Nick Guenther wrote:
On Tue, Jul 8, 2008 at 10:16 AM, Frank Bax <[EMAIL PROTECTED]> wrote:
I'm trying to install 4.3 on a Dell Core2Duo desktop.
I tried both i386 and amd64 release disks. Both hang during install (see
part of dmesg below).
I was going to try serial console for a full dmesg up to point of failure;
but there is no com port.
I manually typed dmesg from after the usb stuff.
4.3 i386 release:
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckkbd0 at pckbc0 (kbd slot)
pckbcd0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
nxpx0 at isa0 port 0xf/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask fbfd netmask fffd ttymask ffff
rd0: fixed, 3800 blocks
4.3 amd64 release:
isa0 at mainbus0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
I happen to have a i386 snapshot from Jun.27; but that stalls at same point
as i386 release.
What should I try next?
Try to boot the MP kernel. You should be able to pick it from the
install disk's bootloader. Now, it won't run, because it won't find a
root disk, but it should give you an idea if it'll work. For my
Macbook2,1 I actually used a second laptop to do the install on, and
then put the harddrive back in the Mac after setting it to boot
bsd.mp.
-Nick
Thanks! I'm don't know how to boot the MP kernel from install cdrom;
but to remove/replace disks is an easy task; I've even done that before;
not sure why I didn't think of it myself this time. I installed using
another system; then moved disk back to the Dell; which boots fine now.
Here is a dmesg (also sent to dmesg@):
OpenBSD 4.3 (GENERIC) #1368: Wed Mar 12 11:05:31 MDT 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 2136137728 (2037MB)
avail mem = 2062782464 (1967MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xf0000 (50 entries)
bios0: vendor Dell Inc. version "1.0.13" date 03/21/2008
bios0: Dell Inc. Vostro 200
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP HPET MCFG SLIC DMY2 APIC SSDT
acpi0: wakeup devices PEX0(S5) PEX1(S5) PEX2(S5) PEX3(S5) PEX4(S5)
PEX5(S5) HUB0(S5) IGBE(S5) USB0(S3) USB1(S3) USB2(S3) USB3(S3) USB4(S3)
USB5(S3) EHC1(S3) EHC2(S3) AZAL(S5) PCI0(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEX0)
acpiprt2 at acpi0: bus -1 (PEX1)
acpiprt3 at acpi0: bus -1 (PEX2)
acpiprt4 at acpi0: bus -1 (PEX3)
acpiprt5 at acpi0: bus -1 (PEX4)
acpiprt6 at acpi0: bus -1 (PEX5)
acpiprt7 at acpi0: bus 2 (HUB0)
acpicpu0 at acpi0
acpitz0 at acpi0: critical temperature 120 degC
acpibtn0 at acpi0: PWRB
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel(R) Core(TM)2 Duo CPU E4600 @ 2.40GHz, 2394.30 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,CX16,xTPR,NXE,LONG
cpu0: 2MB 64b/line 8-way L2 cache
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "Intel 82G33 Host" rev 0x02
ppb0 at pci0 dev 1 function 0 "Intel 82G33 PCIE" rev 0x02: irq 5
pci1 at ppb0 bus 1
vga1 at pci0 dev 2 function 0 "Intel 82G33 Video" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
em0 at pci0 dev 25 function 0 "Intel ICH9 IFE" rev 0x02: irq 10, address
00:1d:09:9a:69:1a
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: irq 5
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: irq 11
uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x02: irq 11
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x02: irq 9
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x02: irq 3
azalia0: codec[s]: Realtek/0x0888
audio0 at azalia0
uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: irq 4
uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: irq 11
uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: irq 9
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: irq 4
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92
pci2 at ppb1 bus 2
pcib0 at pci0 dev 31 function 0 "Intel 82801IR LPC" rev 0x02
pciide0 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x02: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using irq 11 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <WDC WD5000AAKS-75A7B0>
wd0: 16-sector PIO, LBA48, 476940MB, 976773168 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <Optiarc, DVD+-RW AD-7200S, 101A> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x02: irq 9
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5
spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-5300CL5
pciide1 at pci0 dev 31 function 5 "Intel 82801I SATA" rev 0x02: DMA,
channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide1: using irq 11 for native-PCI interrupt
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
it0 at isa0 port 0x290/8: IT8718F rev 0x03
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
uhidev0 at uhub3 port 2 configuration 1 interface 0 "Dell Dell USB
Keyboard" rev 1.10/3.52 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
