Hello, With the BIOS's compatibility mode disabled, the -current ahci0 has trouble finding my DVD on a cold boot. Linux can see it, however.
Exerpts first: Cold boot, compatibility mode disabled: ahci0 at pci0 dev 31 function 2 "Intel 82801H AHCI" rev 0x02: apic 2 int 19 (irq 11), AHCI 1.1 scsibus0 at ahci0: 32 targets sd0 at scsibus0 targ 0 lun 0: <ATA, SAMSUNG HD501LJ, CR10> SCSI3 0/direct fixed sd0: 476940MB, 60801 cyl, 255 head, 63 sec, 512 bytes/sec, 976773168 sec total ahci0: stopping the port, softreset slot 2 was still active. atascsi_atapi_cmd_done, timeout ahci0: stopping the port, softreset slot 4 was still active. atascsi_atapi_cmd_done, timeout ahci0: stopping the port, softreset slot 6 was still active. atascsi_atapi_cmd_done, timeout Warm boot, switching to compatibility mode: pciide1 at pci0 dev 31 function 2 "Intel 82801H SATA" rev 0x02: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide1: using apic 2 int 19 (irq 11) for native-PCI interrupt wd0 at pciide1 channel 0 drive 0: <SAMSUNG HD501LJ> wd0: 16-sector PIO, LBA48, 476940MB, 976773168 sectors wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5 atapiscsi0 at pciide1 channel 1 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <LITE-ON, DVDRW LH-20A1S, 9L03> ATAPI 5/cdrom removable cd0(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5 Second warm boot, compatibility mode disabled again: ahci0 at pci0 dev 31 function 2 "Intel 82801H AHCI" rev 0x02: apic 2 int 19 (irq 11), AHCI 1.1 scsibus0 at ahci0: 32 targets sd0 at scsibus0 targ 0 lun 0: <ATA, SAMSUNG HD501LJ, CR10> SCSI3 0/direct fixed sd0: 476940MB, 60801 cyl, 255 head, 63 sec, 512 bytes/sec, 976773168 sec total cd0 at scsibus0 targ 1 lun 0: <LITE-ON, DVDRW LH-20A1S, 9L03> ATAPI 5/cdrom removable There it is! Something about this sequence makes ahci0 happy, because this is the only way I can get it to see the DVD. Any ideas or cluebats? Full dmesgs: Cold boot, compatibility mode disabled: OpenBSD 4.3-current (GENERIC.MP) #31: Tue May 13 06:18:09 PDT 2008 [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 3462197248 (3301MB) avail mem = 3347341312 (3192MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe32f0 (39 entries) bios0: vendor Intel Corp. version "MQ96510J.86A.1709.2007.1010.1926" date 10/10/2007 bios0: Intel Corporation DG965RY acpi0 at bios0: rev 0 acpi0: tables DSDT FACP APIC WDDT MCFG ASF! HPET SSDT SSDT SSDT SSDT SSDT acpi0: wakeup devices SLPB(S4) P32_(S4) UAR1(S4) UAR2(S4) ILAN(S4) PEGP(S4) PEX0(S4) PEX1(S4) PEX2(S4) PEX3(S4) PEX4(S4) PEX5(S4) UHC1(S3) UHC2(S3) UHC3(S3) UHC4(S3) EHCI(S3) EHC2(S3) UH42(S3) UHC5(S3) AZAL(S3) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz, 2397.88 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR,NXE,LONG cpu0: 4MB 64b/line 16-way L2 cache cpu0: apic clock running at 266MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz, 2397.61 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR,NXE,LONG cpu1: 4MB 64b/line 16-way L2 cache ioapic0 at mainbus0 apid 2 pa 0xfec00000, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 2 acpihpet0 at acpi0: 14318179 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 6 (P32_) acpiprt2 at acpi0: bus 1 (PEX0) acpiprt3 at acpi0: bus 2 (PEX1) acpiprt4 at acpi0: bus 3 (PEX2) acpiprt5 at acpi0: bus 4 (PEX3) acpiprt6 at acpi0: bus 5 (PEX4) acpiprt7 at acpi0: bus -1 (PEX5) acpicpu0 at acpi0: FVS, 2394, 1596 MHz acpicpu1 at acpi0: FVS, 2394, 1596 MHz acpibtn0 at acpi0: SLPB pci0 at mainbus0 bus 0: configuration mode 1 pchb0 at pci0 dev 0 function 0 "Intel 82G965 Host" rev 0x02 vga1 at pci0 dev 2 function 0 "Intel 82G965 Video" rev 0x02 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) agp0 at vga1: aperture at 0xd0000000, size 0x10000000 "Intel 82G965 Video" rev 0x02 at pci0 dev 2 function 1 not configured "Intel 82G965 HECI" rev 0x02 at pci0 dev 3 function 0 not configured em0 at pci0 dev 25 function 0 "Intel ICH8 IGP C" rev 0x02: apic 2 int 20 (irq 9), address 00:19:d1:70:4d:73 uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x02: apic 2 int 16 (irq 11) uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x02: apic 2 int 21 (irq 10) ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x02: apic 2 int 18 (irq 11) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x02: apic 2 int 22 (irq 9) azalia0: codec[s]: Sigmatel/0x7618 audio0 at azalia0 ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x02: apic 2 int 17 (irq 255) pci1 at ppb0 bus 1 ppb1 at pci0 dev 28 function 1 "Intel 82801H PCIE" rev 0x02: apic 2 int 16 (irq 255) pci2 at ppb1 bus 2 pciide0 at pci2 dev 0 function 0 "Marvell 88SE6101 IDE" rev 0xb1: DMA (unsupported), channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide0: using apic 2 int 17 (irq 10) for native-PCI interrupt pciide0: channel 0 ignored (not responding; disabled or no drives?) pciide0: channel 1 ignored (not responding; disabled or no drives?) ppb2 at pci0 dev 28 function 2 "Intel 82801H PCIE" rev 0x02: apic 2 int 18 (irq 255) pci3 at ppb2 bus 3 ppb3 at pci0 dev 28 function 3 "Intel 82801H PCIE" rev 0x02: apic 2 int 19 (irq 255) pci4 at ppb3 bus 4 ppb4 at pci0 dev 28 function 4 "Intel 82801H PCIE" rev 0x02: apic 2 int 17 (irq 255) pci5 at ppb4 bus 5 uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x02: apic 2 int 23 (irq 11) uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x02: apic 2 int 19 (irq 11) uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x02: apic 2 int 18 (irq 11) ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x02: apic 2 int 23 (irq 11) usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb5 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xf2 pci6 at ppb5 bus 6 pcib0 at pci0 dev 31 function 0 "Intel 82801H LPC" rev 0x02 ahci0 at pci0 dev 31 function 2 "Intel 82801H AHCI" rev 0x02: apic 2 int 19 (irq 11), AHCI 1.1 scsibus0 at ahci0: 32 targets sd0 at scsibus0 targ 0 lun 0: <ATA, SAMSUNG HD501LJ, CR10> SCSI3 0/direct fixed sd0: 476940MB, 60801 cyl, 255 head, 63 sec, 512 bytes/sec, 976773168 sec total ahci0: stopping the port, softreset slot 2 was still active. atascsi_atapi_cmd_done, timeout ahci0: stopping the port, softreset slot 4 was still active. atascsi_atapi_cmd_done, timeout ahci0: stopping the port, softreset slot 6 was still active. atascsi_atapi_cmd_done, timeout ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x02: apic 2 int 21 (irq 10) iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-6400CL5 spdmem1 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-6400CL5 spdmem2 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-6400CL5 spdmem3 at iic0 addr 0x53: 1GB DDR2 SDRAM non-parity PC2-6400CL5 usb2 at uhci0: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci1: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci2: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb5 at uhci3: USB revision 1.0 uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb6 at uhci4: USB revision 1.0 uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 uhidev0 at uhub5 port 1 configuration 1 interface 0 "Logitech Trackball" rev 1.10/2.20 addr 2 uhidev0: iclass 3/1 ums0 at uhidev0: 3 buttons, Z dir wsmouse0 at ums0 mux 0 softraid0 at root root on sd0a swap on sd0b dump on sd0b kqemu: kqemu version 0x00010300 loaded, max locked mem=1690524kB DDB symbols added: 402840 bytes Warm boot, switching to compatibility mode: OpenBSD 4.3-current (GENERIC.MP) #31: Tue May 13 06:18:09 PDT 2008 [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 3462279168 (3301MB) avail mem = 3347423232 (3192MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe32f0 (39 entries) bios0: vendor Intel Corp. version "MQ96510J.86A.1709.2007.1010.1926" date 10/10/2007 bios0: Intel Corporation DG965RY acpi0 at bios0: rev 0 acpi0: tables DSDT FACP APIC WDDT MCFG ASF! HPET SSDT SSDT SSDT SSDT SSDT acpi0: wakeup devices SLPB(S4) P32_(S4) UAR1(S4) UAR2(S4) ILAN(S4) PEGP(S4) PEX0(S4) PEX1(S4) PEX2(S4) PEX3(S4) PEX4(S4) PEX5(S4) UHC1(S3) UHC2(S3) UHC3(S3) UHC4(S3) EHCI(S3) EHC2(S3) UH42(S3) UHC5(S3) AZAL(S3) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz, 2397.92 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR,NXE,LONG cpu0: 4MB 64b/line 16-way L2 cache cpu0: apic clock running at 266MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz, 2397.61 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR,NXE,LONG cpu1: 4MB 64b/line 16-way L2 cache ioapic0 at mainbus0 apid 2 pa 0xfec00000, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 2 acpihpet0 at acpi0: 14318179 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 6 (P32_) acpiprt2 at acpi0: bus 1 (PEX0) acpiprt3 at acpi0: bus 2 (PEX1) acpiprt4 at acpi0: bus 3 (PEX2) acpiprt5 at acpi0: bus 4 (PEX3) acpiprt6 at acpi0: bus 5 (PEX4) acpiprt7 at acpi0: bus -1 (PEX5) acpicpu0 at acpi0: FVS, 2394, 1596 MHz acpicpu1 at acpi0: FVS, 2394, 1596 MHz acpibtn0 at acpi0: SLPB pci0 at mainbus0 bus 0: configuration mode 1 pchb0 at pci0 dev 0 function 0 "Intel 82G965 Host" rev 0x02 vga1 at pci0 dev 2 function 0 "Intel 82G965 Video" rev 0x02 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) agp0 at vga1: aperture at 0xd0000000, size 0x10000000 "Intel 82G965 Video" rev 0x02 at pci0 dev 2 function 1 not configured "Intel 82G965 HECI" rev 0x02 at pci0 dev 3 function 0 not configured em0 at pci0 dev 25 function 0 "Intel ICH8 IGP C" rev 0x02: apic 2 int 20 (irq 9), address 00:19:d1:70:4d:73 uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x02: apic 2 int 16 (irq 11) uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x02: apic 2 int 21 (irq 10) ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x02: apic 2 int 18 (irq 11) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x02: apic 2 int 22 (irq 9) azalia0: codec[s]: Sigmatel/0x7618 audio0 at azalia0 ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x02: apic 2 int 17 (irq 255) pci1 at ppb0 bus 1 ppb1 at pci0 dev 28 function 1 "Intel 82801H PCIE" rev 0x02: apic 2 int 16 (irq 255) pci2 at ppb1 bus 2 pciide0 at pci2 dev 0 function 0 "Marvell 88SE6101 IDE" rev 0xb1: DMA (unsupported), channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide0: using apic 2 int 17 (irq 10) for native-PCI interrupt pciide0: channel 0 ignored (not responding; disabled or no drives?) pciide0: channel 1 ignored (not responding; disabled or no drives?) ppb2 at pci0 dev 28 function 2 "Intel 82801H PCIE" rev 0x02: apic 2 int 18 (irq 255) pci3 at ppb2 bus 3 ppb3 at pci0 dev 28 function 3 "Intel 82801H PCIE" rev 0x02: apic 2 int 19 (irq 255) pci4 at ppb3 bus 4 ppb4 at pci0 dev 28 function 4 "Intel 82801H PCIE" rev 0x02: apic 2 int 17 (irq 255) pci5 at ppb4 bus 5 uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x02: apic 2 int 23 (irq 11) uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x02: apic 2 int 19 (irq 11) uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x02: apic 2 int 18 (irq 11) ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x02: apic 2 int 23 (irq 11) usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb5 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xf2 pci6 at ppb5 bus 6 pcib0 at pci0 dev 31 function 0 "Intel 82801H LPC" rev 0x02 pciide1 at pci0 dev 31 function 2 "Intel 82801H SATA" rev 0x02: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide1: using apic 2 int 19 (irq 11) for native-PCI interrupt wd0 at pciide1 channel 0 drive 0: <SAMSUNG HD501LJ> wd0: 16-sector PIO, LBA48, 476940MB, 976773168 sectors wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5 atapiscsi0 at pciide1 channel 1 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <LITE-ON, DVDRW LH-20A1S, 9L03> ATAPI 5/cdrom removable cd0(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5 ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x02: apic 2 int 21 (irq 10) iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-6400CL5 spdmem1 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-6400CL5 spdmem2 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-6400CL5 spdmem3 at iic0 addr 0x53: 1GB DDR2 SDRAM non-parity PC2-6400CL5 pciide2 at pci0 dev 31 function 5 "Intel 82801H SATA" rev 0x02: DMA, channel 0 wired to native-PCI, channel 1 wired to native-PCI pciide2: using apic 2 int 19 (irq 11) for native-PCI interrupt usb2 at uhci0: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci1: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci2: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb5 at uhci3: USB revision 1.0 uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb6 at uhci4: USB revision 1.0 uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 uhidev0 at uhub5 port 1 configuration 1 interface 0 "Logitech Trackball" rev 1.10/2.20 addr 2 uhidev0: iclass 3/1 ums0 at uhidev0: 3 buttons, Z dir wsmouse0 at ums0 mux 0 softraid0 at root root on wd0a swap on wd0b dump on wd0b kqemu: kqemu version 0x00010300 loaded, max locked mem=1690564kB DDB symbols added: 402840 bytes Second warm boot, compatibility mode disabled again: OpenBSD 4.3-current (GENERIC.MP) #31: Tue May 13 06:18:09 PDT 2008 [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 3462197248 (3301MB) avail mem = 3347341312 (3192MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe32f0 (39 entries) bios0: vendor Intel Corp. version "MQ96510J.86A.1709.2007.1010.1926" date 10/10/2007 bios0: Intel Corporation DG965RY acpi0 at bios0: rev 0 acpi0: tables DSDT FACP APIC WDDT MCFG ASF! HPET SSDT SSDT SSDT SSDT SSDT acpi0: wakeup devices SLPB(S4) P32_(S4) UAR1(S4) UAR2(S4) ILAN(S4) PEGP(S4) PEX0(S4) PEX1(S4) PEX2(S4) PEX3(S4) PEX4(S4) PEX5(S4) UHC1(S3) UHC2(S3) UHC3(S3) UHC4(S3) EHCI(S3) EHC2(S3) UH42(S3) UHC5(S3) AZAL(S3) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz, 2397.96 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR,NXE,LONG cpu0: 4MB 64b/line 16-way L2 cache cpu0: apic clock running at 266MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz, 2397.61 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR,NXE,LONG cpu1: 4MB 64b/line 16-way L2 cache ioapic0 at mainbus0 apid 2 pa 0xfec00000, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 2 acpihpet0 at acpi0: 14318179 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 6 (P32_) acpiprt2 at acpi0: bus 1 (PEX0) acpiprt3 at acpi0: bus 2 (PEX1) acpiprt4 at acpi0: bus 3 (PEX2) acpiprt5 at acpi0: bus 4 (PEX3) acpiprt6 at acpi0: bus 5 (PEX4) acpiprt7 at acpi0: bus -1 (PEX5) acpicpu0 at acpi0: FVS, 2394, 1596 MHz acpicpu1 at acpi0: FVS, 2394, 1596 MHz acpibtn0 at acpi0: SLPB pci0 at mainbus0 bus 0: configuration mode 1 pchb0 at pci0 dev 0 function 0 "Intel 82G965 Host" rev 0x02 vga1 at pci0 dev 2 function 0 "Intel 82G965 Video" rev 0x02 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) agp0 at vga1: aperture at 0xd0000000, size 0x10000000 "Intel 82G965 Video" rev 0x02 at pci0 dev 2 function 1 not configured "Intel 82G965 HECI" rev 0x02 at pci0 dev 3 function 0 not configured em0 at pci0 dev 25 function 0 "Intel ICH8 IGP C" rev 0x02: apic 2 int 20 (irq 9), address 00:19:d1:70:4d:73 uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x02: apic 2 int 16 (irq 11) uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x02: apic 2 int 21 (irq 10) ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x02: apic 2 int 18 (irq 11) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x02: apic 2 int 22 (irq 9) azalia0: codec[s]: Sigmatel/0x7618 audio0 at azalia0 ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x02: apic 2 int 17 (irq 255) pci1 at ppb0 bus 1 ppb1 at pci0 dev 28 function 1 "Intel 82801H PCIE" rev 0x02: apic 2 int 16 (irq 255) pci2 at ppb1 bus 2 pciide0 at pci2 dev 0 function 0 "Marvell 88SE6101 IDE" rev 0xb1: DMA (unsupported), channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide0: using apic 2 int 17 (irq 10) for native-PCI interrupt pciide0: channel 0 ignored (not responding; disabled or no drives?) pciide0: channel 1 ignored (not responding; disabled or no drives?) ppb2 at pci0 dev 28 function 2 "Intel 82801H PCIE" rev 0x02: apic 2 int 18 (irq 255) pci3 at ppb2 bus 3 ppb3 at pci0 dev 28 function 3 "Intel 82801H PCIE" rev 0x02: apic 2 int 19 (irq 255) pci4 at ppb3 bus 4 ppb4 at pci0 dev 28 function 4 "Intel 82801H PCIE" rev 0x02: apic 2 int 17 (irq 255) pci5 at ppb4 bus 5 uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x02: apic 2 int 23 (irq 11) uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x02: apic 2 int 19 (irq 11) uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x02: apic 2 int 18 (irq 11) ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x02: apic 2 int 23 (irq 11) usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb5 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xf2 pci6 at ppb5 bus 6 pcib0 at pci0 dev 31 function 0 "Intel 82801H LPC" rev 0x02 ahci0 at pci0 dev 31 function 2 "Intel 82801H AHCI" rev 0x02: apic 2 int 19 (irq 11), AHCI 1.1 scsibus0 at ahci0: 32 targets sd0 at scsibus0 targ 0 lun 0: <ATA, SAMSUNG HD501LJ, CR10> SCSI3 0/direct fixed sd0: 476940MB, 60801 cyl, 255 head, 63 sec, 512 bytes/sec, 976773168 sec total cd0 at scsibus0 targ 1 lun 0: <LITE-ON, DVDRW LH-20A1S, 9L03> ATAPI 5/cdrom removable ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x02: apic 2 int 21 (irq 10) iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-6400CL5 spdmem1 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-6400CL5 spdmem2 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-6400CL5 spdmem3 at iic0 addr 0x53: 1GB DDR2 SDRAM non-parity PC2-6400CL5 usb2 at uhci0: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci1: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci2: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb5 at uhci3: USB revision 1.0 uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb6 at uhci4: USB revision 1.0 uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 uhidev0 at uhub5 port 1 configuration 1 interface 0 "Logitech Trackball" rev 1.10/2.20 addr 2 uhidev0: iclass 3/1 ums0 at uhidev0: 3 buttons, Z dir wsmouse0 at ums0 mux 0 softraid0 at root root on sd0a swap on sd0b dump on sd0b kqemu: kqemu version 0x00010300 loaded, max locked mem=1690524kB DDB symbols added: 402840 bytes