I'll test it as soon as I get a chance, currently my laptop gets a page
fault and enters ddb during boot :-/
Also, I could not apply your diff on -current. Below is an updated diff.
BR,
Markus
--- sys/dev/usb/umsm.c.orig Wed Dec 12 22:21:44 2007
+++ sys/dev/usb/umsm.c Wed Dec 12 22:14:21 2007
@@ -58,6 +58,7 @@
{ USB_VENDOR_AIRPRIME, USB_PRODUCT_AIRPRIME_PC5220 },
{ USB_VENDOR_DELL, USB_PRODUCT_DELL_W5500 },
{ USB_VENDOR_KYOCERA2, USB_PRODUCT_KYOCERA2_KPC650 },
+ { USB_VENDOR_HUAWEI, USB_PRODUCT_HUAWEI_E220 },
{ USB_VENDOR_NOVATEL, USB_PRODUCT_NOVATEL_EXPRESSCARD },
{ USB_VENDOR_NOVATEL, USB_PRODUCT_NOVATEL_MERLINV620 },
{ USB_VENDOR_NOVATEL, USB_PRODUCT_NOVATEL_S720 },
@@ -119,6 +120,25 @@
bzero(&uca, sizeof(uca));
sc->sc_udev = uaa->device;
+
+ if(uaa->product == USB_PRODUCT_HUAWEI_E220) {
+ usb_device_request_t req;
+ usbd_status err;
+
+ req.bmRequestType = UT_WRITE_DEVICE;
+ req.bRequest = UR_SET_FEATURE;
+ USETW(req.wValue, 1);
+ USETW(req.wIndex, 0);
+ USETW(req.wLength, 0);
+ err = usbd_do_request(sc->sc_udev, &req, 0);
+
+ if (err) {
+ printf("%s: failed to initialize device ",
+ sc->sc_dev.dv_xname);
+ sc->sc_dying = 1;
+ return;
+ }
+ }
if (usbd_set_config_index(sc->sc_udev, UMSM_CONFIG_NO, 1) != 0) {
printf("%s: could not set configuration no\n",
--- share/man/man4/umsm.4.orig Wed Dec 12 22:22:33 2007
+++ share/man/man4/umsm.4 Wed Dec 12 22:15:01 2007
@@ -38,6 +38,7 @@
.Bl -column "Device " "Bus" -compact -offset 6n
.It Em "Device Bus"
.It Li "AirPrime PC5220" Ta Ta CardBus
+.It Li "Huawei Mobile E220" Ta Ta USB
.It Li "Kyocera KPC650" Ta Ta CardBus
.It Li "Novatel Wireless ES620" Ta Ta USB
.It Li "ONDA Communication H600" Ta Ta CardBus
Felix Kronlage wrote:
On Tue, Dec 11, 2007 at 04:58:18PM +0100, [EMAIL PROTECTED]@mgedv.net wrote:
i'm currently testing the c-code which is provided there (i'm not
a guru) but the first one does not look that bad (there are some
errors and problems which i do not really have the time right now
to look into).
attached diff sends the proper message to the device to cause the
ucom port to appear. I still have the problem, that sometimes talking
to the ucom will cause the device to reset itself, I have not figured
out what is causing that.
felix
