Sorry for the noise. >> OpenBSD/amd64 BOOT 3.00 boot> bsd.rd booting hd0a:bsd.rd: 2443520+502511+2783592+0+458480 [80+250848+156426]=0xa4a9 2c entry point at 0x1001e0 [7205c766, 34000004, 24448b12, 820a304]*Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2008 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 4.3-current (RAMDISK_CD) #1413: Tue Apr 1 05:52:38 MDT 2008 [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/RAMDISK_CD real mem = 1073278976 (1023MB) avail mem = 1031704576 (983MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xf0100 (39 entries) bios0: vendor Award Software International, Inc. version "F6" date 01/04/2006 bios0: Gigabyte Technology Co., Ltd. 8I945G acpi0 at bios0: rev 0, can't enable ACPI cpu0 at mainbus0: (uniprocessor) cpu0: Intel(R) Pentium(R) 4 CPU 3.00GHz, 3014.88 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36, CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,CNXT-ID, C X16,xTPR,LONG cpu0: 2MB 64b/line 8-way L2 cache pci0 at mainbus0 bus 0: configuration mode 1 pchb0 at pci0 dev 0 function 0 "Intel 82945G Host" rev 0x02 ppb0 at pci0 dev 1 function 0 "Intel 82945G PCIE" rev 0x02: irq 3 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 "NVIDIA GeForce 6600" rev 0xa2 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) "Intel 82801GB HD Audio" rev 0x01 at pci0 dev 27 function 0 not configured ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: irq 3 pci2 at ppb1 bus 2 ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x01: irq 5 pci3 at ppb2 bus 3 bge0 at pci3 dev 0 function 0 "Broadcom BCM5789" rev 0x11, BCM5750 B1 (0x4101) : irq 5, address [snip] brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0 uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: irq 9 uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: irq 11 uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: irq 5 uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: irq 3 ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: irq 9 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb3 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xe1 pci4 at ppb3 bus 4 pciide0 at pci4 dev 6 function 0 "ITExpress IT8212F" rev 0x13: DMA, channel 0 wired to native-PCI, channel 1 wired to native-PCI pciide0: using irq 10 for native-PCI interrupt wd0 at pciide0 channel 0 drive 0: <Maxtor 6L300R0> wd0: 16-sector PIO, LBA48, 286188MB, 586114704 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6 atapiscsi0 at pciide0 channel 1 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVDRAM GSA-H10A, JL02> SCSI0 5/cdrom removable cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 "Intel 82801GB LPC" rev 0x01 at pci0 dev 31 function 0 not configured pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility wd1 at pciide1 channel 0 drive 0: <HDS728080PLAT20> wd1: 16-sector PIO, LBA48, 78533MB, 160836480 sectors wd1(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6 "Intel 82801GB SMBus" rev 0x01 at pci0 dev 31 function 3 not configured usb1 at uhci0: USB revision 1.0 uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci2: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci3: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at mainbus0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo com0: console pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 rd0: fixed, 4480 blocks umass0 at uhub0 port 5 configuration 1 interface 0 "I-O DATA HDC-U" rev 2.00/7 .34 addr 2 umass0: using SCSI over Bulk-Only scsibus1 at umass0: 2 targets sd0 at scsibus1 targ 1 lun 0: <I-O DATA, HDC-U, 7.34> SCSI0 0/direct fixed sd0: 305245MB, 38913 cyl, 255 head, 63 sec, 512 bytes/sec, 625142448 sec total uhidev0 at uhub4 port 2 configuration 1 interface 0 "vendor 0x05af product 0x0 507" rev 1.10/1.60 addr 2 uhidev0: iclass 3/1 ukbd0 at uhidev0 wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 uhidev1 at uhub4 port 2 configuration 1 interface 1 "vendor 0x05af product 0x0 507" rev 1.10/1.60 addr 2 uhidev1: iclass 3/0, 3 report ids uhid at uhidev1 reportid 2 not configured uhid at uhidev1 reportid 3 not configured wd1c: aborted command, interface CRC error reading fsbn 0 (wd1 bn 0; cn 0 tn 0 sn 0), retrying wd1: transfer error, downgrading to Ultra-DMA mode 5 wd1(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5 wd1c: aborted command, interface CRC error reading fsbn 0 (wd1 bn 0; cn 0 tn 0 sn 0), retrying wd1: soft error (corrected) root on rd0a swap on rd0b dump on rd0b WARNING: file system time much less than clock time erase ^?, werase ^W, kill ^U, intr ^C, status ^T (I)nstall, (U)pgrade or (S)hell?