The option didn't helped. As You can see:
(II) SMI(0): VESA BIOS not detected
(WW) SMI(0): VBE initialization failed: falling back to UseBIOS disabled.
I was trying to force monitor by 'Option "monitor-LVDS" "My
monitor"' but i didn't helped...
Cheers.
Xorg.0.log:
(--) checkDevMem: using aperture driver /dev/xf86
(--) Using wscons driver on /dev/ttyC0 in pcvt compatibility mode (version 3.32)
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: OpenBSD 4.5 i386
Current Operating System: OpenBSD xxx 4.5 GENERIC i386
Build Date: 17 March 2009 06:30:55AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Mar 18 21:29:50 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "My Monitor"
(**) | |-->Device "Silicon Motion Lynx family"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(==) Not automatically adding devices
(==) Not automatically enabling devices
(==) Including the default font path
/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/TTF/,/usr/X11R6/lib/X11/fonts/OTF,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/100dpi/,/usr/X11R6/lib/X11/fonts/75dpi/.
(**) FontPath set to:
/usr/X11R6/lib/X11/fonts/misc/,
/usr/X11R6/lib/X11/fonts/TTF/,
/usr/X11R6/lib/X11/fonts/OTF,
/usr/X11R6/lib/X11/fonts/Type1/,
/usr/X11R6/lib/X11/fonts/100dpi/,
/usr/X11R6/lib/X11/fonts/75dpi/,
/usr/X11R6/lib/X11/fonts/misc/,
/usr/X11R6/lib/X11/fonts/TTF/,
/usr/X11R6/lib/X11/fonts/OTF,
/usr/X11R6/lib/X11/fonts/Type1/,
/usr/X11R6/lib/X11/fonts/100dpi/,
/usr/X11R6/lib/X11/fonts/75dpi/
(==) ModulePath set to "/usr/X11R6/lib/modules"
(II) Loader magic: 0x3c01e540
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on openbsd
(--) PCI:*(0...@0:9:0) Silicon Motion LynxEM+ rev 160, Mem @ 0xfd000000/0
(II) System resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) "extmod" will be loaded. This was enabled by default and also
specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also
specified in the config file.
(II) "glx" will be loaded by default.
(II) "freetype" will be loaded. This was enabled by default and also
specified in the config file.
(II) "dri" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.5.3, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(==) AIGLX enabled
(==) Exporting typical set of GLX visuals
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "siliconmotion"
(II) Loading /usr/X11R6/lib/modules/drivers//siliconmotion_drv.so
(II) Module siliconmotion: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.7.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 4.1
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.3.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(II) LoadModule: "kbd"
(II) Loading /usr/X11R6/lib/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.3.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(II) SMI: driver (version 1.7.0) for Silicon Motion Lynx chipsets: Lynx,
LynxE, Lynx3D, LynxEM, LynxEM+, Lynx3DM, Cougar3DR, MSOC
(II) Primary Device is: PCI 0...@00:09:0
(WW) Falling back to old probe method for siliconmotion
(--) Assigning device section with no busID to primary device
(--) Chipset LynxEM+ found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 0.1.0
ABI class: X.Org Video Driver, version 4.1
(**) SMI(0): Depth 16, (--) framebuffer bpp 16
(==) SMI(0): RGB weight 565
(==) SMI(0): Default visual is TrueColor
(**) SMI(0): Option "UseBIOS" "True"
(==) SMI(0): PCI Burst enabled
(==) SMI(0): PCI Retry enabled
(==) SMI(0): Using Hardware Cursor
(**) SMI(0): Option: UseBIOS enabled.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(==) SMI(0): Write-combining range (0xa0000,0x20000) was already clear
(==) SMI(0): Write-combining range (0xc0000,0x40000) was already clear
(II) SMI(0): Primary V_BIOS segment is: 0xc000
(==) SMI(0): Write-combining range (0x0,0x1000) was already clear
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.1.0
ABI class: X.Org Video Driver, version 4.1
(II) SMI(0): VESA BIOS not detected
(WW) SMI(0): VBE initialization failed: falling back to UseBIOS disabled.
(--) SMI(0): Chipset: "LynxEM+"
(==) SMI(0): Dual head disabled
(==) SMI(0): Using XAA acceleration architecture
(--) SMI(0): videoram: 2048kB
(II) SMI(0): Cursor Offset: 001FFC00
(II) SMI(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) SMI(0): Write-combining range (0xa0000,0x10000) was already clear
(II) SMI(0): Reserved: 001FF800
(II) SMI(0): TFT Panel Size = 800x600
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) SMI(0): I2C bus "I2C bus" initialized.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(==) SMI(0): Using gamma correction (1.0, 1.0, 1.0)
(II) SMI(0): MCLK = 157.000
(II) SMI(0): Output LVDS using monitor section My Monitor
(II) SMI(0): Output VGA has no monitor section
(II) SMI(0): I2C device "I2C bus:ddc2" registered at address 0xA0.
(II) SMI(0): I2C device "I2C bus:ddc2" removed.
(--) SMI(0): No DDC signal
(II) SMI(0): Output LVDS connected
(II) SMI(0): Output VGA connected
(II) SMI(0): Using user preference for initial modes
(II) SMI(0): Output LVDS using initial mode 800x600
(II) SMI(0): Output VGA using initial mode 800x600
(==) SMI(0): Write-combining range (0x0,0x1000) was already clear
(==) SMI(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.2.1
ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) SMI(0): Cursor Offset: 001FFC00
(II) SMI(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) SMI(0): Write-combining range (0xa0000,0x10000) was already clear
(II) SMI(0): Reserved: 001FF800
(WW) SMI(0): invalid frequency 157.000 MHz [freq <= 135.000 MHz]
(II) SMI(0): FrameBuffer Box: 0,0 - 1024,1023
(II) SMI(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
8x8 color pattern filled rectangles
CPU to Screen color expansion
Solid Horizontal and Vertical Lines
(II) SMI(0): DPMS enabled
(II) SMI(0): I2C device "I2C bus:SAA 7111A" registered at address 0x48.
(II) SMI(0): I2C device "I2C bus:SAA 7111A" removed.
(II) SMI(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/X11R6/lib/modules/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) SMI(0): Setting screen physical size to 211 x 158
(**) Option "Protocol" "wsmouse"
(**) Mouse1: Protocol: wsmouse
(**) Option "CorePointer"
(**) Mouse1: always reports core events
(**) Option "Device" "/dev/wsmouse"
(==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse1: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse1: Buttons: 11
(**) Option "CoreKeyboard"
(**) Keyboard1: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard1: XkbModel: "pc105"
(**) Option "XkbLayout" "pl"
(**) Keyboard1: XkbLayout: "pl"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) evaluating device (Mouse1)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) evaluating device (Keyboard1)
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
On Wed, Mar 18, 2009 at 5:32 AM, Matthieu Herrb <mhe...@gmail.com> wrote:
> On Tue, Mar 17, 2009 at 1:30 PM, comfooc <comf...@gmail.com> wrote:
>> Hi,
>> I've installed latest siliconmotion driver from
>>
>> http://cgit.freedesktop.org/xorg/driver/xf86-video-siliconmotion/commit/?id=05480382c508bd27c1755405518ce9c339f0f80e
>>
>> and reconfigured X again. So now there is no "AddScreen/ScreenInit
>> failed for driver 0", everything seems to load fine, no errors at the
>> output but screen goes an stays black (no power)...
>>
>> Any clue, info that would help?
>>
>
> Try to set 'Option "UseBIOS" "True"'
>
> And insert the log inline not as attachement...
> --
> Matthieu Herrb
