Hi, On Tue, 01.05.2007 at 00:55:40 -0600, rc <[EMAIL PROTECTED]> wrote: > Address. One router between the second line will not resolve this > problem since the two different network is needed to make routing > possible.
I'm not convinced, but instead think that one router put in between solves the problem. That's because this other router won't even (need to) know the other (same) network on the other ADSL device. > > 10.0.0.1|-----[NAT router 10.0.0.30 - external IP 1]-----ADSL 1 > >[Server | > > 10.0.0.2|-----[NAT router 10.0.0.30 - external IP 2]-----ADSL 2 Imho, the modified setup will look like this: +--------------------------- adsl router 1 ------ Internet server +------- new router -------- adsl router 2 ------ Internet You'd have to change your networking to have two distinct networks on the server to make this work. Ie, not 10.0.0.1 and 10.0.0.2, but rather 10.0.0.1 and 10.0.1.1 (or similar). Then you'll probably have the problem left of how to ensure reliable connectivity and, maybe, how to push your packets out those lines where their counterparts arrive... But setting things up properly in the first place and not wasting a router for such a hack is preferrable. Best, --Toni++