You need to boot with -c and then at the UKC> prompt type:
disable apm
Please send that dmesg.
On Fri, Dec 05, 2008 at 08:27:39AM -0800, rizzo0917 wrote:
> I tried the GENERIC.MP, no good, and I upgraded afterwords, still same
> problems. Also I looked at the dmesg and it still looks like its still
> having the interrupt problems
>
> current dmesg
>
> $ dmesg
> OpenBSD 4.4-current (RAMDISK_CD) #1004: Thu Dec 4 12:55:59 MST 2008
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
> cpu0: AMD Athlon(tm) XP 3000+ ("AuthenticAMD" 686-class, 512KB L2 cache)
> 2.18 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
> real mem = 536375296 (511MB)
> avail mem = 512094208 (488MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 08/08/03, BIOS32 rev. 0 @ 0xfbc80,
> SMBIOS rev. 2.3 @ 0xf0000 (32 entries)
> bios0: vendor Phoenix Technologies, LTD version "TCB418G" date 08/08/2003
> bios0: First International Computer, Inc. Product Name
> apm0 at bios0: Power Management spec V1.2
> acpi at bios0 function 0x0 not configured
> pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdd44
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdcd0/112 (5 entries)
> pcibios0: PCI Exclusive IRQs: 3 5 10 11
> pcibios0: no compatible PCI ICU found
> pcibios0: Warning, unable to fix up PCI interrupt routing
> pcibios0: PCI bus #2 is the last bus
> bios0: ROM list: 0xc0000/0xf000 0xef000/0x1000!
> cpu0 at mainbus0: (uniprocessor)
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "NVIDIA nForce2 PCI" rev 0xa2
> "NVIDIA nForce2" rev 0xa2 at pci0 dev 0 function 1 not configured
> "NVIDIA nForce2" rev 0xa2 at pci0 dev 0 function 2 not configured
> "NVIDIA nForce2" rev 0xa2 at pci0 dev 0 function 3 not configured
> "NVIDIA nForce2" rev 0xa2 at pci0 dev 0 function 4 not configured
> "NVIDIA nForce2" rev 0xa2 at pci0 dev 0 function 5 not configured
> pcib0 at pci0 dev 1 function 0 "NVIDIA nForce2 ISA" rev 0xa4
> "NVIDIA nForce2 SMBus" rev 0xa2 at pci0 dev 1 function 1 not configured
> ohci0 at pci0 dev 2 function 0 "NVIDIA nForce2 USB" rev 0xa4: couldn't map
> interrupt
> ohci1 at pci0 dev 2 function 1 "NVIDIA nForce2 USB" rev 0xa4: couldn't map
> interrupt
> ehci0 at pci0 dev 2 function 2 "NVIDIA nForce2 USB" rev 0xa4: couldn't map
> interrupt
> nfe0 at pci0 dev 4 function 0 "NVIDIA nForce2 LAN" rev 0xa1: irq 11, address
> 00:40:ca:6d:9c:3c
> rlphy0 at nfe0 phy 1: RTL8201L 10/100 PHY, rev. 1
> "NVIDIA nForce2 AC97" rev 0xa1 at pci0 dev 6 function 0 not configured
> ppb0 at pci0 dev 8 function 0 "NVIDIA nForce2 PCI-PCI" rev 0xa3
> pci1 at ppb0 bus 1
> bwi0 at pci1 dev 7 function 0 "Broadcom BCM4306" rev 0x03: irq 10, address
> 00:0c:41:63:2a:ad
> vendor "Acer Labs", unknown product 0x5459 (class communications subclass
> modem, rev 0x00) at pci1 dev 8 function 0 not configured
> pciide0 at pci0 dev 9 function 0 "NVIDIA nForce2 IDE" rev 0xa2: DMA, channel
> 0 configured to compatibility, channel 1 configured to compatibility
> wd0 at pciide0 channel 0 drive 0: <WDC WD1600AB-00DYA0>
> wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> atapiscsi0 at pciide0 channel 1 drive 0
> scsibus0 at atapiscsi0: 2 targets, initiator 7
> cd0 at scsibus0 targ 0 lun 0: <SAMSUNG, DVD-ROM SD-816B, H000> ATAPI 5/cdrom
> removable
> atapiscsi1 at pciide0 channel 1 drive 1
> scsibus1 at atapiscsi1: 2 targets, initiator 7
> cd1 at scsibus1 targ 0 lun 0: <LITE-ON, LTR-48327S, PTS1> ATAPI 5/cdrom
> removable
> cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
> cd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
> ppb1 at pci0 dev 30 function 0 "NVIDIA nForce2 AGP" rev 0xa2
> pci2 at ppb1 bus 2
> vga1 at pci2 dev 0 function 0 "NVIDIA GeForce FX 5200" rev 0xa1
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> isa0 at pcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> biomask f3ed netmask ffed ttymask ffff
> rd0: fixed, 3800 blocks
> softraid0 at root
> root on rd0a swap on rd0b dump on rd0b
> cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x28
> SENSE KEY: Media Error
> ASC/ASCQ: ASC 0x11 ASCQ 0x00
> cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x28
> SENSE KEY: Media Error
> ASC/ASCQ: ASC 0x11 ASCQ 0x00
> cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x28
> SENSE KEY: Media Error
> ASC/ASCQ: ASC 0x11 ASCQ 0x00
> cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x28
> SENSE KEY: Media Error
> ASC/ASCQ: ASC 0x11 ASCQ 0x00
> syncing disks...
> OpenBSD 4.4-current (GENERIC.MP) #1186: Thu Dec 4 12:48:38 MST 2008
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
> cpu0: AMD Athlon(tm) XP 3000+ ("AuthenticAMD" 686-class, 512KB L2 cache)
> 2.18 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
> real mem = 536375296 (511MB)
> avail mem = 510320640 (486MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 08/08/03, BIOS32 rev. 0 @ 0xfbc80,
> SMBIOS rev. 2.3 @ 0xf0000 (32 entries)
> bios0: vendor Phoenix Technologies, LTD version "TCB418G" date 08/08/2003
> bios0: First International Computer, Inc. Product Name
> apm0 at bios0: Power Management spec V1.2 (slowidle)
> apm0: AC on, battery charge unknown
> acpi at bios0 function 0x0 not configured
> pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdd44
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdcd0/112 (5 entries)
> pcibios0: PCI Exclusive IRQs: 3 5 10 11
> pcibios0: no compatible PCI ICU found
> pcibios0: Warning, unable to fix up PCI interrupt routing
> pcibios0: PCI bus #2 is the last bus
> bios0: ROM list: 0xc0000/0xf000 0xef000/0x1000!
> cpu0 at mainbus0: (uniprocessor)
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "NVIDIA nForce2 PCI" rev 0xa2
> agp at pchb0 not configured
> "NVIDIA nForce2" rev 0xa2 at pci0 dev 0 function 1 not configured
> "NVIDIA nForce2" rev 0xa2 at pci0 dev 0 function 2 not configured
> "NVIDIA nForce2" rev 0xa2 at pci0 dev 0 function 3 not configured
> "NVIDIA nForce2" rev 0xa2 at pci0 dev 0 function 4 not configured
> "NVIDIA nForce2" rev 0xa2 at pci0 dev 0 function 5 not configured
> pcib0 at pci0 dev 1 function 0 "NVIDIA nForce2 ISA" rev 0xa4
> nviic0 at pci0 dev 1 function 1 "NVIDIA nForce2 SMBus" rev 0xa2
> iic0 at nviic0
> spdmem0 at iic0 addr 0x51: 512MB DDR SDRAM non-parity PC2700CL2.5
> iic1 at nviic0
> ohci0 at pci0 dev 2 function 0 "NVIDIA nForce2 USB" rev 0xa4: couldn't map
> interrupt
> ohci1 at pci0 dev 2 function 1 "NVIDIA nForce2 USB" rev 0xa4: couldn't map
> interrupt
> ehci0 at pci0 dev 2 function 2 "NVIDIA nForce2 USB" rev 0xa4: couldn't map
> interrupt
> nfe0 at pci0 dev 4 function 0 "NVIDIA nForce2 LAN" rev 0xa1: irq 11, address
> 00:40:ca:6d:9c:3c
> rlphy0 at nfe0 phy 1: RTL8201L 10/100 PHY, rev. 1
> auich0 at pci0 dev 6 function 0 "NVIDIA nForce2 AC97" rev 0xa1ppb0 at pci0
> dev 8 function 0 "NVIDIA nForce2 PCI-PCI" rev 0xa3
> pci1 at ppb0 bus 1
> bwi0 at pci1 dev 7 function 0 "Broadcom BCM4306" rev 0x03: irq 10, address
> 00:0c:41:63:2a:ad
> vendor "Acer Labs", unknown product 0x5459 (class communications subclass
> modem, rev 0x00) at pci1 dev 8 function 0 not configured
> pciide0 at pci0 dev 9 function 0 "NVIDIA nForce2 IDE" rev 0xa2: DMA, channel
> 0 configured to compatibility, channel 1 configured to compatibility
> wd0 at pciide0 channel 0 drive 0: <WDC WD1600AB-00DYA0>
> wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> atapiscsi0 at pciide0 channel 1 drive 0
> scsibus0 at atapiscsi0: 2 targets, initiator 7
> cd0 at scsibus0 targ 0 lun 0: <SAMSUNG, DVD-ROM SD-816B, H000> ATAPI 5/cdrom
> removable
> atapiscsi1 at pciide0 channel 1 drive 1
> scsibus1 at atapiscsi1: 2 targets, initiator 7
> cd1 at scsibus1 targ 0 lun 0: <LITE-ON, LTR-48327S, PTS1> ATAPI 5/cdrom
> removable
> cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
> cd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
> ppb1 at pci0 dev 30 function 0 "NVIDIA nForce2 AGP" rev 0xa2
> pci2 at ppb1 bus 2
> vga1 at pci2 dev 0 function 0 "NVIDIA GeForce FX 5200" rev 0xa1
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> isa0 at pcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pmsi0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pmsi0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> it0 at isa0 port 0x2e/2: IT8712F rev 5, EC port 0x290
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> biomask e36d netmask ef6d ttymask ffff
> mtrr: Pentium Pro MTRR support
> softraid0 at root
> root on wd0a swap on wd0b dump on wd0b
>
> --
> View this message in context:
> http://www.nabble.com/OpenBSD-tp20826040p20857548.html
> Sent from the openbsd user - misc mailing list archive at Nabble.com.
