Dirk Mast wrote:
> Just wanted to say that with a recent -current snapshot,
> Suspend via apm -z and then Resume work fine on my
> HPNC4010 now!
>
> That's really a feature I was missing;
> 4.3 instantly rebooted with acpi, a pre 4.4 current
> booted but had issues and now everything seems to work fine!
>
>
> Thanks for the great work!
>
> Only question I got, when in sleep there's a little noise
> like a fan that's trying to spin but gets blocked (could be
> something other of course).
>
>
> btw acpidump core dumps with:
>
> assertion "dp == end" failed: file
> "/usr/src/usr.sbin/acpidump/asl_dump.c", line 707, function
> "asl_dump_defif"
> }Abort trap (core dumped)
Sorry, wrong kernel, apm was enabled, with acpi suspend doesn't work;
but I'm sure, that 4.3-release suspend wasn't possible at all;
not with apm and not with acpi (didn't boot), so it's a nice improvement!
OpenBSD 4.4-current (GENERIC) #1090: Sat Oct 11 15:35:21 MDT 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) M processor 1.60GHz ("GenuineIntel" 686-class) 598
MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,EST,TM2
real mem = 1006006272 (959MB)
avail mem = 964169728 (919MB)
User Kernel Config
UKC> disb\^H \^Hable apm
333 apm0 disabled
UKC> enable acpi
432 acpi0 already enabled
UKC> quit
Continuing...
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 08/30/06, BIOS32 rev. 0 @ 0xf0000,
SMBIOS rev. 2.3 @ 0xfc06f (31 entries)
bios0: vendor Hewlett-Packard version "68BAS Ver. F.30" date 08/30/2006
bios0: Hewlett-Packard HP Compaq nc4010 (PF673AA#ABD)
apm at bios0 function 0x15 not configured
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP SSDT
acpi0: wakeup devices C044(S5) C0B9(S0) C183(S0) C188(S0) C189(S0)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpiprt0 at acpi0: bus 1 (C045)
acpiprt1 at acpi0: bus 0 (C044)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C3, C2, C1, FVS, 1600, 1400, 1200, 1000, 800, 600 MHz
acpitz0 at acpi0: critical temperature 103 degC
acpitz1 at acpi0: critical temperature 103 degC
acpitz2 at acpi0: critical temperature 103 degC
acpibat0 at acpi0: C139 model "Primary" serial 00001 2004/12/20 type LIon
oem "Hewlett-Packard"
acpibat1 at acpi0: C138 not present
acpiac0 at acpi0: AC unit offline
acpibtn0 at acpi0: C13B
acpibtn1 at acpi0: C13A
acpivideo at acpi0 not configured
bios0: ROM list: 0xc0000/0xf000 0xd0000/0x2000 0xd2000/0x1000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "ATI RS200M AGP" rev 0x02
ppb0 at pci0 dev 1 function 0 "ATI RS200 PCI" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 5 function 0 "ATI Mobility M6" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
agp at vga1 not configured
autri0 at pci0 dev 6 function 0 "Acer Labs M5451 Audio" rev 0x02: irq 11
ac97: codec id 0x41445374 (Analog Devices AD1981B)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at autri0
midi0 at autri0: <4DWAVE MIDI UART>
pcib0 at pci0 dev 7 function 0 "Acer Labs M1533 ISA" rev 0x00
"Acer Labs M5457 Modem" rev 0x00 at pci0 dev 8 function 0 not configured
iwi0 at pci0 dev 9 function 0 "Intel PRO/Wireless 2200BG" rev 0x05: irq 5,
address 00:16:6f:cd:f3:69
cbb0 at pci0 dev 11 function 0 "O2 Micro OZ711M1 CardBus" rev 0x20: irq 11
cbb1 at pci0 dev 11 function 1 "O2 Micro OZ711M1 CardBus" rev 0x20: irq 11
"O2 Micro OZ711Mx Misc" rev 0x00 at pci0 dev 11 function 2 not configured
pciide0 at pci0 dev 16 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc4: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK4026GAX>
wd0: 16-sector PIO, LBA, 38154MB, 78140160 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide0: channel 1 ignored (disabled)
alipm0 at pci0 dev 17 function 0 "Acer Labs M7101 Power" rev 0x00: 74KHz
clock
iic0 at alipm0
maxtmp0 at iic0 addr 0x4c: max6657
spdmem0 at iic0 addr 0x50: 512MB DDR SDRAM non-parity PC2700CL2.5
spdmem1 at iic0 addr 0x51: 512MB DDR SDRAM non-parity PC2700CL2.5
ohci0 at pci0 dev 18 function 0 "NEC USB" rev 0x43: irq 10, version 1.0
ohci1 at pci0 dev 18 function 1 "NEC USB" rev 0x43: irq 10, version 1.0
ehci0 at pci0 dev 18 function 2 "NEC USB" rev 0x04: irq 10
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "NEC EHCI root hub" rev 2.00/1.00 addr 1
bge0 at pci0 dev 19 function 0 "Broadcom BCM5705M" rev 0x03, BCM5705 A3
(0x3003): irq 10, address 00:12:79:57:e1:50
brgphy0 at bge0 phy 1: BCM5705 10/100/1000baseT PHY, rev. 2
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com2: irq 5 already in use
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi1 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 3 device 0 cacheline 0x0, lattimer 0x20
pcmcia1 at cardslot1
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "NEC OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "NEC OHCI root hub" rev 1.00/1.00 addr 1
biomask ed4d netmask ed6d ttymask ffff
mtrr: Pentium Pro MTRR support
uhidev0 at uhub1 port 1 configuration 1 interface 0 "Logitech USB-PS/2
Optical Mouse" rev 2.00/30.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 8 buttons, Z dir
wsmouse1 at ums0 mux 0
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
