Sorry to keep hassling people over this, but does anyone have *any* idea as
to
why my USB2 card's not working? The USB1 part of the card works fine, it's
just the EHCI controller won't start up.
Without USB2 support my box is largely useless due to having a very small
hard
disk, and while it's all working fine with USB1 I'm only getting 250kB/sec
off
it...
> OpenBSD 4.0-stable (GENERIC) #0: Sun Mar 18 17:09:20 GMT 2007
> [EMAIL PROTECTED]:/vol/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel Pentium/MMX ("GenuineIntel" 586-class) 166 MHz
> cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,MMX
> cpu0: F00F bug workaround installed
> real mem = 50032640 (48860K)
> avail mem = 37126144 (36256K)
> using 636 buffers containing 2605056 bytes (2544K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(63) BIOS, date 11/01/99, BIOS32 rev. 0 @ 0xfe95b
> apm0 at bios0: Power Management spec V1.2
> apm0: battery life expectancy 98%
> apm0: AC on, battery charge high, charging, estimated 1:44 hours
> apm0: flags 20102 dobusy 0 doidle 1
> pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf9980/80 (3 entries)
> pcibios0: no compatible PCI ICU found: ICU vendor 0xffff product 0xffff
> pcibios0: Warning, unable to fix up PCI interrupt routing
> pcibios0: PCI bus #21 is the last bus
> WARNING: can't reserve area for I/O APIC.
> WARNING: can't reserve area for Local APIC.
> bios0: ROM list: 0xe4000/0x9800
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Toshiba PCI" rev 0x26
> cbb0 at pci0 dev 2 function 0 "Toshiba ToPIC95B CardBus" rev 0x07: irq 11
> cbb1 at pci0 dev 2 function 1 "Toshiba ToPIC95B CardBus" rev 0x07: irq 11
> vga1 at pci0 dev 4 function 0 "Chips and Technologies 65555" rev 0xc3
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> ohci0 at pci0 dev 11 function 0 "NEC USB" rev 0x01: irq 11, version 1.0
> usb0 at ohci0: USB revision 1.0
> uhub0 at usb0
> uhub0: NEC OHCI root hub, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> cardslot0 at cbb0 slot 0 flags 0
> cardbus0 at cardslot0: bus 20 device 0 cacheline 0x0, lattimer 0x0
> pcmcia0 at cardslot0
> cardslot1 at cbb1 slot 1 flags 0
> cardbus1 at cardslot1: bus 21 device 0 cacheline 0x0, lattimer 0x0
> pcmcia1 at cardslot1
> isa0 at mainbus0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> wdc0 at isa0 port 0x1f0/8 irq 14
> wd0 at wdc0 channel 0 drive 0: <TOSHIBA MK2103MAV>
> wd0: 16-sector PIO, LBA, 2067MB, 4233600 sectors
> wd0(wdc0:0:0): using BIOS timings
> sb0 at isa0 port 0x220/24 irq 5 drq 1: dsp v3.01
> midi0 at sb0: <SB MIDI UART>
> audio0 at sb0
> opl0 at sb0: model OPL3
> midi1 at opl0: <SB Yamaha OPL3>
> wss0 at isa0 port 0x530/8 irq 10 drq 0: CS4231 or AD1845 (vers 4)
> audio1 at wss0
> pcppi0 at isa0 port 0x61
> midi2 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> biomask eb4d netmask eb4d ttymask fbcf
> pctr: 586-class performance counters and user-level cycle counter enabled
> rtw0 at cardbus0 dev 0 function 0 "Realtek, Rtl8180" irq 11
> rtw0: ver RTL8180D, radio SA2400A, amp SA2411, address 00:50:fc:f1:82:14
> ohci1 at cardbus1 dev 0 function 0 "Acer Labs M5237 USB" rev 0x03: irq 11,
> version 1.0, legacy support
> usb1 at ohci1: USB revision 1.0
> uhub1 at usb1
> uhub1: Acer Labs OHCI root hub, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> ohci2 at cardbus1 dev 0 function 1 "Acer Labs M5237 USB" rev 0x03: irq 11,
> version 1.0, legacy support
> dkcsum: wd0 matches BIOS drive 0x80
> root on wd0a
> rootdev=0x0 rrootdev=0x300 rawdev=0x302
> usb2 at ohci2: USB revision 1.0
> uhub2 at usb2
> uhub2: Acer Labs OHCI root hub, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> ohci3 at cardbus1 dev 0 function 2 "Acer Labs M5237 USB" rev 0x03: irq 11,
> version 1.0, legacy support
> usb3 at ohci3: USB revision 1.0
> uhub3 at usb3
> uhub3: Acer Labs OHCI root hub, rev 1.00/1.00, addr 1
> uhub3: 2 ports with 2 removable, self powered
> ehci0 at cardbus1 dev 0 function 3 "Acer Labs M5239 USB2" rev 0x01: irq 11
> ehci0: reset timeout
> ehci0: init failed, error=13
> vendor "Acer Labs", unknown product 0x5253 (class serial bus subclass
> Firewire, rev 0x00) at cardbus1 dev 0 function 4 not configured
> umass0 at uhub1 port 1 configuration 1 interface 0
> umass0: Cypress Semiconductor USB2.0 Storage Device, rev 2.00/0.01, addr 2
> umass0: using SCSI over Bulk-Only
> scsibus0 at umass0: 2 targets
> sd0 at scsibus0 targ 1 lun 0: <Maxtor 6, Y080L0, 0000> SCSI0 0/direct fixed
> sd0: 78167MB, 78167 cyl, 64 head, 32 sec, 512 bytes/sec, 160086528 sec
total
--
b bb o=o=o< o=o=o=o= o=o=o= o<o=o=o=
bbb
http://www.cowlark.com
bbbbbbbbbbbbbbbbbbb
b "Thou who might be our Father, who perhaps may be in Heaven, hallowed be
b Thy Name, if Name Thou hast and any desire to see it hallowed..." ---
b _Creatures of Light and Darkness_
[demime 1.01d removed an attachment of type application/pgp-signature which had
a name of signature.asc]
