I'm putting a couple of MP servers on-line and am having some networking
problems with the GENERIC.MP -current kernel. (dmesgs below)
When booting from the MP kernel, I have no networking--no pings in or out
(other than localhost) no ssh, nothing.
In this specific machine, I have three nics, an onboard em, an onboard
fxp and an additional sk. If I enable the em with
inet 192.168.0.6 255.255.255.0 NONE
in /etc/hostname.em0, I will get periodic kernel messages on the console
that say:
em0: watchdog timeout -- resetting
If I mv that em0 file to the fxp0 and reboot, I get periodic kernel
messages on the console that say:
fxp0: device timeout
And finally, just for kicks, enabling the sk the same way doesn't throw
any kernel messages, but there is still no networking.
All three interfaces work just fine with the regular single processor
generic kernel.
Thanks,
Jeff
GENERIC.MP dmesg:
OpenBSD 4.0-beta (GENERIC.MP) #16: Wed Aug 16 13:26:24 MDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Xeon(TM) CPU 2.66GHz ("GenuineIntel" 686-class) 2.67 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
real mem = 2146988032 (2096668K)
avail mem = 1950355456 (1904644K)
using 4256 buffers containing 107450368 bytes (104932K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 02/09/05, BIOS32 rev. 0 @ 0xf0010,
SMBIOS rev. 2.3 @ 0xf82a0 (48 entries)
bios0: To Be Filled By O.E.M. To Be Filled By O.E.M.
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf2ff0/224 (12 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801CA LPC" rev 0x00)
pcibios0: PCI bus #4 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x2200 0xca800/0x1800 0xcc000/0x1800
mainbus0: Intel MP Specification (Version 1.4) (INTEL KingsCanyonC)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 133 MHz
cpu1 at mainbus0: apid 6 (application processor)
cpu1: Intel(R) Xeon(TM) CPU 2.66GHz ("GenuineIntel" 686-class) 2.67 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
mainbus0: bus 0 is type PCI
mainbus0: bus 1 is type PCI
mainbus0: bus 2 is type PCI
mainbus0: bus 3 is type PCI
mainbus0: bus 4 is type PCI
mainbus0: bus 5 is type ISA
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0: apid 9 pa 0xfec80000, version 20, 24 pins
ioapic2 at mainbus0: apid 10 pa 0xfec80400, version 20, 24 pins
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel E7501 MCH Host" rev 0x01
ppb0 at pci0 dev 2 function 0 "Intel E7500 MCH" rev 0x01
pci1 at ppb0 bus 1
"Intel 82870P2 IOxAPIC" rev 0x04 at pci1 dev 28 function 0 not configured
ppb1 at pci1 dev 29 function 0 "Intel 82870P2 PCIX-PCIX" rev 0x04
pci2 at ppb1 bus 2
em0 at pci2 dev 1 function 0 "Intel PRO/1000MT (82545EM)" rev 0x01pci_intr_map:
bus 2 dev 1 func 0 pin 1; line 10
pci_intr_map: no MP mapping found
: irq 10, address 00:e0:81:28:e9:71
"Intel 82870P2 IOxAPIC" rev 0x04 at pci1 dev 30 function 0 not configured
ppb2 at pci1 dev 31 function 0 "Intel 82870P2 PCIX-PCIX" rev 0x04
pci3 at ppb2 bus 3
ami0 at pci3 dev 3 function 0 "Symbios Logic MegaRAID" rev 0x01: apic 9 int 0
(irq 10)
ami0: LSI 520, 64b/lhc, FW 1L37, BIOS vG119, 64MB RAM
ami0: 1 channels, 0 FC loops, 2 logical drives
scsibus0 at ami0: 40 targets
sd0 at scsibus0 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct fixed
sd0: 70006MB, 70006 cyl, 64 head, 32 sec, 512 bytes/sec, 143372288 sec total
sd1 at scsibus0 targ 1 lun 0: <AMI, Host drive #01, > SCSI2 0/direct fixed
sd1: 70006MB, 70006 cyl, 64 head, 32 sec, 512 bytes/sec, 143372288 sec total
scsibus1 at ami0: 16 targets
safte0 at scsibus1 targ 6 lun 0: <SUPER, GEM318, 0> SCSI2 3/processor fixed
uhci0 at pci0 dev 29 function 0 "Intel 82801CA/CAM USB" rev 0x02: apic 8 int 16
(irq 10)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ppb3 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x42
pci4 at ppb3 bus 4
fxp0 at pci4 dev 1 function 0 "Intel 8255x" rev 0x10, i82551: apic 10 int 0
(irq 9), address 00:e0:81:28:e9:70
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
vga1 at pci4 dev 2 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
skc0 at pci4 dev 3 function 0 "D-Link Systems DGE-530T A1" rev
0x11pci_intr_map: bus 4 dev 3 func 0 pin 1; line 11
pci_intr_map: no MP mapping found
, Marvell Yukon (0x1): irq 11
sk0 at skc0 port A, address 00:13:46:72:39:e0
eephy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 3
ichpcib0 at pci0 dev 31 function 0 "Intel 82801CA LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801CA IDE" rev 0x02: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 1
scsibus2 at atapiscsi0: 2 targets
cd0 at scsibus2 targ 0 lun 0: <SONY, DVD RW DW-D22A, BYS2> SCSI0 5/cdrom
removable
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
ichiic0 at pci0 dev 31 function 3 "Intel 82801CA/CAM SMBus" rev 0x02: apic 8
int 17 (irq 9)
iic0 at ichiic0
lm1 at iic0 addr 0x29: W83782D
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lm0 at isa0 port 0x290/8: W83627HF
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask 0 netmask 0 ttymask 0
pctr: user-level cycle counter enabled
dkcsum: sd0 matches BIOS drive 0x80
dkcsum: sd1 matches BIOS drive 0x81
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
GENERIC dmesg
OpenBSD 4.0-beta (GENERIC) #35: Wed Aug 16 13:19:04 MDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Xeon(TM) CPU 2.66GHz ("GenuineIntel" 686-class) 2.67 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
real mem = 2146988032 (2096668K)
avail mem = 1950412800 (1904700K)
using 4256 buffers containing 107450368 bytes (104932K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 02/09/05, BIOS32 rev. 0 @ 0xf0010,
SMBIOS rev. 2.3 @ 0xf82a0 (48 entries)
bios0: To Be Filled By O.E.M. To Be Filled By O.E.M.
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf2ff0/224 (12 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801CA LPC" rev 0x00)
pcibios0: PCI bus #4 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x2200 0xca800/0x1800 0xcc000/0x1800
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel E7501 MCH Host" rev 0x01
ppb0 at pci0 dev 2 function 0 "Intel E7500 MCH" rev 0x01
pci1 at ppb0 bus 1
"Intel 82870P2 IOxAPIC" rev 0x04 at pci1 dev 28 function 0 not configured
ppb1 at pci1 dev 29 function 0 "Intel 82870P2 PCIX-PCIX" rev 0x04
pci2 at ppb1 bus 2
em0 at pci2 dev 1 function 0 "Intel PRO/1000MT (82545EM)" rev 0x01: irq 10,
address 00:e0:81:28:e9:71
"Intel 82870P2 IOxAPIC" rev 0x04 at pci1 dev 30 function 0 not configured
ppb2 at pci1 dev 31 function 0 "Intel 82870P2 PCIX-PCIX" rev 0x04
pci3 at ppb2 bus 3
ami0 at pci3 dev 3 function 0 "Symbios Logic MegaRAID" rev 0x01: irq 10
ami0: LSI 520, 64b/lhc, FW 1L37, BIOS vG119, 64MB RAM
ami0: 1 channels, 0 FC loops, 2 logical drives
scsibus0 at ami0: 40 targets
sd0 at scsibus0 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct fixed
sd0: 70006MB, 70006 cyl, 64 head, 32 sec, 512 bytes/sec, 143372288 sec total
sd1 at scsibus0 targ 1 lun 0: <AMI, Host drive #01, > SCSI2 0/direct fixed
sd1: 70006MB, 70006 cyl, 64 head, 32 sec, 512 bytes/sec, 143372288 sec total
scsibus1 at ami0: 16 targets
safte0 at scsibus1 targ 6 lun 0: <SUPER, GEM318, 0> SCSI2 3/processor fixed
uhci0 at pci0 dev 29 function 0 "Intel 82801CA/CAM USB" rev 0x02: irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ppb3 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x42
pci4 at ppb3 bus 4
fxp0 at pci4 dev 1 function 0 "Intel 8255x" rev 0x10, i82551: irq 9, address
00:e0:81:28:e9:70
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
vga1 at pci4 dev 2 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
skc0 at pci4 dev 3 function 0 "D-Link Systems DGE-530T A1" rev 0x11, Marvell
Yukon (0x1): irq 11
sk0 at skc0 port A, address 00:13:46:72:39:e0
eephy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 3
ichpcib0 at pci0 dev 31 function 0 "Intel 82801CA LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801CA IDE" rev 0x02: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 1
scsibus2 at atapiscsi0: 2 targets
cd0 at scsibus2 targ 0 lun 0: <SONY, DVD RW DW-D22A, BYS2> SCSI0 5/cdrom
removable
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
ichiic0 at pci0 dev 31 function 3 "Intel 82801CA/CAM SMBus" rev 0x02: irq 9
iic0 at ichiic0
lm1 at iic0 addr 0x29: W83782D
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lm0 at isa0 port 0x290/8: W83627HF
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask e7e5 netmask efe5 ttymask ffe7
pctr: user-level cycle counter enabled
dkcsum: sd0 matches BIOS drive 0x80
dkcsum: sd1 matches BIOS drive 0x81
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
