Hi, I'm building a firewall with 6 ethernet interfaces. It's a Tyan S2425 mobo with 2 onboard NICs and added quad port Routerboard 44 card on a 1U PCI riser card. The problem is that vr0 does not work. It's detected with MAC address ff:ff:ff:ff:ff:ff and the PHY for vr0 is not detected. vr1, vr2, vr3, as well as onboard fxp0 and fxp1 work just fine.
Any ideas what could be wrong here? Here's the dmesg: OpenBSD 4.0 (GENERIC) #1107: Sat Sep 16 19:15:58 MDT 2006 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel(R) Pentium(R) III CPU - S 1266MHz ("GenuineIntel" 686-class) 1.27 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE real mem = 535261184 (522716K) avail mem = 480309248 (469052K) using 4256 buffers containing 26865664 bytes (26236K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+(00) BIOS, date 05/01/03, BIOS32 rev. 0 @ 0xfdb80, SMBIOS rev. 2.3 @ 0xf06 40 (131 entries) apm0 at bios0: Power Management spec V1.2 apm0: AC on, battery charge unknown apm0: flags 30102 dobusy 0 doidle 1 pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf3b10/272 (15 entries) pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801AA LPC" rev 0x00) pcibios0: PCI bus #2 is the last bus bios0: ROM list: 0xc0000/0xc000 0xcc000/0x1000 0xcd000/0x1800 cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "Intel 82815 Hub" rev 0x04 vga1 at pci0 dev 2 function 0 "Intel 82815 Graphics" rev 0x04: aperture at 0xfc000000, size 0x200000 0 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) ppb0 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x05 pci1 at ppb0 bus 1 ppb1 at pci1 dev 5 function 0 vendor "Hint", unknown product 0x0021 rev 0x15 pci2 at ppb1 bus 2 vr0 at pci2 dev 8 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 11, address ff:ff:ff:ff:ff:ff vr1 at pci2 dev 9 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 11, address 00:0c:42:02:2b:43 ukphy0 at vr1 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063, model 0x0034 vr2 at pci2 dev 10 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 11, address 00:0c:42:02:2b:44 ukphy1 at vr2 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063, model 0x0034 vr3 at pci2 dev 11 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 11, address 00:0c:42:02:2b:45 ukphy2 at vr3 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063, model 0x0034 fxp0 at pci1 dev 8 function 0 "Intel 82562" rev 0x03, i82562: irq 11, address 00:e0:81:29:da:16 inphy0 at fxp0 phy 1: i82562EM 10/100 PHY, rev. 0 fxp1 at pci1 dev 11 function 0 "Intel 8255x" rev 0x08, i82559: irq 5, address 00:e0:81:29:da:17 inphy1 at fxp1 phy 1: i82555 10/100 PHY, rev. 4 ichpcib0 at pci0 dev 31 function 0 "Intel 82801BA LPC" rev 0x05 pciide0 at pci0 dev 31 function 1 "Intel 82801BA IDE" rev 0x05: DMA, channel 0 wired to compatibilit y, channel 1 wired to compatibility pciide0: channel 0 disabled (no drives) wd0 at pciide0 channel 1 drive 0: <ST340016A> wd0: 16-sector PIO, LBA, 38166MB, 78165360 sectors wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5 ichiic0 at pci0 dev 31 function 3 "Intel 82801BA SMBus" rev 0x05: irq 10 iic0 at ichiic0 isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 nsclpcsio0 at isa0 port 0x2e/2: NSC PC87366 rev 10: GPIO VLM TMS gpio0 at nsclpcsio0: 29 pins npx0 at isa0 port 0xf0/16: using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pccom0: console pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo biomask f745 netmask ff65 ttymask ffe7 pctr: 686-class user-level performance counters enabled mtrr: Pentium Pro MTRR support dkcsum: wd0 matches BIOS drive 0x80 root on wd0a rootdev=0x0 rrootdev=0x300 rawdev=0x302