Re: Problem with raid 1 in server dell

José Christian Rodríguez Thu, 25 Oct 2007 13:14:30 -0700

I apologize for saying it is not compatible but i don't know exactly what isthe problem.

I had another dell server running without problem, when it was replaced bythe new server with a raid controller, gives these

problems of inconsistency disk and freeze.

Something that no comment was that the server has a Dual Core Intel Xeonprocessor, I read that these processors have manymistakes but that some people have used without problem with openbsd, Doesthis could be the cause of freezing and the inconsistency in the disk?


Thank you,

Christian

----- Original Message -----From: "Nick Holland" <[EMAIL PROTECTED]>

To: "misc" <misc@openbsd.org>
Sent: Wednesday, October 24, 2007 6:58 PM
Subject: Re: Problem with raid 1 in server dell

Josi Christian Rodrmguez wrote:

Hi list,
My system was freeze and when reboot show:

/dev/rsd0a: file system is clean;not checking
/dev/rsd0d: file system is clean;not checking
/dev/rsd0e: file system is clean;not checking
/dev/rsd0g: INCORRECT BLOCK COUNT I=2699655 (20 should be 16) (CORRECTED)
PARTIALLY TRUNCATED INODE I=19268881
/dev/rsd0g:UNEXPECTED INCONSISTENCY; RUN fsck_ffs MANUALLY.
THE FOLLOWING FILE SYSTEN HAD AN UNEXPECTED INCOSISTENCY:
     ffs: /dev/rsd0g(/var)
Automatic File system check failed: help!
Enter pathname of shell or RETURN for sh:

I think this problem is for incompatibility with raid controler SAS5IR,but in

the openbsd page say this hardware is support.
I have two harddisk SATA  Raid 1


You haven't convinced me of an actual problem here.
Your file system on sd0a is messed up (it happens when you have
lockups like you say you did) but why do you say it is not compatible?

Nick.


dmesg

OpenBSD 4.1-stable (GENERIC.MP) #0: Wed Oct 10 10:43:00 MDT 2007
    [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP

cpu0: Intel(R) Xeon(R) CPU 3050 @ 2.13GHz ("GenuineIntel" 686-class) 2.14GHz

cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
xTPR
real mem  = 2146795520 (2096480K)
avail mem = 1952034816 (1906284K)
using 4278 buffers containing 107462656 bytes (104944K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+ BIOS, date 04/04/07, BIOS32 rev. 0 @ 0xffe90,
SMBIOS rev. 2.4 @ 0xfa5b0 (48 entries)
bios0: Dell Computer Corporation PowerEdge 860
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfba60/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801GB LPC" rev 0x00)
pcibios0: PCI bus #7 is the last bus

bios0: ROM list: 0xc0000/0x9000 0xc9000/0x1000 0xca000/0x5c000xd0000/0x1800

0xec000/0x4000!
acpi at mainbus0 not configured
ipmi0 at mainbus0: version 1.5 interface KCS iobase 0xca8/8 spacing 4
mainbus0: Intel MP Specification (Version 1.4)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 266 MHz
cpu1 at mainbus0: apid 1 (application processor)

cpu1: Intel(R) Xeon(R) CPU 3050 @ 2.13GHz ("GenuineIntel" 686-class) 2.14GHz

cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
xTPR
mainbus0: bus 0 is type PCI
mainbus0: bus 1 is type PCI
mainbus0: bus 2 is type PCI
mainbus0: bus 3 is type PCI
mainbus0: bus 4 is type PCI
mainbus0: bus 5 is type PCI
mainbus0: bus 6 is type PCI
mainbus0: bus 7 is type PCI
mainbus0: bus 8 is type ISA
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel E7230 MCH" rev 0x00
ppb0 at pci0 dev 1 function 0 "Intel E7230 PCIE" rev 0x00
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci2 at ppb1 bus 2

mpi0 at pci2 dev 8 function 0 "Symbios Logic SAS1068" rev 0x01: apic 2int 16

(irq 5)
scsibus0 at mpi0: 112 targets

sd0 at scsibus0 targ 0 lun 0: <Dell, VIRTUAL DISK, 1028> SCSI3 0/directfixed

sd0: 237464MB, 237464 cyl, 16 head, 128 sec, 512 bytes/sec, 486326272 sec
total
"Intel IOxAPIC" rev 0x09 at pci1 dev 0 function 1 not configured
ppb2 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01
pci3 at ppb2 bus 3
ppb3 at pci3 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
pci4 at ppb3 bus 4

bnx0 at pci4 dev 0 function 0 "Broadcom BCM5708" rev 0x12: apic 2 int 16(irq

5)
ppb4 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01
pci5 at ppb4 bus 5
bge0 at pci5 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1
(0x4101): apic 2 int 16 (irq 5), address 00:19:b9:f7:a7:0a
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb5 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01
pci6 at ppb5 bus 6
bge1 at pci6 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1
(0x4101): apic 2 int 17 (irq 3), address 00:19:b9:f7:a7:0b
brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0

uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 2 int20

(irq 11)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered

uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 2 int21

(irq 10)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered

uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 2 int22

(irq 6)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered

ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 2 int20

(irq 11)
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
ppb6 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xe1
pci7 at ppb6 bus 7
vga1 at pci7 dev 5 function 0 "ATI ES1000" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)

ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PMdisabledpciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA,channel 0

configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets

cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, CDRW/DVD GCCT10N, A102> SCSI05/cdrom

removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)

ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev0x01pci_intr_map:

bus 0 dev 31 func 3 pin 2; line 3
pci_intr_map: no MP mapping found
: irq 3
iic0 at ichiic0: disabled to avoid ipmi0 interactions
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
uhub4 at uhub3 port 3
uhub4: Cypress Semiconductor USB2 Hub, rev 2.00/0.0b, addr 2
uhub4: 4 ports with 4 removable, self powered, multiple transaction
translators
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
bnx0: address 00:10:18:28:41:8a
brgphy2 at bnx0 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6

Any suggestions?

Thank,

Christian

Re: Problem with raid 1 in server dell

Reply via email to