Hello, the subject line pretty much tells it. In console everything works okay except when I do `sudo halt` and it says something like "press any key to reboot". At that point it doesn't accept any input to make it reboot. It isn't supposed to work like that, is it?
I think this guy [1] had exactly same problem in 2005 regarding the lag in X. [1] http://archives.neohapsis.com/archives/openbsd/2005-01/0788.html Here's my dmesg, it's snapshot of current: OpenBSD 4.0-current (GENERIC) #1332: Wed Jan 3 21:24:57 MST 2007 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: AMD Athlon(tm) XP 2200+ ("AuthenticAMD" 686-class, 256KB L2 cache) 1.90 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE real mem = 804810752 (785948K) avail mem = 725516288 (708512K) using 4256 buffers containing 40366080 bytes (39420K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+(00) BIOS, date 09/05/03, BIOS32 rev. 0 @ 0xfdaf0, SMBIOS rev. 2.3 @ 0xf0630 (22 entries) bios0: MSI MS-6590 apm0 at bios0: Power Management spec V1.2 apm0: AC on, battery charge unknown apm0: flags 30102 dobusy 0 doidle 1 pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf7fb0/240 (13 entries) pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT8237 ISA" rev 0x00) pcibios0: PCI bus #1 is the last bus bios0: ROM list: 0xc0000/0xf800 0xcf800/0x4400! 0xd4000/0x1800 acpi at mainbus0 not configured cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "VIA VT8377 PCI" rev 0x80 ppb0 at pci0 dev 1 function 0 "VIA VT8377 AGP" rev 0x00 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 "NVIDIA GeForce FX 5500" rev 0xa1 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) emu0 at pci0 dev 10 function 0 "Creative Labs SoundBlaster Audigy" rev 0x03: irq 12 ac97: codec id 0x54524123 (TriTech Microelectronics TR28602) audio0 at emu0 "Creative Labs SoundBlaster Audigy Digital" rev 0x03 at pci0 dev 10 function 1 not configured "Creative Labs Firewire" rev 0x00 at pci0 dev 10 function 2 not configured bge0 at pci0 dev 11 function 0 "Broadcom BCM5788" rev 0x03, BCM5705 A3 (0x3003): irq 10, address 00:0c:76:3e:6d:c4 brgphy0 at bge0 phy 1: BCM5705 10/100/1000baseT PHY, rev. 2 "VIA VT6306 FireWire" rev 0x46 at pci0 dev 14 function 0 not configured pciide0 at pci0 dev 15 function 0 "VIA VT6420 SATA" rev 0x80: DMA pciide0: using irq 11 for native-PCI interrupt wd0 at pciide0 channel 0 drive 0: <ST3250824AS> wd0: 16-sector PIO, LBA48, 238475MB, 488397168 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 pciide1 at pci0 dev 15 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, channel 0 configured to compatibility, channel 1 configured to compatibility pciide1: channel 0 disabled (no drives) atapiscsi0 at pciide1 channel 1 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <PLEXTOR, DVDR PX-708A, 1.08> SCSI0 5/cdrom removable cd0(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 2 uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x81: irq 11 usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: VIA UHCI root hub, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x81: irq 11 usb1 at uhci1: USB revision 1.0 uhub1 at usb1 uhub1: VIA UHCI root hub, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x81: irq 12 usb2 at uhci2: USB revision 1.0 uhub2 at usb2 uhub2: VIA UHCI root hub, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0x81: irq 12 usb3 at uhci3: USB revision 1.0 uhub3 at usb3 uhub3: VIA UHCI root hub, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x86: irq 10 usb4 at ehci0: USB revision 2.0 uhub4 at usb4 uhub4: VIA EHCI root hub, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered viapm0 at pci0 dev 17 function 0 "VIA VT8237 ISA" rev 0x00 iic0 at viapm0 iic0: addr 0x2f 04=00 06=0b 07=00 0c=00 0d=07 0e=84 0f=00 10=c0 11=10 12=00 13=60 14=14 15=62 16=01 17=06 isa0 at mainbus0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 lm0 at isa0 port 0x290/8: W83697HF npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec biomask ff65 netmask ff65 ttymask ffe7 pctr: user-level cycle counter enabled mtrr: Pentium Pro MTRR support uhidev0 at uhub1 port 2 configuration 1 interface 0uhidev1 at uhub2 port 2 configuration 1 interface 0 uhidev0: Logitech USB Receiver, rev 1.10/9.10, addr 2, iclass 3/1 uhidev1: BTC USB Multimedia Keyboard, rev 1.10/1.30, addr 2, iclass 3/1 ums0 at uhidev0: 5 buttons and Z dir. wsmouse0 at ums0 mux 0 ukbd0 at uhidev1: 8 modifier keys, 6 key codes wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 uhidev2 at uhub2 port 2 configuration 1 interface 1 uhidev2: BTC USB Multimedia Keyboard, rev 1.10/1.30, addr 2, iclass 3/0 uhidev2: 3 report ids uhid0 at uhidev2 reportid 1: input=1, output=0, feature=0 uhid1 at uhidev2 reportid 2: input=3, output=0, feature=0 uhid2 at uhidev2 reportid 3: input=3, output=0, feature=4 dkcsum: wd0 matches BIOS drive 0x80 root on wd0a rootdev=0x0 rrootdev=0x300 rawdev=0x302 pckbc: command timeout pckbcintr: no dev for slot 1 pckbc: command timeout pckbcintr: no dev for slot 1