Hi Alexander,
Thanks
On the first time, I did see following error:
d0(pciide0:0:0): timeout
type: ata
c_bcount: 512
c_skip: 0
pciide0:0:0: bus-master DMA error: missing interrupt, status=0x21
But it went away once booted and no longer appeared, unless I mirrored my
HDD again and boot from the same board.
Plain keyboard and monitor, no serial console plugged in.
I did try to config wd0 with flags 0xfac or 0xffc without luck: above error
disappeared but still stopped on boot>
Please see bellow for dmesg, which was generated once hit Return key to
continue boot sequence from boot>.
Thanks,
Kevin
> > - OpenBSD 4.0
> > - No /etc/boot.conf
> > - Intel Celeron 1GHz from
> > http://www.axiomtek.com.tw/Download/Spec/na-806b.pdf
> > - same image booted fine with any other P3 or P4 machines.
>
> Plain keyboard and monitor? Serial console?
>
> Furthermore; Supply a *full dmesg*. Then someone (albeit probably not
> me) might help you.
>
> /Alexander
>
>
OpenBSD 4.0 (GENERIC) #1107: Sat Sep 16 19:15:58 MDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) M processor 1.00GHz ("GenuineIntel" 686-class, 0KB
L2 cache) 1 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,
MMX,FXSR,SSE,SSE2,SS,TM,SBF
real mem = 234450944 (228956K)
avail mem = 206147584 (201316K)
using 2887 buffers containing 11825152 bytes (11548K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(bd) BIOS, date 07/26/05, BIOS32 rev. 0 @ 0xfb030
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xda14
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfd940/192 (10 entries)
pcibios0: PCI Exclusive IRQs: 5 9 10 11
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801DBM LPC" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xc800 0xd0000/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82852GM Hub-PCI" rev 0x02
"Intel 82852GM Memory" rev 0x02 at pci0 dev 0 function 1 not configured
"Intel 82852GM Configuration" rev 0x02 at pci0 dev 0 function 3 not
configured
vga1 at pci0 dev 2 function 0 "Intel 82852GM AGP" rev 0x02: aperture at
0xd8000000, size 0x8000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel 82852GM AGP" rev 0x02 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x02: irq 5
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x02: irq 9
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x02: irq 11
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
ppb0 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x82
pci1 at ppb0 bus 1
fxp0 at pci1 dev 4 function 0 "Intel 82559ER" rev 0x10, i82551: irq 5,
address 00:60:e0:e1:fa:00
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
fxp1 at pci1 dev 5 function 0 "Intel 82559ER" rev 0x10, i82551: irq 10,
address 00:60:e0:e1:fa:01
inphy1 at fxp1 phy 1: i82555 10/100 PHY, rev. 4
fxp2 at pci1 dev 6 function 0 "Intel 82559ER" rev 0x10, i82551: irq 11,
address 00:60:e0:e1:fa:02
inphy2 at fxp2 phy 1: i82555 10/100 PHY, rev. 4
fxp3 at pci1 dev 7 function 0 "Intel 82559ER" rev 0x10, i82551: irq 9,
address 00:60:e0:e1:fa:03
inphy3 at fxp3 phy 1: i82555 10/100 PHY, rev. 4
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DB LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801DB IDE" rev 0x02: DMA, channel
0 configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
wd0 at pciide0 channel 1 drive 0: <HTS541040G9AT00>
wd0: 16-sector PIO, LBA48, 38154MB, 78140160 sectors
wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev 0x02: irq 10
iic0 at ichiic0
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lm0 at isa0 port 0x290/8: W83627HF
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask efe5 netmask efe5 ttymask ffe7
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
