Josi Christian Rodrmguez wrote:
> Hi list,
> My system was freeze and when reboot show:
>
> /dev/rsd0a: file system is clean;not checking
> /dev/rsd0d: file system is clean;not checking
> /dev/rsd0e: file system is clean;not checking
> /dev/rsd0g: INCORRECT BLOCK COUNT I=2699655 (20 should be 16) (CORRECTED)
> PARTIALLY TRUNCATED INODE I=19268881
> /dev/rsd0g:UNEXPECTED INCONSISTENCY; RUN fsck_ffs MANUALLY.
> THE FOLLOWING FILE SYSTEN HAD AN UNEXPECTED INCOSISTENCY:
> ffs: /dev/rsd0g(/var)
> Automatic File system check failed: help!
> Enter pathname of shell or RETURN for sh:
>
>
>
> I think this problem is for incompatibility with raid controler SAS5IR, but in
> the openbsd page say this hardware is support.
> I have two harddisk SATA Raid 1
You haven't convinced me of an actual problem here.
Your file system on sd0a is messed up (it happens when you have
lockups like you say you did) but why do you say it is not compatible?
Nick.
>
> dmesg
>
> OpenBSD 4.1-stable (GENERIC.MP) #0: Wed Oct 10 10:43:00 MDT 2007
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
> cpu0: Intel(R) Xeon(R) CPU 3050 @ 2.13GHz ("GenuineIntel" 686-class) 2.14 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
> H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
> xTPR
> real mem = 2146795520 (2096480K)
> avail mem = 1952034816 (1906284K)
> using 4278 buffers containing 107462656 bytes (104944K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+ BIOS, date 04/04/07, BIOS32 rev. 0 @ 0xffe90,
> SMBIOS rev. 2.4 @ 0xfa5b0 (48 entries)
> bios0: Dell Computer Corporation PowerEdge 860
> pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfba60/176 (9 entries)
> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801GB LPC" rev 0x00)
> pcibios0: PCI bus #7 is the last bus
> bios0: ROM list: 0xc0000/0x9000 0xc9000/0x1000 0xca000/0x5c00 0xd0000/0x1800
> 0xec000/0x4000!
> acpi at mainbus0 not configured
> ipmi0 at mainbus0: version 1.5 interface KCS iobase 0xca8/8 spacing 4
> mainbus0: Intel MP Specification (Version 1.4)
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: apic clock running at 266 MHz
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Xeon(R) CPU 3050 @ 2.13GHz ("GenuineIntel" 686-class) 2.14 GHz
> cpu1:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
> H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
> xTPR
> mainbus0: bus 0 is type PCI
> mainbus0: bus 1 is type PCI
> mainbus0: bus 2 is type PCI
> mainbus0: bus 3 is type PCI
> mainbus0: bus 4 is type PCI
> mainbus0: bus 5 is type PCI
> mainbus0: bus 6 is type PCI
> mainbus0: bus 7 is type PCI
> mainbus0: bus 8 is type ISA
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
> ioapic0: misconfigured as apic 0, remapped to apid 2
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel E7230 MCH" rev 0x00
> ppb0 at pci0 dev 1 function 0 "Intel E7230 PCIE" rev 0x00
> pci1 at ppb0 bus 1
> ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
> pci2 at ppb1 bus 2
> mpi0 at pci2 dev 8 function 0 "Symbios Logic SAS1068" rev 0x01: apic 2 int 16
> (irq 5)
> scsibus0 at mpi0: 112 targets
> sd0 at scsibus0 targ 0 lun 0: <Dell, VIRTUAL DISK, 1028> SCSI3 0/direct fixed
> sd0: 237464MB, 237464 cyl, 16 head, 128 sec, 512 bytes/sec, 486326272 sec
> total
> "Intel IOxAPIC" rev 0x09 at pci1 dev 0 function 1 not configured
> ppb2 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01
> pci3 at ppb2 bus 3
> ppb3 at pci3 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
> pci4 at ppb3 bus 4
> bnx0 at pci4 dev 0 function 0 "Broadcom BCM5708" rev 0x12: apic 2 int 16 (irq
> 5)
> ppb4 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01
> pci5 at ppb4 bus 5
> bge0 at pci5 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1
> (0x4101): apic 2 int 16 (irq 5), address 00:19:b9:f7:a7:0a
> brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
> ppb5 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01
> pci6 at ppb5 bus 6
> bge1 at pci6 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1
> (0x4101): apic 2 int 17 (irq 3), address 00:19:b9:f7:a7:0b
> brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
> uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 2 int 20
> (irq 11)
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0
> uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 2 int 21
> (irq 10)
> usb1 at uhci1: USB revision 1.0
> uhub1 at usb1
> uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 2 int 22
> (irq 6)
> usb2 at uhci2: USB revision 1.0
> uhub2 at usb2
> uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 2 int 20
> (irq 11)
> usb3 at ehci0: USB revision 2.0
> uhub3 at usb3
> uhub3: Intel EHCI root hub, rev 2.00/1.00, addr 1
> uhub3: 6 ports with 6 removable, self powered
> ppb6 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xe1
> pci7 at ppb6 bus 7
> vga1 at pci7 dev 5 function 0 "ATI ES1000" rev 0x02
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM disabled
> pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0
> configured to compatibility, channel 1 configured to compatibility
> atapiscsi0 at pciide0 channel 0 drive 0
> scsibus1 at atapiscsi0: 2 targets
> cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, CDRW/DVD GCCT10N, A102> SCSI0 5/cdrom
> removable
> cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> pciide0: channel 1 ignored (disabled)
> ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01pci_intr_map:
> bus 0 dev 31 func 3 pin 2; line 3
> pci_intr_map: no MP mapping found
> : irq 3
> iic0 at ichiic0: disabled to avoid ipmi0 interactions
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pmsi0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pmsi0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pctr: 686-class user-level performance counters enabled
> mtrr: Pentium Pro MTRR support
> uhub4 at uhub3 port 3
> uhub4: Cypress Semiconductor USB2 Hub, rev 2.00/0.0b, addr 2
> uhub4: 4 ports with 4 removable, self powered, multiple transaction
> translators
> dkcsum: sd0 matches BIOS drive 0x80
> root on sd0a
> rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
> bnx0: address 00:10:18:28:41:8a
> brgphy2 at bnx0 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6
>
> Any suggestions?
>
> Thank,
> Christian
