On 2009-06-03, Renaud Allard <ren...@allard.it> wrote:
> I have just bought a Fabia FX5621 board which has amongst others, two
> Agere ET1310 interfaces. I configured one interface and it negotiated
> correctly with my switch at 1000mbps full duplex. However, I am not able
> to ping the interface from anywhere else and I am not able to ping from
> the interface either. The ARP table seems always empty. I used tcpdump
> to sniff the traffic while pinging and doing some broadcasts and saw
> nothing in the tcpdump output.
> Has someone else noticed this kind of behavior with this chipset?
watch "systat vmstat" then ping -f it from another machine.
what irq is triggering? is it associated with the et(4)?
is it the same for both et?
> rl0 at pci0 dev 9 function 0 "Realtek 8139" rev 0x10: apic 1 int 16 (irq
> 11), address 00:04:a7:08:9a:c6
> rlphy0 at rl0 phy 0: RTL internal PHY
wow, pretty unusual to see rl(4) on a PCIE board... do those all work ok?
On 2009-06-03, Renaud Allard <ren...@allard.it> wrote:
> Hello,
>
> I have just bought a Fabia FX5621 board which has amongst others, two
> Agere ET1310 interfaces. I configured one interface and it negotiated
> correctly with my switch at 1000mbps full duplex. However, I am not able
> to ping the interface from anywhere else and I am not able to ping from
> the interface either. The ARP table seems always empty. I used tcpdump
> to sniff the traffic while pinging and doing some broadcasts and saw
> nothing in the tcpdump output.
> Has someone else noticed this kind of behavior with this chipset?
>
> here is my dmesg:
> OpenBSD 4.5 (GENERIC) #1749: Sat Feb 28 14:51:18 MST 2009
> dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: VIA Eden Processor 1000MHz ("CentaurHauls" 686-class) 1 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,CMOV,PAT,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,TM,SBF,SSE3,EST,TM2,xTPR
> real mem = 1039757312 (991MB)
> avail mem = 997048320 (950MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 01/16/09, BIOS32 rev. 0 @ 0xf0010,
> SMBIOS rev. 2.5 @ 0xfc390 (47 entries)
> bios0: vendor American Megatrends Inc. version "080014" date 01/16/2009
> acpi at bios0 function 0x0 not configured
> mpbios0 at bios0: Intel MP Specification 1.4
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: RNG AES AES-CTR SHA1 SHA256 RSA
> cpu0: apic clock running at 99MHz
> mpbios0: bus 0 is type PCI
> mpbios0: bus 1 is type PCI
> mpbios0: bus 128 is type PCI
> mpbios0: bus 129 is type PCI
> mpbios0: bus 130 is type PCI
> mpbios0: bus 131 is type ISA
> ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 3, 24 pins
> pcibios0 at bios0: rev 3.0 @ 0xf0000/0x10000
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf5780/336 (19 entries)
> pcibios0: no compatible PCI ICU found: ICU vendor 0x1106 product 0x3287
> pcibios0: Warning, unable to fix up PCI interrupt routing
> pcibios0: PCI bus #130 is the last bus
> bios0: ROM list: 0xc0000/0xfe00
> cpu0: unknown Enhanced SpeedStep CPU, msr 0x04090a0904000a09
> cpu0: using only highest and lowest power states
> cpu0: Enhanced SpeedStep 1333 MHz (844 mV): speeds: 1333, 533 MHz
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "VIA CN700 Host" rev 0x00
> viaagp0 at pchb0: v3
> agp0 at viaagp0: aperture at 0xe0000000, size 0x10000000
> pchb1 at pci0 dev 0 function 1 "VIA CN700 Host" rev 0x00
> pchb2 at pci0 dev 0 function 2 "VIA CN700 Host" rev 0x00
> pchb3 at pci0 dev 0 function 3 "VIA PT890 Host" rev 0x00
> pchb4 at pci0 dev 0 function 4 "VIA CN700 Host" rev 0x00
> pchb5 at pci0 dev 0 function 7 "VIA CN700 Host" rev 0x00
> ppb0 at pci0 dev 1 function 0 "VIA VT8377 AGP" rev 0x00
> pci1 at ppb0 bus 1
> vga1 at pci1 dev 0 function 0 "VIA S3 Unichrome PRO IGP" rev 0x01
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> ral0 at pci0 dev 8 function 0 "Ralink RT2561S" rev 0x00: apic 1 int 16
> (irq 11), address 00:12:0e:61:49:24
> ral0: MAC/BBP RT2561C, RF RT5225
> rl0 at pci0 dev 9 function 0 "Realtek 8139" rev 0x10: apic 1 int 16 (irq
> 11), address 00:04:a7:08:9a:c6
> rlphy0 at rl0 phy 0: RTL internal PHY
> rl1 at pci0 dev 10 function 0 "Realtek 8139" rev 0x10: apic 1 int 17
> (irq 10), address 00:04:a7:08:9a:c5
> rlphy1 at rl1 phy 0: RTL internal PHY
> rl2 at pci0 dev 11 function 0 "Realtek 8139" rev 0x10: apic 1 int 18
> (irq 5), address 00:04:a7:08:9a:c4
> rlphy2 at rl2 phy 0: RTL internal PHY
> rl3 at pci0 dev 12 function 0 "Realtek 8139" rev 0x10: apic 1 int 19
> (irq 3), address 00:04:a7:08:9a:c3
> rlphy3 at rl3 phy 0: RTL internal PHY
> ahci0 at pci0 dev 15 function 0 vendor "VIA", unknown product 0x6287 rev
> 0x20: apic 1 int 21 (irq 10), AHCI 1.0
> scsibus0 at ahci0: 32 targets
> sd0 at scsibus0 targ 0 lun 0: <ATA, ST9500325AS, 0001> SCSI3 0/direct fixed
> sd0: 476940MB, 512 bytes/sec, 976773168 sec total
> pciide0 at pci0 dev 15 function 1 "VIA VT82C571 IDE" rev 0x07: DMA,
> channel 0 configured to compatibility, channel 1 configured to compatibility
> pciide0: channel 0 disabled (no drives)
> wd0 at pciide0 channel 1 drive 0: <ELITE PRO CF CARD 16GB>
> wd0: 1-sector PIO, LBA, 15391MB, 31522176 sectors
> wd0(pciide0:1:0): using PIO mode 4, DMA mode 2
> uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x91: apic 1 int
> 20 (irq 11)
> ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x90: apic 1 int 22
> (irq 5)
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1
> viapm0 at pci0 dev 17 function 0 "VIA VT8251 ISA" rev 0x00
> iic0 at viapm0
> spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-6400CL5
> pchb6 at pci0 dev 17 function 7 "VIA VT8251 VLINK" rev 0x00
> ppb1 at pci0 dev 19 function 0 "VIA VT8251 PCIE" rev 0x00
> pci2 at ppb1 bus 128
> ppb2 at pci2 dev 0 function 0 "VIA VT8251 PCIE" rev 0x00
> pci3 at ppb2 bus 130
> et0 at pci3 dev 0 function 0 "AT&T/Lucent ET1310" rev 0x01: apic 1 int
> 17 (irq 11), address 00:04:a7:04:e6:a4
> etphy0 at et0 phy 0: ET1011 10/100/1000baseT PHY, rev. 2
> ppb3 at pci2 dev 0 function 1 "VIA VT8251 PCIE" rev 0x00
> pci4 at ppb3 bus 129
> et1 at pci4 dev 0 function 0 "AT&T/Lucent ET1310" rev 0x03: apic 1 int
> 16 (irq 11), address 00:04:a7:04:e5:5e
> etphy1 at et1 phy 0: ET1011 10/100/1000baseT PHY, rev. 2
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at mainbus0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> com0: console
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> it0 at isa0 port 0x2e/2: IT8712F rev 8, EC port 0xa10
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> softraid0 at root
> root on wd0a swap on wd0b dump on wd0b
