Hello all.
A few days ago finally I almost fell-in-love - got ThinkPad X60 Tablet.
WinXP partition resized to 15GB, OpenBSD installed... And here we begin:
- GENERIC and GENERIC.MP work OK (Opera still crashes on MP as usual...
well, my hopes belong to gnash today).
- All network works fine (but Wi-Fi tested lightly, see below).
- BlueTooth (after customizing kernel and installing bluetooth-tools)
works OK, tested many times.
- azalia(4) playing works OK, both internal and extrnal (hardware mixer,
if it's matter); recording not tested yet.
- Power Management works except suspend/sleep. I'm suspecting it's
related to that:
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
- Keyboard and pseudomouse:) work OK.
- Pen doesn't work at all. Windows say it's connected to the LPC chip
mentioned above. Does this mean that I have to write a driver for it
(and modify wscons framework to support touch strength, and then modify
Xorg wscons driver, BTW removing usbtablet(4))? Looks like nice effort
for me, but'll take a lot of time...
- Buttons near display (are actual in the tablet mode) do not work
either. Windows says they're connected in parallel to pen device.
- sysutils/tpb works OK.
- sysutils/tphdisk not tested (and unlikely to be until Windows finally
gone from this laptop).
- external video not tested yet.
- USB works OK (tested with ubt(4) and umass(4)).
- cardbus(4) not tested.
- FireWire and finger scanner are not supported and do not work either.
BTW, does anyone have any docs for the last one (see dmesg for more
info)?
- No kernel panics discovered. :)
Also I bought D-Link DWL-AG530 for desktop PC, because someone said
(cannot discover that letter now:( ) it's Atheros 5212-based, which is
supported. Damned me, I messed up ral(4) and ath(4) in my mind, and
bought a card from a manufacturer which do not support OpenBSD... :( And
I run in a problem that either man in the letter made a typo (530
instead 520), or D-Link "slightly" changed chip. Novadays it's based on
5213, which fails to initialize or doesn't work either. Sample dmesg
output (from different boots):
ath0 at pci0 dev 11 function 0 "Atheros AR5413" rev 0x01: irq 11
ath0: AR5413 10.5 phy 6.1 rf 6.3, FCC2A*, address 00:1c:f0:19:aa:66
ath0: ath_chan_set: unable to reset channel 52 (5260 MHz)
ath0: unable to reset hardware; hal status 3618911128
ath0: unable to reset hardware; hal status 3520943048
ath0: unable to reset hardware; hal status 3520945608
ath0: unable to reset hardware; hal status 3520946120
ath0: unable to reset hardware; hal status 0
ath0: unable to reset hardware; hal status 3485396992
ath0: unable to reset hardware; hal status 0
ath0: unable to reset hardware; hal status 3618274072
---
ath0 at pci0 dev 11 function 0 "Atheros AR5213 (D-Link DWL-AG530)" rev 0x01:
irq 11
ath0: unable to attach hardware; HAL status 22
---
ath0 at pci0 dev 11 function 0 "Atheros AR5413" rev 0x01: irq 11
ath0: AR5413 10.5 phy 6.1 rf 6.3, FCC2A*, address 00:1c:f0:19:aa:66
ath0: bogus xmit rate 0x0 (idx 0x7)
ath0: bogus xmit rate 0x0 (idx 0x7)
ath0: bogus xmit rate 0x0 (idx 0x7)
When I played with this card and driver, forcing detecting it as 5212
(second sample output), I saw message saying "failed to resume the
AR5212 (again)", see sys/dev/ic/ar5212.c line 334 (I played with
incrementing loop count and sleep time there, without luck). Do not
remember HAL status though, but it was consistent; may try again of
course if it's needed.
A few minutes ago, while I was writing this, it freezed (no panic) whole
PC after a few "ifconfig ath0 media xxx" and "ifconfig ath0" commands. I
have no AP around there, so I cannot ever say, does it work in BSS mode,
but in hostap mode it doesn't (even when status is "active"). But I'm
newbie in Wi-Fi at all, maybe I missed something...
So, now I want to fix problems mentioned above (no pen, no pen-around
buttons, no suspend/resume, no ath(4)), and I can dig somethere - if
anyone could give a direction. Direction (or something more:) ) will be
very appreciated, and I hope I'll can really help the project (and
myself :) ).
(X60 dmesg below, didn't sent to www@ until I got situation clear; not
a GENERIC because BlueTooth needed, also enabled ACPI_VERBOSE and
NTFS options).
--
Best wishes,
Vadim Zhukov
OpenBSD 4.3-current (GD.MP) #0: Wed Apr 9 22:19:14 MSD 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GD.MP
cpu0: Intel(R) Core(TM) Duo CPU L2500 @ 1.83GHz ("GenuineIntel" 686-class) 1.83
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,VMX,EST,TM2,xTPR
real mem = 1063677952 (1014MB)
avail mem = 1020264448 (973MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 04/18/07, BIOS32 rev. 0 @ 0xfd690, SMBIOS
rev. 2.4 @ 0xe0010 (64
entries)
bios0: vendor LENOVO version "7JET23WW (1.08 )" date 04/18/2007
bios0: LENOVO 636464G
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP SSDT ECDT TCPA APIC MCFG HPET SLIC BOOT SSDT SSDT SSDT
SSDT
acpi0: wakeup devices LID_(S3) SLPB(S3) DURT(S3) EXP0(S4) EXP1(S4) EXP2(S4)
EXP3(S4) PCI1(S4) USB0(S3) USB1
(S3) USB2(S3) USB7(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpi device at acpi0 from table DSDT not configured
acpi device at acpi0 from table FACP not configured
acpi device at acpi0 from table SSDT not configured
acpi device at acpi0 from table ECDT not configured
acpi device at acpi0 from table TCPA not configured
acpimadt0 at acpi0 table APIC addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 166MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) Duo CPU L2500 @ 1.83GHz ("GenuineIntel" 686-class) 1.83
GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,VMX,EST,TM2,xTPR
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: duplicate apic id, remapped to apid 2
acpi device at acpi0 from table MCFG not configured
acpihpet0 at acpi0 table HPET: 14318179 Hz
acpi device at acpi0 from table SLIC not configured
acpi device at acpi0 from table BOOT not configured
acpi device at acpi0 from table SSDT not configured
acpi device at acpi0 from table SSDT not configured
acpi device at acpi0 from table SSDT not configured
acpi device at acpi0 from table SSDT not configured
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (AGP_)
acpiprt2 at acpi0: bus 2 (EXP0)
acpiprt3 at acpi0: bus 3 (EXP1)
acpiprt4 at acpi0: bus 4 (EXP2)
acpiprt5 at acpi0: bus 12 (EXP3)
acpiprt6 at acpi0: bus 21 (PCI1)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2
acpicpu1 at acpi0: C3, C2
acpitz0 at acpi0: critical temperature 127 degC
acpitz1 at acpi0: critical temperature 97 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibat0 at acpi0: BAT0 model "93P5032" serial 1132 type LION oem "SANYO"
acpibat1 at acpi0: BAT1 not present
acpibat2 at acpi0: BAT2 not present
acpiac0 at acpi0: AC unit offline
acpidock at acpi0 not configured
bios0: ROM list: 0xc0000/0xea00! 0xcf000/0x1000 0xd0000/0x1000 0xdc000/0x4000!
0xe0000/0x10000!
cpu0: unknown Enhanced SpeedStep CPU, msr 0x06130b1d06000613
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 1000 MHz (1004 mV): speeds: 1833, 1000 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
agp0 at vga1: aperture at 0xd0000000, size 0x10000000
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: apic 2 int
17 (irq 11)
azalia0: codec[s]: Analog Devices/0x1981, Conexant/0x2bfa, using Analog
Devices/0x1981
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 2 int 20
(irq 11)
pci1 at ppb0 bus 2
em0 at pci1 dev 0 function 0 "Intel PRO/1000MT (82573L)" rev 0x00: apic 2 int
16 (irq 11), address
00:16:d3:39:d0:d7
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 2 int 21
(irq 11)
pci2 at ppb1 bus 3
wpi0 at pci2 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: apic 2 int
17 (irq 11), MoW2, address
00:1c:bf:02:4e:55
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 2 int 22
(irq 11)
pci3 at ppb2 bus 4
ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: apic 2 int 23
(irq 11)
pci4 at ppb3 bus 12
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 2 int 16
(irq 11)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 2 int 17
(irq 11)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 2 int 18
(irq 11)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 2 int 19
(irq 11)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 2 int 19
(irq 11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci5 at ppb4 bus 21
cbb0 at pci5 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xb4: apic 2 int 16
(irq 11)
"Ricoh 5C552 Firewire" rev 0x09 at pci5 dev 0 function 1 not configured
sdhc0 at pci5 dev 0 function 2 "Ricoh 5C822 SD/MMC" rev 0x18: apic 2 int 18
(irq 11)
sdmmc0 at sdhc0
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 22 device 0 cacheline 0x0, lattimer 0xb0
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA, channel 0
configured to compatibility,
channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 ignored (disabled)
ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x02: apic 2 int 16
(irq 11), AHCI 1.1
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, FUJITSU MHW2080B, 0084> SCSI3 0/direct fixed
sd0: 76319MB, 9729 cyl, 255 head, 63 sec, 512 bytes/sec, 156301488 sec total
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 2 int 23
(irq 11)
iic0 at ichiic0
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
ugen0 at uhub4 port 1 "STMicroelectronics Biometric Coprocessor" rev 1.00/0.01
addr 2
ubt0 at uhub3 port 1 "Cambridge Silicon Radio Bluetooth" rev 2.00/31.64 addr 2
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
