145e08,d7b6e750,30042,d7b8de18,d05a70e0) at ffs_write+0x552 VOP_WRITE(d7b6e750,eb145e98,13,d7d2b000,d7b6e750,20002,d7b8de18,2) at VOP_WRITE +0x34 vn_write(d7d0e3c0,d7d0e3dc,eb145e98,d7d2b000) at vn_write+0x89 dofilewrite(d7b8de18,4,d7d0e3c0,cfbe2440,1000) at dofilewrite+0x6d sys_write(d7b8de18,eb145f68,eb145f58,0,d7ae6700) at sys_write+0x47 syscall() at syscall+0x2ea --- syscall (number 4) --- 0x2fce9d9: ddb> ps PID PPID PGRP UID S FLAGS WAIT COMMAND 3525 1 3525 0 3 0x4086 ttyin getty 5765 1 5765 0 3 0x4086 ttyin getty 31376 1 31376 0 3 0x84 select cron *25918 1 25918 0 7 0x4 syslog-ng 8404 1 27708 0 3 0x84 bpf arpwatch 20822 1 20822 0 3 0x40184 select sendmail 16450 1 27708 0 3 0x84 bpf arpwatch 24507 1 24507 0 3 0x84 select sshd 9832 1 9832 0 3 0x184 select inetd 31155 0 0 0 3 0x100204 acct acct 24279 1 24279 0 3 0x84 poll ntpd 16076 1 27708 83 3 0x186 poll ntpd 7741 19777 19777 74 3 0x184 bpf pflogd 19777 1 19777 0 3 0x84 netio pflogd 11128 14090 14090 73 2 0x184 syslogd 14090 1 14090 0 3 0x84 netio syslogd 4250 1 4250 0 3 0x84 mfsidl mount_mfs 15 0 0 0 3 0x100204 crypto_wa crypto 14 0 0 0 3 0x100204 aiodoned aiodoned 13 0 0 0 3 0x100204 syncer update 12 0 0 0 3 0x100204 cleaner cleaner 11 0 0 0 3 0x100204 reaper reaper 10 0 0 0 3 0x100204 pgdaemon pagedaemon 9 0 0 0 3 0x100204 pftm pfpurge 8 0 0 0 3 0x100204 usbevt usb3 7 0 0 0 3 0x100204 usbevt usb2 6 0 0 0 3 0x100204 usbevt usb1 5 0 0 0 3 0x100204 usbtsk usbtask 4 0 0 0 3 0x100204 usbevt usb0 3 0 0 0 2 0x100204 ipmi0 2 0 0 0 3 0x100204 kmalloc kmthread 1 0 1 0 3 0x4084 wait init 0 -1 0 0 3 0x80204 scheduler swapper ddb>