Hi, thanks for your answer
Yes, I'm running GENERIC:
[EMAIL PROTECTED]:/home/angel $ uname -a
OpenBSD notdefined 3.9 GENERIC#617 i386
Really, I don't know why scsibus isn't attaching, can I attach it
manually without rebuild the kernel?
2007/2/6, Brian A. Seklecki <[EMAIL PROTECTED]>:
>
> dmesg output of the disk that runs correctly:
> umass0 at uhub2 port 2 configuration 1 interface 0
> umass0: Cypress Semiconductor USB2.0 Storage Device, rev 2.00/0.01,
> addr 2
> umass0: using SCSI over Bulk-Only
> sd0 at scsibus1 targ 1 lun 0: <ST315323, A, 0000> SCSI0 0/direct fixed
> sd0: 14652MB, 14652 cyl, 64 head, 32 sec, 512 bytes/sec, 30008475 sec
> total
Are you running GERNERIC?
So , uhub* -> umass* -> scsibus* -> sd*
But scsius* isn't attaching. Do you have "scsibus* at umass?" or just
static "scsibus1 at umass0" ?
~BAS
>
> dmesg output of other disk:
> umass1 at uhub2 port 3 configuration 1 interface 0
> umass1: Iomega External HD, rev 2.00/0.00, addr 3
> umass1: using SCSI over Bulk-Only
>
> As you can see, the system don't link it with any device (sdX, etc),
> can i link it manually?
>
> Obviously, with no device linked to it, the output of fdisk and
> disklabel with any sdX device (except of sd0 with are the device of
> the external usb box that runs ok) is Device not configured.
>
> A lot of thanks
>
> --
> Angel Sancho Alvarez
>
>
l8*
-lava (Brian A. Seklecki - Pittsburgh, PA, USA)
http://www.spiritual-machines.org/
"...from back in the heady days when "helpdesk" meant nothing, "diskquota"
meant everything, and lives could be bought and sold for a couple of pages
of laser printout - and frequently were."
--
Angel Sancho Alvarez
