Hi, guys, I have a console line, which is serial console (RS232) on USB. It works well with minicom in my ubuntu 8.04 when I connect it to my netscreen-5xt. But, it can't work with my OpenBSD 4.2. Due to my command line "usbdevs -dv" output, I configure it as these below "Serial Device : /dev/usb1" , Bits setting is "9600 8N1", turn off "hardware Flow Contol ". Unlikely, it can't work.
------------------------------------- My /var/log/messages output is : Apr 20 23:48:00 uestc /bsd: ugen0 at uhub1 port 2 Apr 20 23:48:00 uestc /bsd: Apr 20 23:48:00 uestc /bsd: ugen0: vendor 0x1a86 USB2.0-Ser!, rev 1.10/2.54, addr 2 ------------------------------------------ My usbdevs output is : Controller /dev/usb0: addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), Intel(0x8086), rev 1.00 uhub0 port 1 powered port 2 powered port 3 powered port 4 powered port 5 powered port 6 powered port 7 powered port 8 powered Controller /dev/usb1: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00 uhub1 port 1 powered port 2 addr 2: full speed, power 96 mA, config 1, USB2.0-Ser!(0x7523), vendor 0x1a86(0x1a86), rev 2.54 ugen0 Controller /dev/usb2: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00 uhub2 port 1 powered port 2 powered Controller /dev/usb3: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00 uhub3 port 1 powered port 2 powered Controller /dev/usb4: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00 uhub4 port 1 powered port 2 powered
