I have a TP X31 on which I just compiled ACPI-enabled kernel, so I
finally can get access to the thermal sensors. But, at the same time,
the shortcuts to suspend (Fn+F4), hibernate (Fn+F12) or even turn off
the screen (Fn+F3) stopped working. Is that a known behaviour? Is
there a way to make those work again?
Kernel config I used:
=========<config>========================
include "arch/i386/conf/GENERIC"
option ACPIVERBOSE
option ACPI_ENABLE
acpi0 at mainbus?
acpitimer* at acpi?
acpihpet* at acpi?
acpiac* at acpi?
acpibat* at acpi?
acpibtn* at acpi?
acpicpu* at acpi?
acpidock* at acpi?
acpiec* at acpi?
acpiprt* at acpi?
acpitz* at acpi?
===========</config>====================
Just in case, dmesg below:
OpenBSD 4.1-current (ACPI) #1: Thu Mar 22 11:59:36 CET 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/ACPI
cpu0: Intel(R) Pentium(R) M processor 1600MHz ("GenuineIntel"
686-class) 1.60 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,TM,SBF,EST,TM2
real mem = 804155392 (785308K)
avail mem = 725643264 (708636K)
using 4278 buffers containing 40333312 bytes (39388K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+ BIOS, date 09/22/05, BIOS32 rev. 0 @
0xfd750, SMBIOS rev. 2.33 @ 0xe0010 (57 entries)
bios0: IBM 2885PWU
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 100%
apm0: AC on, battery charge high
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xfd6e0/0x920
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdea0/272 (15 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #6 is the last bus
bios0: ROM list: 0xc0000/0x10000 0xd0000/0x1000 0xd1000/0x1000
0xdc000/0x4000! 0xe0000/0x10000
acpi0 at mainbus0: rev 2
acpi0: tables DSDT FACP SSDT ECDT TCPA BOOT
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpi device at acpi0 from table DSDT not configured
acpi device at acpi0 from table FACP not configured
acpi device at acpi0 from table SSDT not configured
acpi device at acpi0 from table ECDT not configured
acpi device at acpi0 from table TCPA not configured
acpi device at acpi0 from table BOOT not configured
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (AGP_)
acpiprt2 at acpi0: bus 2 (PCI1)
acpiprt3 at acpi0: bus 0 (DOCK)
acpiec0 at acpi0: EC__
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibat0 at acpi0: BAT0: model: IBM-08K8039 serial: 1202 type: LION
oem: Panasonic
acpibat1 at acpi0: BAT1: not present
acpibat2 at acpi0: BAT2: not present
acpiac0 at acpi0: AC unit online
acpicpu0 at acpi0: CPU_: 1600, 1400, 1200, 1000, 800, 600 MHz
acpitz0 at acpi0, critical temperature: 91 degC
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82855PE Hub" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82855PE AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M6 LY" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01: irq 11
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01: irq 11
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x01: irq 11
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01: irq 11
usb0 at ehci0: USB revision 2.0
uhub0 at usb0
uhub0: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub0: 6 ports with 6 removable, self powered
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x81
pci2 at ppb1 bus 2
cbb0 at pci2 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xaa: irq 11
cbb1 at pci2 dev 0 function 1 "Ricoh 5C476 CardBus" rev 0xaa: irq 5
"Ricoh 5C552 Firewire" rev 0x02 at pci2 dev 0 function 2 not configured
em0 at pci2 dev 1 function 0 "Intel PRO/1000MT (82540EP)" rev 0x03:
irq 11, address 00:09:6b:bf:79:b0
ipw0 at pci2 dev 2 function 0 "Intel PRO/Wireless 2100" rev 0x04: irq
11, address 00:04:23:78:c1:da
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x0, lattimer 0xb0
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 6 device 0 cacheline 0x0, lattimer 0xb0
pcmcia1 at cardslot1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x01: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <ST9120821A>
wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, RW/DVD GCC-4240N, 0213> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev 0x01: irq 5
iic0 at ichiic0
auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x01: irq 5, ICH4 AC97
ac97: codec id 0x41445374 (Analog Devices AD1981B)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auich0
"Intel 82801DB Modem" rev 0x01 at pci0 dev 31 function 6 not configured
usb1 at uhci0: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
usb2 at uhci1: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
usb3 at uhci2: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt2 at isa0 port 0x3bc/4: polled
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
biomask efe5 netmask efe5 ttymask ffe7
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
auich0: measured ac97 link rate at 47954 Hz, will use 48000 Hz
--
viq
