Just wanted to say that with a recent -current snapshot,
Suspend via apm -z and then Resume work fine on my
HPNC4010 now!
That's really a feature I was missing;
4.3 instantly rebooted with acpi, a pre 4.4 current
booted but had issues and now everything seems to work fine!
Thanks for the great work!
Only question I got, when in sleep there's a little noise
like a fan that's trying to spin but gets blocked (could be
something other of course).
btw acpidump core dumps with:
assertion "dp == end" failed: file "/usr/src/usr.sbin/acpidump/asl_dump.c",
line 707, function "asl_dump_defif"
}Abort trap (core dumped)
You can find the core dump and acpidump -o here:
http://w3studi.informatik.uni-stuttgart.de/~mastdk/acpidump.core
http://w3studi.informatik.uni-stuttgart.de/~mastdk/acpi.SSDT.3
http://w3studi.informatik.uni-stuttgart.de/~mastdk/acpi.RSDT.0
http://w3studi.informatik.uni-stuttgart.de/~mastdk/acpi.FACP.1
http://w3studi.informatik.uni-stuttgart.de/~mastdk/acpi.DSDT.2
Here is my dmesg:
$ dmesg
OpenBSD 4.4-current (GENERIC) #1090: Sat Oct 11 15:35:21 MDT 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) M processor 1.60GHz ("GenuineIntel" 686-class)
1.60 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,EST,TM2
real mem = 1006006272 (959MB)
avail mem = 964169728 (919MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 08/30/06, BIOS32 rev. 0 @ 0xf0000,
SMBIOS rev. 2.3 @ 0xfc06f (31 entries)
bios0: vendor Hewlett-Packard version "68BAS Ver. F.30" date 08/30/2006
bios0: Hewlett-Packard HP Compaq nc4010 (PF673AA#ABD)
apm0 at bios0: Power Management spec V1.2 (BIOS managing devices)
apm0: battery life expectancy 1%
apm0: AC on, battery charge low, charging
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x2000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf0840/176 (9 entries)
pcibios0: bad IRQ table checksum
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xff880/176 (9 entries)
pcibios0: PCI Exclusive IRQs: 5 10 11
pcibios0: PCI Interrupt Router at 000:07:0 ("Acer Labs M1533 ISA" rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0xf000 0xd0000/0x2000 0xd2000/0x1000
cpu0 at mainbus0
cpu0: Enhanced SpeedStep 1600 MHz (1340 mV): speeds: 1600, 1400, 1200, 1000,
800, 600 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "ATI RS200M AGP" rev 0x02
ppb0 at pci0 dev 1 function 0 "ATI RS200 PCI" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 5 function 0 "ATI Mobility M6" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
agp at vga1 not configured
autri0 at pci0 dev 6 function 0 "Acer Labs M5451 Audio" rev 0x02: irq 11
ac97: codec id 0x41445374 (Analog Devices AD1981B)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at autri0
midi0 at autri0: <4DWAVE MIDI UART>
pcib0 at pci0 dev 7 function 0 "Acer Labs M1533 ISA" rev 0x00
"Acer Labs M5457 Modem" rev 0x00 at pci0 dev 8 function 0 not configured
iwi0 at pci0 dev 9 function 0 "Intel PRO/Wireless 2200BG" rev 0x05: irq 5,
address 00:16:6f:cd:f3:69
cbb0 at pci0 dev 11 function 0 "O2 Micro OZ711M1 CardBus" rev 0x20: irq 11
cbb1 at pci0 dev 11 function 1 "O2 Micro OZ711M1 CardBus" rev 0x20: irq 11
"O2 Micro OZ711Mx Misc" rev 0x00 at pci0 dev 11 function 2 not configured
pciide0 at pci0 dev 16 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc4: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK4026GAX>
wd0: 16-sector PIO, LBA, 38154MB, 78140160 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide0: channel 1 ignored (disabled)
alipm0 at pci0 dev 17 function 0 "Acer Labs M7101 Power" rev 0x00: 74KHz
clock
iic0 at alipm0
maxtmp0 at iic0 addr 0x4c: max6657
spdmem0 at iic0 addr 0x50: 512MB DDR SDRAM non-parity PC2700CL2.5
spdmem1 at iic0 addr 0x51: 512MB DDR SDRAM non-parity PC2700CL2.5
ohci0 at pci0 dev 18 function 0 "NEC USB" rev 0x43: irq 10, version 1.0
ohci1 at pci0 dev 18 function 1 "NEC USB" rev 0x43: irq 10, version 1.0
ehci0 at pci0 dev 18 function 2 "NEC USB" rev 0x04: irq 10
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "NEC EHCI root hub" rev 2.00/1.00 addr 1
bge0 at pci0 dev 19 function 0 "Broadcom BCM5705M" rev 0x03, BCM5705 A3
(0x3003): irq 10, address 00:12:79:57:e1:50
brgphy0 at bge0 phy 1: BCM5705 10/100/1000baseT PHY, rev. 2
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com2: irq 5 already in use
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi1 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 3 device 0 cacheline 0x0, lattimer 0x20
pcmcia1 at cardslot1
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "NEC OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "NEC OHCI root hub" rev 1.00/1.00 addr 1
biomask ef4d netmask ef6d ttymask ffff
mtrr: Pentium Pro MTRR support
uhidev0 at uhub1 port 1 configuration 1 interface 0 "Logitech USB-PS/2
Optical Mouse" rev 2.00/30.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 8 buttons, Z dir
wsmouse1 at ums0 mux 0
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
iwi0: fatal firmware error
iwi0: fatal firmware error
(ifconfig iwi0 up after sleep works fine)
and a pre 4.4 dmesg:
OpenBSD 4.3-current (GENERIC) #934: Sun Jun 15 11:24:31 MDT 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) M processor 1.60GHz ("GenuineIntel" 686-class) 598
MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,EST,TM2
real mem = 1006006272 (959MB)
avail mem = 964493312 (919MB)
User Kernel Config
UKC> enable acpi
426 acpi0 already enabled
UKC> disable ab\^H \^Hpm
327 apm0 disabled
UKC> quit
Continuing...
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 09/15/04, BIOS32 rev. 0 @ 0xf0000,
SMBIOS rev. 2.3 @ 0xfc06f (31 entries)
bios0: vendor Hewlett-Packard version "68BAS Ver. F.2B" date 09/15/2004
bios0: Hewlett-Packard HP Compaq nc4010 (PF673AA#ABD)
apm at bios0 function 0x15 not configured
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP SSDT
acpi0: wakeup devices C045(S5) C0BA(S0) C184(S0) C189(S0) C18A(S0)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpiprt0 at acpi0: bus 1 (C046)
acpiprt1 at acpi0: bus 0 (C045)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C3, C2, C1, FVS, 1600, 1400, 1200, 1000, 800, 600 MHz
acpitz0 at acpi0: critical temperature 103 degC
acpitz1 at acpi0: critical temperature 103 degC
acpitz2 at acpi0: critical temperature 103 degC
acpibat0 at acpi0: C13A model "Primary" serial 00001 2004/12/20 type LIon
oem "Hewlett-Packard"
acpibat1 at acpi0: C139 not present
acpiac0 at acpi0: AC unit offline
acpibtn0 at acpi0: C13C
acpibtn1 at acpi0: C13B
bios0: ROM list: 0xc0000/0xf000 0xd0000/0x2000 0xd2000/0x1000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "ATI RS200M AGP" rev 0x02
ppb0 at pci0 dev 1 function 0 "ATI RS200 PCI" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 5 function 0 "ATI Mobility M6" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
agp at vga1 not configured
autri0 at pci0 dev 6 function 0 "Acer Labs M5451 Audio" rev 0x02: irq 11
ac97: codec id 0x41445374 (Analog Devices AD1981B)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at autri0
midi0 at autri0: <4DWAVE MIDI UART>
pcib0 at pci0 dev 7 function 0 "Acer Labs M1533 ISA" rev 0x00
"Acer Labs M5457 Modem" rev 0x00 at pci0 dev 8 function 0 not configured
cbb0 at pci0 dev 11 function 0 "O2 Micro OZ711M1 CardBus" rev 0x20: irq 11
cbb1 at pci0 dev 11 function 1 "O2 Micro OZ711M1 CardBus" rev 0x20: irq 11
"O2 Micro OZ711Mx CardBus" rev 0x00 at pci0 dev 11 function 2 not configured
pciide0 at pci0 dev 16 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc4: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK4026GAX>
wd0: 16-sector PIO, LBA, 38154MB, 78140160 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide0: channel 1 ignored (disabled)
alipm0 at pci0 dev 17 function 0 "Acer Labs M7101 Power" rev 0x00: 74KHz
clock
iic0 at alipm0
maxtmp0 at iic0 addr 0x4c: max6657
spdmem0 at iic0 addr 0x50: 512MB DDR SDRAM non-parity PC2700CL2.5
spdmem1 at iic0 addr 0x51: 512MB DDR SDRAM non-parity PC2700CL2.5
ohci0 at pci0 dev 18 function 0 "NEC USB" rev 0x43: irq 10, version 1.0
ohci1 at pci0 dev 18 function 1 "NEC USB" rev 0x43: irq 10, version 1.0
ehci0 at pci0 dev 18 function 2 "NEC USB" rev 0x04: irq 10
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "NEC EHCI root hub" rev 2.00/1.00 addr 1
bge0 at pci0 dev 19 function 0 "Broadcom BCM5705M" rev 0x03, BCM5705 A3
(0x3003): irq 10, address 00:12:79:57:e1:50
brgphy0 at bge0 phy 1: BCM5705 10/100/1000baseT PHY, rev. 2
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com2 at isa0 port 0x3e8/8 irq 5: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi1 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 3 device 0 cacheline 0x0, lattimer 0x20
pcmcia1 at cardslot1
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "NEC OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "NEC OHCI root hub" rev 1.00/1.00 addr 1
biomask ed4d netmask ed4d ttymask ffff
mtrr: Pentium Pro MTRR support
ath0 at cardbus0 dev 0 function 0 "Atheros AR5212" rev 0x01: irq 11
ath0: AR5213 5.9 phy 4.3 rf5112a 3.6, ETSI1W, address 00:40:96:ad:e7:b4
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
acpitz0: _AL3[0] not a object ref
acpitz0: _AL3[0] not a object ref
acpitz0: _AL3[0] not a object ref
acpitz0: _AL3[0] not a object ref
acpitz0: _AL3[0] not a object ref
acpitz0: _AL3[0] not a object ref
