On Tue, Jan 08, 2008 at 10:22:04PM -0800, William Sloan wrote: > OpenBSD 4.2-stable (RAID) #3: Mon Jan 7 17:45:05 PST 2008 > [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAID > cpu0: Geode(TM) Integrated Processor by National Semi ("Geode by NSC" [...] > root on wd0a swap on wd0b dump on wd0b > raid0: Component /dev/sd0a being configured at row: 0 col: 0 > Row: 0 Column: 0 Num Rows: 1 Num Columns: 2 > Version: 2 Serial Number: 123456 Mod Counter: 638 > Clean: Yes Status: 0 > raid0: Component /dev/sd1a being configured at row: 0 col: 1 > Row: 0 Column: 1 Num Rows: 1 Num Columns: 2 > Version: 2 Serial Number: 123456 Mod Counter: 638 > Clean: Yes Status: 0 > raid0 at root
It looks like you're booting a kernel that was compiled without the RAID_AUTOCONFIG option set. The system boot script will automatically configure raid0 if the file /etc/raid0.conf (on wd0) exists, so that explains why raid0 gets configured after the location of the root filesystem is determined. Try recompiling a kernel with RAID_AUTOCONFIG set, and boot from that. Don't create an /etc/raid0.conf. Not in /etc on wd0, and not in /etc on raid0. Do create one on another location on wd0 though, it might come in handy later. -- Jurjen Oskam Savage's Law of Expediency: You want it bad, you'll get it bad.