Hi there too,

I am having the exact same error, buy my ichiic0 is "Intel 82801FB SMBus"
and i have only one processor. Note that my kernel is GENERIC, not
GENERIC.MP .
I've also tried disabling hyperthreading at the bios, but the errors still
show up.

Regards,
Marcos Laufer

Oh, here is my dmesg info:

OpenBSD 3.9-stable (GENERIC) #3: Sun May  7 16:52:26 ART 2006
    [EMAIL PROTECTED]:/u/system/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 3.00GHz ("GenuineIntel" 686-class) 3 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLU
SH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,EST,CNXT-ID
cpu0: Enhanced SpeedStep 1500 MHz (1420 mV): unknown EST cpu, no changes
possible
real mem  = 1064079360 (1039140K)
avail mem = 964218880 (941620K)
using 4278 buffers containing 53305344 bytes (52056K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 04/29/05
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios at bios0 function 0x1a not configured
bios0: ROM list: 0xc0000/0xaa00!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82915G/P/GV Host" rev 0x04
ppb0 at pci0 dev 1 function 0 "Intel 82915G/P/GV PCIE" rev 0x04
pci1 at ppb0 bus 1
vga1 at pci0 dev 2 function 0 "Intel 82915G/P/GV Video" rev 0x04: aperture
at 0xff480000, size 0x10000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x03
pci2 at ppb1 bus 5
ppb2 at pci0 dev 28 function 1 "Intel 82801FB PCIE" rev 0x03
pci3 at ppb2 bus 4
ppb3 at pci0 dev 28 function 2 "Intel 82801FB PCIE" rev 0x03
pci4 at ppb3 bus 3
ppb4 at pci0 dev 28 function 3 "Intel 82801FB PCIE" rev 0x03
pci5 at ppb4 bus 2
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: irq 5
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: irq 9
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: irq 11
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ppb5 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xd3
pci6 at ppb5 bus 6
fxp0 at pci6 dev 8 function 0 "Intel 82801FB LAN" rev 0x01, i82562: irq 12,
address 00:16:76:23:ed:6a
inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801FB LPC" rev 0x03: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801FB IDE" rev 0x03: DMA, channel
0 configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 31 function 2 "Intel 82801FB SATA" rev 0x03: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using irq 10 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <SAMSUNG HD080HJ>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1 at pciide1 channel 1 drive 0: <SAMSUNG HD080HJ>
wd1: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd1(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x03: irq 10
iic0 at ichiic0
adt0 at iic0 addr 0x2e: emc6d10x (ADT7460) rev 68
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
biomask effd netmask fffd ttymask ffff
pctr: user-level cycle counter enabled
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: wd1 matches BIOS drive 0x81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
ichiic0: timeout, status 0x0
ichiic0: transaction abort failed, status 0x40<INUSE>
ichiic0: timeout, status 0x0
ichiic0: transaction abort failed, status 0x40<INUSE>
ichiic0: timeout, status 0x0
ichiic0: transaction abort failed, status 0x40<INUSE>
ichiic0: timeout, status 0x0
ichiic0: transaction abort failed, status 0x0
ichiic0: timeout, status 0x0
ichiic0: transaction abort failed, status 0x0



---
Departamento de Soporte Tecnico
www.ipv4networks.com  InternetWorking Solutions
Av. Dr. Honorio Pueyrredon 1694
Tel: (05411) - 0800-444-HOSTING (4678)

----- Original Message ----- 
From: "Shane Harbour" <[EMAIL PROTECTED]>
To: <misc@openbsd.org>
Sent: Saturday, July 08, 2006 3:14 PM
Subject: SMP and ichiic Error


Hello all,
I'm having the following error on my SMP system:

    ichiic0: timeout, status 0x0
    ichiic0: transaction abort failed, status 0x40<INUSE>

    (ichiic0 = Intel 82801CA/SMBus)

Everything I have found in the archives points to a hyperthreading
issue.  When the issue first appeared, HT was turned off.  I've also
tried changing the MP Spec in the BIOS.  I've tried the following 4 combos:

    MP Spec: 1.1/HT: Off
    MP Spec: 1.1/HT: On
    MP Spec: 1.4/HT: Off
    MP Spec: 1.4/HT: On

No matter the combo, I still get the same error.  I would prefer not to
disable ichiic* in the kernel config, but will do so if necessary.
Below is a dmesg from the system (MP Spec: 1.4/HT: Off) with MPVERBOSE
set in the kernel config.  I'm hoping I just missed something and that
it is easily corrected.

Thanks for your help,
Shane

OpenBSD 3.9-stable (GENERIC.MP) #2: Sat Jul  8 17:54:58 MDT 2006

[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) XEON(TM) CPU 1.80GHz ("GenuineIntel" 686-class) 1.80 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLU
SH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM
real mem  = 1073258496 (1048104K)
avail mem = 972566528 (949772K)
using 4278 buffers containing 53764096 bytes (52504K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(8a) BIOS, date 10/02/02, BIOS32 rev. 0 @ 0xfb1b0
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdf84
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfde70/272 (15 entries)
pcibios0: PCI Exclusive IRQs: 5 10 11 12
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371SB ISA" rev 0x00)
pcibios0: PCI bus #4 is the last bus
bios0: ROM list: 0xc0000/0xa800 0xcc000/0x1800 0xce000/0x6600
mainbus0: scanning 0x9f800 to 0x9fbf0 for MP signature
mainbus0: scanning 0xf0000 to 0xffff0 for MP signature
mainbus0: MP floating pointer found in bios at 0xf4f00
mainbus0: MP config table at 0xf1400, 332 bytes long
mainbus0: Intel MP Specification (Version 1.4) (OEM00000 PROD00000000)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: calibrating local timer
cpu0: apic clock running at 99 MHz
cpu0: kstack at 0xe9059000 for 8192 bytes
cpu0: idle pcb at 0xe9059000, idle sp at 0xe905af98
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) XEON(TM) CPU 1.80GHz ("GenuineIntel" 686-class) 1.80 GHz
cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV
cpu1: kstack at 0xe905b000 for 8192 bytes
cpu1: idle pcb at 0xe905b000, idle sp at 0xe905cf98
mainbus0: bus 0 is type PCI
mainbus0: bus 1 is type PCI
mainbus0: bus 2 is type PCI
mainbus0: bus 3 is type PCI
mainbus0: bus 4 is type PCI
mainbus0: bus 5 is type ISA
ioapic0 at mainbus0: apid 4 pa 0xfec00000, virtual wire mode, version 20, 24
pins
ioapic1 at mainbus0: apid 5 pa 0xfec80000, virtual wire mode, version 20, 24
pins
ioapic2 at mainbus0: apid 6 pa 0xfec80400, virtual wire mode, version 20, 24
pins
ioapic0: int17 attached to pci0 device 31 INT_B (type 0x0 flags 0xf)
ioapic0: int19 attached to pci0 device 29 INT_B (type 0x0 flags 0xf)
ioapic0: int16 attached to pci0 device 29 INT_A (type 0x0 flags 0xf)
ioapic0: int19 attached to pci4 device 5 INT_A (type 0x0 flags 0xf)
ioapic2: int0 attached to pci2 device 9 INT_A (type 0x0 flags 0xf)
ioapic0: int18 attached to pci4 device 4 INT_A (type 0x0 flags 0xf)
ioapic0: int16 attached to pci4 device 6 INT_A (type 0x0 flags 0xf)
ioapic0: int16 attached to pci0 device 31 INT_A (type 0x0 flags 0xf)
ioapic0: int0 attached to ExtINT (type 0x3 flags 0x0)
ioapic0: int1 attached to isa0 irq 1 (type 0x0 flags 0x0)
ioapic0: int2 attached to isa0 irq 0 (type 0x0 flags 0x0)
ioapic0: int3 attached to isa0 irq 3 (type 0x0 flags 0x0)
ioapic0: int4 attached to isa0 irq 4 (type 0x0 flags 0x0)
ioapic0: int6 attached to isa0 irq 6 (type 0x0 flags 0x0)
ioapic0: int7 attached to isa0 irq 7 (type 0x0 flags 0x0)
ioapic0: int8 attached to isa0 irq 8 (type 0x0 flags 0x5)
ioapic0: int9 attached to isa0 irq 9 (type 0x0 flags 0x0)
ioapic0: int13 attached to isa0 irq 13 (type 0x0 flags 0x0)
ioapic0: int14 attached to isa0 irq 14 (type 0x0 flags 0x0)
ioapic0: int15 attached to isa0 irq 15 (type 0x0 flags 0x0)
local apic: int0 attached to ExtINT (type 0x3 flags 0x0)
local apic: int1 attached to NMI (type 0x1 flags 0x0)
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel E7500 MCH Host" rev 0x03
ppb0 at pci0 dev 2 function 0 "Intel E7500 MCH" rev 0x03
pci1 at ppb0 bus 1
"Intel 82870P2 IOxAPIC" rev 0x04 at pci1 dev 28 function 0 not configured
ppb1 at pci1 dev 29 function 0 "Intel 82870P2 PCI-PCI" rev 0x04
pci2 at ppb1 bus 2
em0 at pci2 dev 9 function 0 "Intel PRO/1000XT (82544GC)" rev 0x02: apic 6
int 0 (irq 12), address 00:10:dc:f4:d5:a8
"Intel 82870P2 IOxAPIC" rev 0x04 at pci1 dev 30 function 0 not configured
ppb2 at pci1 dev 31 function 0 "Intel 82870P2 PCI-PCI" rev 0x04
pci3 at ppb2 bus 3
uhci0 at pci0 dev 29 function 0 "Intel 82801CA/CAM USB" rev 0x02: apic 4 int
16 (irq 11)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801CA/CAM USB" rev 0x02: apic 4 int
19 (irq 5)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ppb3 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x42
pci4 at ppb3 bus 4
fxp0 at pci4 dev 4 function 0 "Intel 8255x" rev 0x0c, i82550: apic 4 int 18
(irq 10), address 00:10:dc:f4:d5:a9
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
vga1 at pci4 dev 5 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ahc0 at pci4 dev 6 function 0 "Adaptec AHA-29160 U160" rev 0x02: apic 4 int
16 (irq 11)
scsibus0 at ahc0: 16 targets
sd0 at scsibus0 targ 1 lun 0: <MAXTOR, ATLASU320_73_WLS, B430> SCSI3
0/direct fixed
sd0: 69464MB, 31022 cyl, 8 head, 573 sec, 512 bytes/sec, 142264000 sec total
sd1 at scsibus0 targ 2 lun 0: <MAXTOR, ATLASU320_73_WLS, B430> SCSI3
0/direct fixed
sd1: 69464MB, 31022 cyl, 8 head, 573 sec, 512 bytes/sec, 142264000 sec total
ichpcib0 at pci0 dev 31 function 0 "Intel 82801CA LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801CA IDE" rev 0x02: DMA, channel
0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <LITEON, DVD-ROM LTD163D, GHR3> SCSI0 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
ichiic0 at pci0 dev 31 function 3 "Intel 82801CA/CAM SMBus" rev 0x02: apic 4
int 17 (irq 12)
iic0 at ichiic0
admtemp0 at iic0 addr 0x18: adm1021
lm1 at iic0 addr 0x2d: W83782D
admtemp1 at iic0 addr 0x4c: Xeon
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
lm0 at isa0 port 0x290/8: W83627HF
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask 0 netmask 0 ttymask 0
ioapic2: enabling
ioapic2: int0 0xa050 0x0
ioapic2: int1 0x10000 0x0
ioapic2: int2 0x10000 0x0
ioapic2: int3 0x10000 0x0
ioapic2: int4 0x10000 0x0
ioapic2: int5 0x10000 0x0
ioapic2: int6 0x10000 0x0
ioapic2: int7 0x10000 0x0
ioapic2: int8 0x10000 0x0
ioapic2: int9 0x10000 0x0
ioapic2: int10 0x10000 0x0
ioapic2: int11 0x10000 0x0
ioapic2: int12 0x10000 0x0
ioapic2: int13 0x10000 0x0
ioapic2: int14 0x10000 0x0
ioapic2: int15 0x10000 0x0
ioapic2: int16 0x10000 0x0
ioapic2: int17 0x10000 0x0
ioapic2: int18 0x10000 0x0
ioapic2: int19 0x10000 0x0
ioapic2: int20 0x10000 0x0
ioapic2: int21 0x10000 0x0
ioapic2: int22 0x10000 0x0
ioapic2: int23 0x10000 0x0
ioapic1: enabling
ioapic1: int0 0x10000 0x0
ioapic1: int1 0x10000 0x0
ioapic1: int2 0x10000 0x0
ioapic1: int3 0x10000 0x0
ioapic1: int4 0x10000 0x0
ioapic1: int5 0x10000 0x0
ioapic1: int6 0x10000 0x0
ioapic1: int7 0x10000 0x0
ioapic1: int8 0x10000 0x0
ioapic1: int9 0x10000 0x0
ioapic1: int10 0x10000 0x0
ioapic1: int11 0x10000 0x0
ioapic1: int12 0x10000 0x0
ioapic1: int13 0x10000 0x0
ioapic1: int14 0x10000 0x0
ioapic1: int15 0x10000 0x0
ioapic1: int16 0x10000 0x0
ioapic1: int17 0x10000 0x0
ioapic1: int18 0x10000 0x0
ioapic1: int19 0x10000 0x0
ioapic1: int20 0x10000 0x0
ioapic1: int21 0x10000 0x0
ioapic1: int22 0x10000 0x0
ioapic1: int23 0x10000 0x0
ioapic0: enabling
ioapic0: int0 0x10700 0x0
ioapic0: int1 0x70 0x0
ioapic0: int2 0x10100 0x0
ioapic0: int3 0xb0 0x0
ioapic0: int4 0xb1 0x0
ioapic0: int5 0x10000 0x0
ioapic0: int6 0x40 0x0
ioapic0: int7 0x71 0x0
ioapic0: int8 0x10100 0x0
ioapic0: int9 0x10100 0x0
ioapic0: int10 0x10000 0x0
ioapic0: int11 0x10000 0x0
ioapic0: int12 0x10000 0x0
ioapic0: int13 0x10100 0x0
ioapic0: int14 0x41 0x0
ioapic0: int15 0x10100 0x0
ioapic0: int16 0xa042 0x0
ioapic0: int17 0xa043 0x0
ioapic0: int18 0xa051 0x0
ioapic0: int19 0xa044 0x0
ioapic0: int20 0x10000 0x0
ioapic0: int21 0x10000 0x0
ioapic0: int22 0x10000 0x0
ioapic0: int23 0x10000 0x0
pctr: user-level cycle counter enabled
apm0: disconnected
ahc0: target 1 using 16bit transfers
ahc0: target 1 synchronous at 80.0MHz DT, offset = 0x7f
dkcsum: sd0 matches BIOS drive 0x80
ahc0: target 2 using 16bit transfers
ahc0: target 2 synchronous at 80.0MHz DT, offset = 0x7f
dkcsum: sd1 matches BIOS drive 0x81
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
cpu1: starting, init idle stack ptr is 0xe905cf98
cpu1: CPU at apid 1 running
ichiic0: timeout, status 0x0
ichiic0: transaction abort failed, status 0x40<INUSE>

Reply via email to