Use -current, it has some critical fixes for this chip, thanks to
reyk.
#ifconfig -a
lo0: flags=8008<LOOPBACK,MULTICAST> mtu 33208
groups: lo
ath0: flags=8822<BROADCAST,NOTRAILERS,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:15:af:3f:70:3b
groups: wlan
media: IEEE802.11 autoselect
status: no network
ieee80211: nwid ""
#ifconfig ath0 up
ath0: unable to reset hardware; hal status 0
I'm not sure what ^^ means, I had a quick play and couldn't get the
wireless to work. Feel free to let me know where I'm going wrong :)
dmesg from latest bsd.rd snapshot:
OpenBSD 4.2-current (RAMDISK_CD) #532: Tue Nov 13 08:24:10 MST 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel(R) Celeron(R) M processor 900MHz ("GenuineIntel" 686-
class) 631 MHz
cpu0:
FPU
,V86
,DE
,PSE
,TSC
,MSR
,MCE
,CX8
,APIC
,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF
real mem = 527527936 (503MB)
avail mem = 504049664 (480MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 10/17/07, BIOS32 rev. 0 @
0xf0010, SMBIOS rev. 2.5 @ 0xf06c0 (37 entries)
bios0: vendor American Megatrends Inc. version "0401" date 10/17/2007
bios0: ASUSTeK Computer INC. 701
pcibios0 at bios0: rev 3.0 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf76a0/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801FB LPC" rev
0x00)
pcibios0: PCI bus #5 is the last bus
bios0: ROM list: 0xc0000/0xf800!
acpi at mainbus0 not configured
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82915GM/PM/GMS Host" rev 0x04
vga1 at pci0 dev 2 function 0 "Intel 82915GM/GMS Video" rev 0x04
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
"Intel 82915GM/GMS Video" rev 0x04 at pci0 dev 2 function 1 not
configured
"Intel 82801FB HD Audio" rev 0x04 at pci0 dev 27 function 0 not
configured
ppb0 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x04
pci1 at ppb0 bus 4
ppb1 at pci0 dev 28 function 1 "Intel 82801FB PCIE" rev 0x04
pci2 at ppb1 bus 3
vendor "Attansic Technology", unknown product 0x2048 (class network
subclass ethernet, rev 0xa0) at pci2 dev 0 function 0 not configured
ppb2 at pci0 dev 28 function 2 "Intel 82801FB PCIE" rev 0x04
pci3 at ppb2 bus 1
ath0 at pci3 dev 0 function 0 "Atheros AR5424" rev 0x01: irq 10
ath0: AR5424 14.2 phy 7.0 rf 0.0, WOR0W, address 00:15:af:3f:70:3b
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x04: irq 7
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x04: irq 3
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x04: irq 10
uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x04: irq 5
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd4
pci4 at ppb3 bus 5
ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x04: PM
disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801FBM SATA" rev 0x04: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 1 drive 0: <SILICONMOTION SM223AC>
wd0: 1-sector PIO, LBA, 3815MB, 7815024 sectors
wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 4
"Intel 82801FB SMBus" rev 0x04 at pci0 dev 31 function 3 not configured
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb1 at uhci1: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci2: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci3: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask fffd netmask fffd ttymask ffff
rd0: fixed, 3800 blocks
"vendor 0xeb1a product 0x2761" rev 2.00/8.21 addr 2 at uhub3 port 2
not configured
umass0 at uhub1 port 1 configuration 1 interface 0 "vendor 0x3538 USB
Mass Storage Device" rev 2.00/1.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets
sd0 at scsibus0 targ 1 lun 0: <aigo USB, Storage Device, 0.00> SCSI2 0/
direct removable
sd0: 984MB, 125 cyl, 255 head, 63 sec, 512 bytes/sec, 2015232 sec total
umass1 at uhub2 port 1 configuration 1 interface 0 "ENE UB6225" rev
2.00/1.00 addr 2
umass1: using SCSI over Bulk-Only
scsibus1 at umass1: 2 targets
sd1 at scsibus1 targ 1 lun 0: <USB2.0, CardReader SD0, 0100> SCSI0 0/
direct removable
sd1: drive offline
dkcsum: wd0 matches BIOS drive 0x81
dkcsum: sd0 matches BIOS drive 0x80
root on rd0a swap on rd0b dump on rd0b
WARNING: R/W mount of /mnt denied. Filesystem is not clean - run fsck
WARNING: /mnt was not properly unmounted
