A multi-home firewall with 09/25/06, i386 snap-shot.
WI_LAN interface is a dc0 connected to an Intel AP with cross-over cable.
Use 'authpf' on WI_LAN interface.
Laptop running Windows XP Pro with Intel PRO/Wireless 2011 LAN PC Card has
no problem (using PuTTy).
G4 Powerbook running 'OS X Tiger' with airport card (en1) fails. But has no
problem when using ethernet port (en0) on internal LAN.
===== ssh using airport card (en1) ======
g4powerbook:~ alexlee$ ifconfig -a
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether 00:03:93:d1:3a:fc
media: autoselect (none) status: inactive
supported media: none autoselect 10baseT/UTP <half-duplex>
10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 100baseTX
<half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback>
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::20d:93ff:fe7d:6471%en1 prefixlen 64 scopeid 0x5
inet 10.1.1.11 netmask 0xffffff00 broadcast 10.1.1.255
ether 00:0d:93:7d:64:71
media: autoselect status: active
supported media: autoselect
fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 2030
lladdr 00:03:93:ff:fe:d1:3a:fc
media: autoselect <full-duplex> status: inactive
supported media: autoselect <full-duplex>
g4powerbook:~ alexlee$ ssh -v 10.1.1.1
OpenSSH_4.2p1, OpenSSL 0.9.7i 14 Oct 2005
debug1: Reading configuration data /etc/ssh_config
debug1: Connecting to 10.1.1.1 [10.1.1.1] port 22.
debug1: Connection established.
debug1: identity file /Users/alexlee/.ssh/identity type -1
debug1: identity file /Users/alexlee/.ssh/id_rsa type -1
debug1: identity file /Users/alexlee/.ssh/id_dsa type -1
debug1: Remote protocol version 2.0, remote software version OpenSSH_4.4
debug1: match: OpenSSH_4.4 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_4.2
debug1: An invalid name was supplied
Cannot determine realm for numeric host address
debug1: An invalid name was supplied
A parameter was malformed
Validation error
debug1: An invalid name was supplied
Cannot determine realm for numeric host address
debug1: An invalid name was supplied
A parameter was malformed
Validation error
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug1: kex: server->client aes128-cbc hmac-md5 none
debug1: kex: client->server aes128-cbc hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
Write failed: Broken pipe
g4powerbook:~ alexlee$
===== ssh using ethernet port (en0) =======
g4powerbook:~ alexlee$ ssh -v 192.168.1.1
OpenSSH_4.2p1, OpenSSL 0.9.7i 14 Oct 2005
debug1: Reading configuration data /etc/ssh_config
debug1: Connecting to 192.168.1.1 [192.168.1.1] port 22.
debug1: Connection established.
debug1: identity file /Users/alexlee/.ssh/identity type -1
debug1: identity file /Users/alexlee/.ssh/id_rsa type -1
debug1: identity file /Users/alexlee/.ssh/id_dsa type -1
debug1: Remote protocol version 2.0, remote software version OpenSSH_4.4
debug1: match: OpenSSH_4.4 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_4.2
debug1: An invalid name was supplied
Cannot determine realm for numeric host address
debug1: An invalid name was supplied
A parameter was malformed
Validation error
debug1: An invalid name was supplied
Cannot determine realm for numeric host address
debug1: An invalid name was supplied
A parameter was malformed
Validation error
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug1: kex: server->client aes128-cbc hmac-md5 none
debug1: kex: client->server aes128-cbc hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug1: Host '192.168.1.1' is known and matches the RSA host key.
debug1: Found key in /Users/alexlee/.ssh/known_hosts:1
debug1: ssh_rsa_verify: signature correct
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug1: SSH2_MSG_NEWKEYS received
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug1: Authentications that can continue:
publickey,password,keyboard-interactive
debug1: Next authentication method: publickey
debug1: Trying private key: /Users/alexlee/.ssh/identity
debug1: Trying private key: /Users/alexlee/.ssh/id_rsa
debug1: Trying private key: /Users/alexlee/.ssh/id_dsa
debug1: Next authentication method: keyboard-interactive
debug1: Authentications that can continue:
publickey,password,keyboard-interactive
debug1: Next authentication method: password
[EMAIL PROTECTED]'s password:
===================================
Does anyone has similar problem with Mac airport card ? Thanks.
_________________________________________________________________
Share your special moments by uploading 500 photos per month to Windows Live
Spaces
http://clk.atdmt.com/MSN/go/msnnkwsp0070000001msn/direct/01/?href=http://www.get.live.com/spaces/features
