> > wd0 at pciide1 channel 0 drive 0: <ST3808110AS> > > wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors > > wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5 > > wd0: no disk label > > dkcsum: wd0 matches BIOS drive 0x80 > ... > > No disks found. > > that's odd...
This is caused by the kernel dmesg being flooded with the axe error messages. The OP should try to boot -c, disable axe, and install without axe; this should at least allow the installation to proceed. Miod
