You are having some interrupt issues. Try GENERIC.MP. If that does not work give -current a try (upgrade to a snapshot; takes less than 5 minutes on this box).
On Wed, Dec 03, 2008 at 07:56:55PM -0800, rizzo0917 wrote: > I knew that !! :) > > dmesg: > OpenBSD 4.4 (GENERIC) #1021: Tue Aug 12 17:16:55 MDT 2008 > [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC > cpu0: AMD Athlon(tm) XP 3000+ ("AuthenticAMD" 686-class, 512KB L2 cache) > 2.18 GHz > cpu0: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE > real mem = 536379392 (511MB) > avail mem = 510222336 (486MB) > mainbus0 at root > bios0 at mainbus0: AT/286+ BIOS, date 08/08/03, BIOS32 rev. 0 @ 0xfbc80, > SMBIOS rev. 2.3 @ 0xf0000 (32 entries) > bios0: vendor Phoenix Technologies, LTD version "TCB418G" date 08/08/2003 > bios0: First International Computer, Inc. Product Name > apm0 at bios0: Power Management spec V1.2 (slowidle) > apm0: AC on, battery charge unknown > acpi at bios0 function 0x0 not configured > pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdd44 > pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdcd0/112 (5 entries) > pcibios0: PCI Exclusive IRQs: 3 5 10 11 12 > pcibios0: no compatible PCI ICU found > pcibios0: Warning, unable to fix up PCI interrupt routing > pcibios0: PCI bus #2 is the last bus > bios0: ROM list: 0xc0000/0xf000 0xef000/0x1000! > cpu0 at mainbus0 > pci0 at mainbus0 bus 0: configuration mode 1 (no bios) > pchb0 at pci0 dev 0 function 0 "NVIDIA nForce2 PCI" rev 0xa2 > "NVIDIA nForce2" rev 0xa2 at pci0 dev 0 function 1 not configured > "NVIDIA nForce2" rev 0xa2 at pci0 dev 0 function 2 not configured > "NVIDIA nForce2" rev 0xa2 at pci0 dev 0 function 3 not configured > "NVIDIA nForce2" rev 0xa2 at pci0 dev 0 function 4 not configured > "NVIDIA nForce2" rev 0xa2 at pci0 dev 0 function 5 not configured > pcib0 at pci0 dev 1 function 0 "NVIDIA nForce2 ISA" rev 0xa4 > nviic0 at pci0 dev 1 function 1 "NVIDIA nForce2 SMBus" rev 0xa2 > iic0 at nviic0 > spdmem0 at iic0 addr 0x51: 512MB DDR SDRAM non-parity PC2700CL2.5 > iic1 at nviic0 > ohci0 at pci0 dev 2 function 0 "NVIDIA nForce2 USB" rev 0xa4: couldn't map > interrupt > ohci1 at pci0 dev 2 function 1 "NVIDIA nForce2 USB" rev 0xa4: couldn't map > interrupt > ehci0 at pci0 dev 2 function 2 "NVIDIA nForce2 USB" rev 0xa4: couldn't map > interrupt > nfe0 at pci0 dev 4 function 0 "NVIDIA nForce2 LAN" rev 0xa1: irq 11, address > 00:40:ca:6d:9c:3c > rlphy0 at nfe0 phy 1: RTL8201L 10/100 PHY, rev. 1 > auich0 at pci0 dev 6 function 0 "NVIDIA nForce2 AC97" rev 0xa1ppb0 at pci0 > dev 8 function 0 "NVIDIA nForce2 PCI-PCI" rev 0xa3 > pci1 at ppb0 bus 1 > bwi0 at pci1 dev 7 function 0 "Broadcom BCM4306" rev 0x03: irq 10, address > 00:0c:41:63:2a:ad > vendor "Acer Labs", unknown product 0x5459 (class communications subclass > modem, rev 0x00) at pci1 dev 8 function 0 not configured > pciide0 at pci0 dev 9 function 0 "NVIDIA nForce2 IDE" rev 0xa2: DMA, channel > 0 configured to compatibility, channel 1 configured to compatibility > wd0 at pciide0 channel 0 drive 0: <WDC WD1600AB-00DYA0> > wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 > atapiscsi0 at pciide0 channel 1 drive 0 > scsibus0 at atapiscsi0: 2 targets, initiator 7 > cd0 at scsibus0 targ 0 lun 0: <SAMSUNG, DVD-ROM SD-816B, H000> ATAPI 5/cdrom > removable > atapiscsi1 at pciide0 channel 1 drive 1 > scsibus1 at atapiscsi1: 2 targets, initiator 7 > cd1 at scsibus1 targ 0 lun 0: <LITE-ON, LTR-48327S, PTS1> ATAPI 5/cdrom > removable > cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 > cd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2 > ppb1 at pci0 dev 30 function 0 "NVIDIA nForce2 AGP" rev 0xa2 > pci2 at ppb1 bus 2 > vga1 at pci2 dev 0 function 0 "NVIDIA GeForce FX 5200" rev 0xa1 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > agp at vga1 not configured > drm at vga1 unsupported > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pcppi0 at isa0 port 0x61 > midi0 at pcppi0: <PC speaker> > spkr0 at pcppi0 > lpt0 at isa0 port 0x378/4 irq 7 > it0 at isa0 port 0x2e/2: IT8712F rev 0x05, EC port 0x290 > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 > fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec > biomask f36d netmask ff6d ttymask ffff > mtrr: Pentium Pro MTRR support > softraid0 at root > root on wd0a swap on wd0b dump on wd0b > WARNING: / was not properly unmounted > OpenBSD 4.4 (GENERIC) #1021: Tue Aug 12 17:16:55 MDT 2008 > [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC > cpu0: AMD Athlon(tm) XP 3000+ ("AuthenticAMD" 686-class, 512KB L2 cache) > 2.18 GHz > cpu0: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE > real mem = 536375296 (511MB) > avail mem = 510218240 (486MB) > mainbus0 at root > bios0 at mainbus0: AT/286+ BIOS, date 08/08/03, BIOS32 rev. 0 @ 0xfbc80, > SMBIOS rev. 2.3 @ 0xf0000 (32 entries) > bios0: vendor Phoenix Technologies, LTD version "TCB418G" date 08/08/2003 > bios0: First International Computer, Inc. Product Name > apm0 at bios0: Power Management spec V1.2 (slowidle) > apm0: AC on, battery charge unknown > acpi at bios0 function 0x0 not configured > pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdd44 > pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdcd0/112 (5 entries) > pcibios0: PCI Exclusive IRQs: 3 5 10 11 > pcibios0: no compatible PCI ICU found > pcibios0: Warning, unable to fix up PCI interrupt routing > pcibios0: PCI bus #2 is the last bus > bios0: ROM list: 0xc0000/0xf000 0xef000/0x1000! > cpu0 at mainbus0 > pci0 at mainbus0 bus 0: configuration mode 1 (no bios) > pchb0 at pci0 dev 0 function 0 "NVIDIA nForce2 PCI" rev 0xa2 > "NVIDIA nForce2" rev 0xa2 at pci0 dev 0 function 1 not configured > "NVIDIA nForce2" rev 0xa2 at pci0 dev 0 function 2 not configured > "NVIDIA nForce2" rev 0xa2 at pci0 dev 0 function 3 not configured > "NVIDIA nForce2" rev 0xa2 at pci0 dev 0 function 4 not configured > "NVIDIA nForce2" rev 0xa2 at pci0 dev 0 function 5 not configured > pcib0 at pci0 dev 1 function 0 "NVIDIA nForce2 ISA" rev 0xa4 > nviic0 at pci0 dev 1 function 1 "NVIDIA nForce2 SMBus" rev 0xa2 > iic0 at nviic0 > spdmem0 at iic0 addr 0x51: 512MB DDR SDRAM non-parity PC2700CL2.5 > iic1 at nviic0 > ohci0 at pci0 dev 2 function 0 "NVIDIA nForce2 USB" rev 0xa4: couldn't map > interrupt > ohci1 at pci0 dev 2 function 1 "NVIDIA nForce2 USB" rev 0xa4: couldn't map > interrupt > ehci0 at pci0 dev 2 function 2 "NVIDIA nForce2 USB" rev 0xa4: couldn't map > interrupt > nfe0 at pci0 dev 4 function 0 "NVIDIA nForce2 LAN" rev 0xa1: irq 11, address > 00:40:ca:6d:9c:3c > rlphy0 at nfe0 phy 1: RTL8201L 10/100 PHY, rev. 1 > auich0 at pci0 dev 6 function 0 "NVIDIA nForce2 AC97" rev 0xa1ppb0 at pci0 > dev 8 function 0 "NVIDIA nForce2 PCI-PCI" rev 0xa3 > pci1 at ppb0 bus 1 > bwi0 at pci1 dev 7 function 0 "Broadcom BCM4306" rev 0x03: irq 10, address > 00:0c:41:63:2a:ad > vendor "Acer Labs", unknown product 0x5459 (class communications subclass > modem, rev 0x00) at pci1 dev 8 function 0 not configured > pciide0 at pci0 dev 9 function 0 "NVIDIA nForce2 IDE" rev 0xa2: DMA, channel > 0 configured to compatibility, channel 1 configured to compatibility > wd0 at pciide0 channel 0 drive 0: <WDC WD1600AB-00DYA0> > wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 > atapiscsi0 at pciide0 channel 1 drive 0 > scsibus0 at atapiscsi0: 2 targets, initiator 7 > cd0 at scsibus0 targ 0 lun 0: <SAMSUNG, DVD-ROM SD-816B, H000> ATAPI 5/cdrom > removable > atapiscsi1 at pciide0 channel 1 drive 1 > scsibus1 at atapiscsi1: 2 targets, initiator 7 > cd1 at scsibus1 targ 0 lun 0: <LITE-ON, LTR-48327S, PTS1> ATAPI 5/cdrom > removable > cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 > cd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2 > ppb1 at pci0 dev 30 function 0 "NVIDIA nForce2 AGP" rev 0xa2 > pci2 at ppb1 bus 2 > vga1 at pci2 dev 0 function 0 "NVIDIA GeForce FX 5200" rev 0xa1 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > agp at vga1 not configured > drm at vga1 unsupported > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pmsi0 at pckbc0 (aux slot) > pckbc0: using irq 12 for aux slot > wsmouse0 at pmsi0 mux 0 > pcppi0 at isa0 port 0x61 > midi0 at pcppi0: <PC speaker> > spkr0 at pcppi0 > lpt0 at isa0 port 0x378/4 irq 7 > it0 at isa0 port 0x2e/2: IT8712F rev 0x05, EC port 0x290 > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 > fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec > biomask e36d netmask ef6d ttymask ffff > mtrr: Pentium Pro MTRR support > softraid0 at root > root on wd0a swap on wd0b dump on wd0b > > > > -- > View this message in context: > http://www.nabble.com/OpenBSD-tp20826040p20826854.html > Sent from the openbsd user - misc mailing list archive at Nabble.com.