dmesg output of the disk that runs correctly:
umass0 at uhub2 port 2 configuration 1 interface 0
umass0: Cypress Semiconductor USB2.0 Storage Device, rev 2.00/0.01,
addr 2
umass0: using SCSI over Bulk-Only
sd0 at scsibus1 targ 1 lun 0: <ST315323, A, 0000> SCSI0 0/direct fixed
sd0: 14652MB, 14652 cyl, 64 head, 32 sec, 512 bytes/sec, 30008475 sec
total
Are you running GERNERIC?
So , uhub* -> umass* -> scsibus* -> sd*
But scsius* isn't attaching. Do you have "scsibus* at umass?" or just
static "scsibus1 at umass0" ?
~BAS
dmesg output of other disk:
umass1 at uhub2 port 3 configuration 1 interface 0
umass1: Iomega External HD, rev 2.00/0.00, addr 3
umass1: using SCSI over Bulk-Only
As you can see, the system don't link it with any device (sdX, etc),
can i link it manually?
Obviously, with no device linked to it, the output of fdisk and
disklabel with any sdX device (except of sd0 with are the device of
the external usb box that runs ok) is Device not configured.
A lot of thanks
--
Angel Sancho Alvarez
l8*
-lava (Brian A. Seklecki - Pittsburgh, PA, USA)
http://www.spiritual-machines.org/
"...from back in the heady days when "helpdesk" meant nothing, "diskquota"
meant everything, and lives could be bought and sold for a couple of pages
of laser printout - and frequently were."
