Hi All,
I just tried a -current snapshot from today on one of our HP blades.
The bnx0 SerDes network card works fine (at a first glance), but there
seems to be another problem.
This time it ciss.
The boot hangs quite some time at:
ciss0 at pci7 dev 8 function 0 "Hewlett-Packard Smart Array" rev 0x00: irq
11
and continues like that:
ciss0: big map is not supported, flags=0
The installer bails out 'cause it can't find a hard disk to install to:
You will now initialize the disk(s) that OpenBSD will use. To enable all
available security features you should configure the disk(s) to allow the
creation of separate filesystems for /, /tmp, /var, /usr, and /home.
install: //install.sub[1359]: cannot open 1: No such file or directory
Available disks are: .
Which one is the root disk? (or 'done')
And indeed, it seems he is right:
# fdisk sd0
fdisk: sd0: Device not configured
Any ideas someone?
full dmesg follows:
OpenBSD 4.4-beta (RAMDISK_CD) #75: Sun Jul 6 18:57:04 MDT 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 8576450560 (8179MB)
avail mem = 8329629696 (7943MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xee000 (64 entries)
bios0: vendor HP version "A13" date 04/05/2007
bios0: HP ProLiant BL465c G1
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP SPCR MCFG HPET SPMI APIC SRAT
acpiprt0 at acpi0: bus 2 (IPPB)
acpiprt1 at acpi0: bus 0 (PCI0)
acpiprt2 at acpi0: bus 5 (EXBA)
acpiprt3 at acpi0: bus 12 (EXBB)
acpiprt4 at acpi0: bus 20 (SASB)
acpiprt5 at acpi0: bus 22 (EXBD)
acpiprt6 at acpi0: bus 4 (PCI1)
cpu0 at mainbus0: (uniprocessor)
cpu0: Dual-Core AMD Opteron(tm) Processor 2218, 2600.49 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB
64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully
associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully
associative
pci0 at mainbus0 bus 0: configuration mode 1
iommu0 at cpu0: base 0x80000000 length 512MB pte 0x10cb00000
iommu1 at cpu1: base 0x80000000 length 512MB pte 0x10cb00000
vga1 at pci0 dev 3 function 0 "ATI ES1000" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
"Compaq iLO" rev 0x03 at pci0 dev 4 function 0 not configured
"Compaq iLO" rev 0x03 at pci0 dev 4 function 2 not configured
uhci0 at pci0 dev 4 function 4 "Hewlett-Packard USB" rev 0x00: irq 10
"Hewlett-Packard IPMI" rev 0x00 at pci0 dev 4 function 6 not configured
ppb0 at pci0 dev 5 function 0 "ServerWorks HT-1000 PCI" rev 0x00
pci1 at ppb0 bus 1
ppb1 at pci1 dev 13 function 0 "ServerWorks HT-1000 PCIX" rev 0xc0
pci2 at ppb1 bus 2
bnx0 at pci2 dev 3 function 0 "Broadcom BCM5706S" rev 0x02: irq 10
bnx1 at pci2 dev 4 function 0 "Broadcom BCM5706S" rev 0x02: irq 7
pchb0 at pci0 dev 6 function 0 "ServerWorks HT-1000" rev 0x00
"ServerWorks HT-1000 LPC" rev 0x00 at pci0 dev 6 function 2 not configured
ohci0 at pci0 dev 7 function 0 "ServerWorks HT-1000 USB" rev 0x01: irq 5,
version 1.0, legacy support
ohci1 at pci0 dev 7 function 1 "ServerWorks HT-1000 USB" rev 0x01: irq 5,
version 1.0, legacy support
ehci0 at pci0 dev 7 function 2 "ServerWorks HT-1000 USB" rev 0x01: irq 5
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ServerWorks EHCI root hub" rev 2.00/1.00 addr 1
pchb1 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00
pci3 at pchb1 bus 4
ppb2 at pci3 dev 15 function 0 "ServerWorks HT-2100 PCIE" rev 0xa2
pci4 at ppb2 bus 5
ppb3 at pci3 dev 16 function 0 "ServerWorks HT-2100 PCIE" rev 0xa2
pci5 at ppb3 bus 12
ppb4 at pci3 dev 17 function 0 "ServerWorks HT-2100 PCIE" rev 0xa2
pci6 at ppb4 bus 19
ppb5 at pci6 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xb4
pci7 at ppb5 bus 20
ppb6 at pci7 dev 4 function 0 "ServerWorks HT-1000 PCIX" rev 0xb2
pci8 at ppb6 bus 21
ciss0 at pci7 dev 8 function 0 "Hewlett-Packard Smart Array" rev 0x00: irq
11
ciss0: big map is not supported, flags=0
ppb7 at pci3 dev 18 function 0 "ServerWorks HT-2100 PCIE" rev 0xa2
pci9 at ppb7 bus 22
ppb8 at pci3 dev 19 function 0 "ServerWorks HT-2100 PCIE" rev 0xa2
pci10 at ppb8 bus 25
pchb2 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00
pchb4 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00
pchb5 at pci0 dev 25 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00
pchb6 at pci0 dev 25 function 1 "AMD AMD64 0Fh Address Map" rev 0x00
pchb7 at pci0 dev 25 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00
pchb8 at pci0 dev 25 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Hewlett-Packard UHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci0: USB revision 1.0
uhub2 at usb2 "ServerWorks OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci1: USB revision 1.0
uhub3 at usb3 "ServerWorks OHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
rd0: fixed, 4480 blocks
uhidev0 at uhub1 port 1 configuration 1 interface 0 "HP Virtual Keyboard"
rev 1.10/0.02 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 1 configuration 1 interface 1 "HP Virtual Keyboard"
rev 1.10/0.02
uhidev1: iclass 3/1
uhid at uhidev1 not configured
uhub4 at uhub1 port 2 "HP Virtual Hub" rev 1.10/0.01 addr 3
softraid0 at root
PXE boot MAC address 00:1c:c4:aa:47:fc, interface unknown
root on rd0a swap on rd0b dump on rd0b
bnx1: address 00:1c:c4:aa:57:0a
brgphy0 at bnx1 phy 1: BCM5706 10/100/1000baseT/SX PHY, rev. 2
bnx0: address 00:1c:c4:aa:47:fc
brgphy1 at bnx0 phy 1: BCM5706 10/100/1000baseT/SX PHY, rev. 2
best regards,
Marian
PS.: still CC: me on answer...
