Same situation here. This seems not to work, at least not with this version of the modem (see below, I tried it on several 4.4 release boxes).
Exactly the same behaviour as described by the OP. The third serial port is just "missing" so I could not set up ppp (see man 4 umsm for details on 3rd serial port). BTW, the name of the supported device given in man 4 umsm (Device: Option GlobeTrotter HSDPA ICON225 Bus: USB) might be wrong. I could not verify that Option use names like GlobeTrotter or GlobeSurfer for this item themselves. Option seem to call this device just "iCON 225". GlobeTrotter and GlobeSurfer might be names of different products (while used for iCON 225 by some resellers). In Germany, this item seems to be available branded as web'n'walk Stick from T-Mobile. I think this is the same as the iCON 225 (see text taken from bottom label below - and it looks the same). You might want to make sure it actually works with your setup before purchasing it. Text from bottom sticker: FCC ID NCMOGI0225 Model GI0225 QUALCOMM 3G CDMA Designed in E. U. by Option A few tags for those trying to find information on this item: openbsd misc umsm Qualcomm MSM modem device umsm0 umsm1 umsm2 ucom ucom0 ucom1 ucom2 /dev/cuaU0 /dev/cuaU1 /dev/cuaU2 GI0225-11095 (found on the net, manufacturer ref. according to AMZN or AMZN reseller) USB UMTS EDGE GPRS HSDPA wireless ppp pppd /etc/ppp/ppp.conf > Hi! > > I'm having the same problem, no reply from the ucom0 or ucom 1. > Did you have any luck getting it to work? > (same HW btw) > > Regs, Daniel. > > > > -----Original Message----- > > From: bdz [mailto:b...@fokazsir.hu] > > Sent: Thursday, November 13, 2008 12:44 PM > > To: misc@openbsd.org > > Subject: usb hsdpa modem not working > > > > hi list, > > > > i have a t-mobile usb web'n'walk stuff for testing. i attached it to a > > 4.4 GENERIC and > > realized that first it attaches umsm0 and then immediately deattaches > > it. then umsm0 > > and umsm1 attached along with ucom0 and ucom1. i can open the > > /dev/ttyU[01] but > > they don't respond to any AT commands. > > > > from umsm(4) man page: > > The Option GlobeTrotter HSDPA modem has three serial ports, > > but only the last port can be used to make PPP connections. > > > > i guess i am missing the third serial port (maybe related to the first > > attach/deattach?) > > to be able to open the ppp connection. > > > > any idea? > > > > bdz > > > > usbdevs -v: > > addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), > > Intel(0x8086), rev 1.00 > > port 1 powered > > port 2 powered > > port 3 powered > > port 4 powered > > port 5 powered > > port 6 powered > > Controller /dev/usb2: > > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > > Intel(0x8086), rev 1.00 > > port 1 powered > > port 2 addr 2: full speed, power 100 mA, config 1, Fingerprint > > Sensor(0x2016), TouchStrip(0x147e), rev 0.01 > > Controller /dev/usb3: > > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > > Intel(0x8086), rev 1.00 > > port 1 addr 2: low speed, power 100 mA, config 1, Optical USB > > Mouse(0xc016), Logitech(0x046d), rev 3.40 > > port 2 powered > > Controller /dev/usb4: > > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > > Intel(0x8086), rev 1.00 > > port 1 addr 2: low speed, power 100 mA, config 1, Type 6 > > Keyboard(0x0005), Sun Microsystems(0x0430), rev 1.02 > > port 2 addr 3: full speed, power 500 mA, config 1, Globetrotter HSDPA > > Modem(0x6971), Option N.V.(0x0af0), rev 0.00, iSerialNumber > > Serial Number > > Controller /dev/usb5: > > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > > Intel(0x8086), rev 1.00 > > port 1 powered > > port 2 powered > > > > > > dmesg: > > real mem = 2145669120 (2046MB) > > avail mem = 2066345984 (1970MB) > > mainbus0 at root > > bios0 at mainbus0: AT/286+ BIOS, date 08/22/07, BIOS32 rev. 0 > > @ 0xfdc70, > > SMBIOS rev. 2.4 @ 0xe0010 (71 entries) > > bios0: vendor LENOVO version "7KET71WW (1.21 )" date 08/22/2007 > > bios0: LENOVO 8918B8G > > acpi0 at bios0: rev 2 > > acpi0: tables DSDT FACP SSDT ECDT TCPA APIC MCFG HPET SLIC BOOT SSDT > > SSDT SSDT SSDT > > acpi0: wakeup devices LID_(S3) SLPB(S3) LURT(S3) DURT(S3) IGBE(S4) > > EXP0(S4) EXP1(S4) EXP2(S4) EXP3(S4) EXP4(S4) PCI1(S4) > > USB0(S3) USB1(S3) > > USB2(S3) USB3(S3) USB4(S3) EHC0(S3) EHC1(S3) HDEF(S4) > > acpitimer0 at acpi0: 3579545 Hz, 24 bits > > acpihpet0 at acpi0: 14318179 Hz > > acpiprt0 at acpi0: bus 0 (PCI0) > > acpiprt1 at acpi0: bus 1 (AGP_) > > acpiprt2 at acpi0: bus 2 (EXP0) > > acpiprt3 at acpi0: bus 3 (EXP1) > > acpiprt4 at acpi0: bus 4 (EXP2) > > acpiprt5 at acpi0: bus 5 (EXP3) > > acpiprt6 at acpi0: bus 13 (EXP4) > > acpiprt7 at acpi0: bus 21 (PCI1) > > acpiec0 at acpi0 > > acpicpu0 at acpi0: C3, C2 > > acpitz0 at acpi0: critical temperature 127 degC > > acpitz1 at acpi0: critical temperature 100 degC > > acpibtn0 at acpi0: LID_ > > acpibtn1 at acpi0: SLPB > > acpibat0 at acpi0: BAT0 model "42T4513" serial 5561 type > > LION oem "SANYO" > > acpibat1 at acpi0: BAT1 not present > > acpiac0 at acpi0: AC unit online > > acpithinkpad0 at acpi0 > > acpidock at acpi0 not configured > > acpivideo at acpi0 not configured > > acpivideo at acpi0 not configured > > bios0: ROM list: 0xc0000/0xf000 0xcf000/0x1000 0xd0000/0x1000 > > 0xe0000/0x10000! > > cpu0 at mainbus0 > > cpu0: unknown Enhanced SpeedStep CPU, msr 0x06170b2d06000b2d > > cpu0: using only highest and lowest power states > > cpu0: Enhanced SpeedStep 2200 MHz (1420 mV): speeds: 2200, 1200 MHz > > pci0 at mainbus0 bus 0: configuration mode 1 (no bios) > > pchb0 at pci0 dev 0 function 0 "Intel GM965 Host" rev 0x0c > > ppb0 at pci0 dev 1 function 0 "Intel GM965 PCIE" rev 0x0c: irq 10 > > pci1 at ppb0 bus 1 > > vga1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x0429 > > rev 0xa1 > > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > > agp0 at vga1: no integrated graphics > > drm at vga1 unsupported > > em0 at pci0 dev 25 function 0 "Intel ICH8 IGP M" rev 0x03: irq 11, > > address 00:15:58:cb:d4:f4 > > uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x03: irq 11 > > uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x03: irq 11 > > ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x03: irq 11 > > usb0 at ehci0: USB revision 2.0 > > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > > azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev > > 0x03: irq 11 > > azalia0: RIRB time out > > azalia0: RIRB time out > > azalia0: codec[s]: Analog Devices AD1984, Conexant/0x2bfa, > > using Analog > > Devices AD1984 > > audio0 at azalia0 > > ppb1 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x03: irq 11 > > pci2 at ppb1 bus 2 > > ppb2 at pci0 dev 28 function 1 "Intel 82801H PCIE" rev 0x03: irq 11 > > pci3 at ppb2 bus 3 > > iwn0 at pci3 dev 0 function 0 "Intel Wireless WiFi Link 4965AGN" rev > > 0x61: irq 11, MoW2, address 00:13:e8:ed:2c:cd > > ppb3 at pci0 dev 28 function 2 "Intel 82801H PCIE" rev 0x03: irq 11 > > pci4 at ppb3 bus 4 > > ppb4 at pci0 dev 28 function 3 "Intel 82801H PCIE" rev 0x03: irq 11 > > pci5 at ppb4 bus 5 > > ppb5 at pci0 dev 28 function 4 "Intel 82801H PCIE" rev 0x03: irq 11 > > pci6 at ppb5 bus 13 > > uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x03: irq 10 > > uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x03: irq 11 > > uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x03: irq 11 > > ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x03: irq 11 > > usb1 at ehci1: USB revision 2.0 > > uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > > ppb6 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xf3 > > pci7 at ppb6 bus 21 > > cbb0 at pci7 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xba: irq 10 > > "Ricoh 5C832 Firewire" rev 0x04 at pci7 dev 0 function 1 not > > configured > > sdhc0 at pci7 dev 0 function 2 "Ricoh 5C822 SD/MMC" rev 0x21: irq 11 > > sdmmc0 at sdhc0 > > "Ricoh 5C843 MMC" rev 0x11 at pci7 dev 0 function 3 not configured > > "Ricoh 5C592 Memory Stick" rev 0x11 at pci7 dev 0 function 4 > > not configured > > "Ricoh 5C852 xD" rev 0x11 at pci7 dev 0 function 5 not configured > > cardslot0 at cbb0 slot 0 flags 0 > > cardbus0 at cardslot0: bus 22 device 0 cacheline 0x0, lattimer 0xb0 > > pcmcia0 at cardslot0 > > ichpcib0 at pci0 dev 31 function 0 "Intel 82801HBM LPC" rev 0x03: PM > > disabled > > pciide0 at pci0 dev 31 function 1 "Intel 82801HBM IDE" rev 0x03: DMA, > > channel 0 configured to compatibility, channel 1 configured > > to compatibility > > atapiscsi0 at pciide0 channel 0 drive 0 > > scsibus0 at atapiscsi0: 2 targets, initiator 7 > > cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD-RAM UJ-850, RB11> ATAPI > > 5/cdrom removable > > cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 > > pciide0: channel 1 ignored (disabled) > > ahci0 at pci0 dev 31 function 2 "Intel 82801HBM AHCI" rev > > 0x03: irq 10, > > AHCI 1.1 > > scsibus1 at ahci0: 32 targets, initiator 32 > > sd0 at scsibus1 targ 0 lun 0: <ATA, FUJITSU MHW2160B, 0084> SCSI3 > > 0/direct fixed > > sd0: 152627MB, 19457 cyl, 255 head, 63 sec, 512 bytes/sec, > > 312581808 sec > > total > > ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev > > 0x03: irq 11 > > iic0 at ichiic0 > > usb2 at uhci0: USB revision 1.0 > > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > usb3 at uhci1: USB revision 1.0 > > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > usb4 at uhci2: USB revision 1.0 > > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > usb5 at uhci3: USB revision 1.0 > > uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > usb6 at uhci4: USB revision 1.0 > > uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > isa0 at ichpcib0 > > isadma0 at isa0 > > pckbc0 at isa0 port 0x60/5 > > pckbd0 at pckbc0 (kbd slot) > > pckbc0: using irq 1 for kbd slot > > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > > pms0 at pckbc0 (aux slot) > > pckbc0: using irq 12 for aux slot > > wsmouse0 at pms0 mux 0 > > pcppi0 at isa0 port 0x61 > > midi0 at pcppi0: <PC speaker> > > spkr0 at pcppi0 > > aps0 at isa0 port 0x1600/31 > > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > > biomask edfd netmask edfd ttymask ffff > > mtrr: Pentium Pro MTRR support > > uhidev0 at uhub4 port 1 configuration 1 interface 0 "Sun Microsystems > > Type 6 Keyboard" rev 1.00/1.02 addr 2 > > uhidev0: iclass 3/1 > > ukbd0 at uhidev0: 8 modifier keys, 6 key codes, layout 32 > > wskbd1 at ukbd0 mux 1 > > wskbd1: connecting to wsdisplay0 > > ugen0 at uhub2 port 2 "TouchStrip Fingerprint Sensor" rev > > 1.00/0.01 addr 2 > > uhidev1 at uhub3 port 1 configuration 1 interface 0 "Logitech Optical > > USB Mouse" rev 2.00/3.40 addr 2 > > uhidev1: iclass 3/1 > > ums0 at uhidev1: 3 buttons, Z dir > > wsmouse1 at ums0 mux 0 > > softraid0 at root > > root on sd0a swap on sd0b dump on sd0b > > kqemu: kqemu version 0x00010300 loaded, max locked mem=1047688kB > > DDB symbols added: 320656 bytes > > umsm0 at uhub4 port 2 configuration 1 interface 0 "Option N.V. > > Globetrotter HSDPA Modem" rev 1.10/0.00 addr 3 > > umsm0 detached > > umsm0 at uhub4 port 2 configuration 1 interface 0 "Option N.V. > > Globetrotter HSDPA Modem" rev 1.10/0.00 addr 3 > > ucom0 at umsm0 > > umsm1 at uhub4 port 2 configuration 1 interface 1 "Option N.V. > > Globetrotter HSDPA Modem" rev 1.10/0.00 addr 3 > > ucom1 at umsm1 -- Jetzt 1 Monat kostenlos! GMX FreeDSL - Telefonanschluss + DSL f|r nur 17,95 Euro/mtl.!* http://dsl.gmx.de/?ac=OM.AD.PD003K11308T4569a
