Hi all,
I'm having a lot of crashes with my 4.1 since I updated from 4.0 ...the
console output is:
page fault trap code=0
stopped at enqueue_randomness+0xc5 addb %al,0(%eax)
ddb>
I tried checking the RAM (Memtest runned 20 hours withour any error and I
used this box with another ram stick) and I get the same result..a crash
every 10-15 hours. Any suggestion?
OpenBSD 4.1 (GENERIC) #6: Sun May 6 22:37:50 CEST 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD-K6(tm) 3D processor ("AuthenticAMD" 586-class) 500 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX
real mem = 536440832 (523868K)
avail mem = 481771520 (470480K)
using 4278 buffers containing 26947584 bytes (26316K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+ BIOS, date 12/27/99, BIOS32 rev. 0 @ 0xfd9a0,
SMBIOS rev. 2.3 @ 0xf04f0 (23 entries)
bios0: American Megatrends Inc. Uknown
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf7630/144 (7 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("Acer Labs M1533 ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x10000 0xd0000/0x800
acpi at mainbus0 not configured
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Acer Labs M1541 PCI" rev 0x04
ppb0 at pci0 dev 1 function 0 "Acer Labs M5243 AGP/PCI-PCI" rev 0x04
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA Vanta" rev 0x15
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0 "Acer Labs M1533 ISA" rev 0xc3
pciide0 at pci0 dev 15 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc1: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <IC35L060AVVA07-0>
wd0: 16-sector PIO, LBA, 58644MB, 120103200 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <LITEON, CD-ROM LTN362, UL28> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
xl0 at pci0 dev 16 function 0 "3Com 3c905 100Base-TX" rev 0x00: irq 11,
address 00:60:97:ad:10:76
nsphy0 at xl0 phy 24: DP83840 10/100 PHY, rev. 1
xl1 at pci0 dev 18 function 0 "3Com 3c905C 100Base-TX" rev 0x74: irq 9,
address 00:01:02:b9:48:2c
bmtphy0 at xl1 phy 24: Broadcom 3C905C internal PHY, rev. 6
ohci0 at pci0 dev 20 function 0 "Opti 82C861" rev 0x10: irq 10, version 1.0,
legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Opti OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
isapnp0 at isa0 port 0x279: read port 0x203
sb1 at isapnp0 "Creative SB16 PnP, CTL0031, , Audio" port
0x220/16,0x330/2,0x388/4 irq 5 drq 1,5: dsp v4.13
midi1 at sb1: <SB MPU-401 UART>
audio0 at sb1
opl0 at sb1: model OPL3
midi2 at opl0: <SB Yamaha OPL3>
wdc2 at isapnp0 "Creative SB16 PnP, CTL2011, PNP0600, IDE" port
0x100/8,0x300/2 irq 15
"Creative SB16 PnP, PNPFFFF, , Reserved" at isapnp0 port 0x108/1 not
configured
joy0 at isapnp0 "Creative SB16 PnP, CTL7001, PNPB02F, Game" port 0x200/8
biomask f545 netmask ff45 ttymask ffc7
pctr: user-level cycle counter enabled
mtrr: K6-family MTRR support (2 registers)
umass0 at uhub0 port 2 configuration 1 interface 0
umass0: Generic Flash Disk, rev 2.00/1.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets
sd0 at scsibus1 targ 1 lun 0: <Generic, USB Flash Drive, 1.00> SCSI2
0/direct removable
sd0: 508MB, 508 cyl, 64 head, 32 sec, 512 bytes/sec, 1040384 sec total
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
wd0a: DMA error reading fsbn 128 of 128-0 (wd0 bn 191; cn 0 tn 3 sn 2),
retrying
wd0: soft error (corrected)
WARNING: / was not properly unmounted
wd0: transfer error, downgrading to Ultra-DMA mode 1
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 1
wd0a: DMA error reading fsbn 4832 of 4832-0 (wd0 bn 4895; cn 5 tn 2 sn 44),
retrying
wd0: soft error (corrected)
